WTB 3.08 Posi 12 bolt for 70 in AL - The 1947 - Present Chevrolet & GMC Truck Message Board Network

grayw0lf · 05-22-2008, 06:29 PM

Its time to look again, but with disgusting gas prices, I'm looking for a coil spring 12 bolt to fit my 1970 C-10 (6 lug) w/ 3.08 & very preferabley a Posi unit.

Must be w/in 100 miles or so of Clanton.

killer71 · 05-22-2008, 06:33 PM

have you considered the upgrade kit...very reasonable!

grayw0lf · 05-28-2008, 10:18 PM

Quote:

Originally Posted by killer71

have you considered the upgrade kit...very reasonable!

I currently have a 4 series carrier, so I'd have change out everything.

BTW, anyone want to trade their 3.08 for my 4.56?

**JQ-72** · 05-29-2008, 01:14 AM

I've got a '72 3.08 single traction coil rear. It's out of a 130K, 1 owner truck. Since yours is a '70, you can use this rear and slide in your 6 lug axles (70-72 axles are same width - 70 is 6 lug, 71-2 are 5). $150. I'm about 30 minutes from the I-65 Athens exit.
Joshua

grayw0lf · 05-29-2008, 02:59 AM

Quote:

Originally Posted by JQ-72

I've got a '72 3.08 single traction coil rear. It's out of a 130K, 1 owner truck. Since yours is a '70, you can use this rear and slide in your 6 lug axles (70-72 axles are same width - 70 is 6 lug, 71-2 are 5). $150. I'm about 30 minutes from the I-65 Athens exit.
Joshua

Thanks, but at $4.00/gallon, 360+ miles round trip is too far for a non-posi unit.

grayw0lf · 06-03-2008, 09:57 AM

Anyone? Someone has to have a decent 3.08 posi they can part with.

5 lug would work too.

05-22-2008, 06:29 PM	#1
grayw0lf Registered User Join Date: Apr 2004 Location: Clanton, AL Posts: 1,253	WTB 3.08 Posi 12 bolt for 70 in AL Its time to look again, but with disgusting gas prices, I'm looking for a coil spring 12 bolt to fit my 1970 C-10 (6 lug) w/ 3.08 & very preferabley a Posi unit. Must be w/in 100 miles or so of Clanton. __________________ 85' CUCV M1009!!! The newest addition! 6.2diesel, Th400, NP208, & only 36k miles! 70' C-10 LWB Fleetside - Looking good these days! 05' Dodge Neon 88' Winner Escape Sport 1750 - 4.3v6 94' Seadoo SP 84' Honda TRX200, bare nekkid. Just a frame & tires. Always looking for another project or any good deal!

05-22-2008, 06:33 PM	#2
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: WTB 3.08 Posi 12 bolt for 70 in AL have you considered the upgrade kit...very reasonable! __________________ R.I.P. Killer 71 10/26/07

05-29-2008, 01:14 AM	#4
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,628	Re: WTB 3.08 Posi 12 bolt for 70 in AL I've got a '72 3.08 single traction coil rear. It's out of a 130K, 1 owner truck. Since yours is a '70, you can use this rear and slide in your 6 lug axles (70-72 axles are same width - 70 is 6 lug, 71-2 are 5). $150. I'm about 30 minutes from the I-65 Athens exit. Joshua __________________ 72 Cheyenne Super swb. Factory 402/400,tach,posi,AM/FM, A/C. Adding cruise, 8-track 72 Cheyenne Super swb. 350/350 A/C, bucket seats 72 Cheyenne swb. Factory 402/400, tilt, posi, A/C 72 Cheyenne Super K-10. 350/4 spd., posi. 72 Suburban 350/350 tilt, tach, AM/FM, A/C, luggage rack 72 GMC Sierra lwb. 350/350, A/C. medium green/olive interior

06-03-2008, 09:57 AM	#6
grayw0lf Registered User Join Date: Apr 2004 Location: Clanton, AL Posts: 1,253	Re: WTB 3.08 Posi 12 bolt for 70 in AL Anyone? Someone has to have a decent 3.08 posi they can part with. 5 lug would work too. __________________ 85' CUCV M1009!!! The newest addition! 6.2diesel, Th400, NP208, & only 36k miles! 70' C-10 LWB Fleetside - Looking good these days! 05' Dodge Neon 88' Winner Escape Sport 1750 - 4.3v6 94' Seadoo SP 84' Honda TRX200, bare nekkid. Just a frame & tires. Always looking for another project or any good deal!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.