|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
06-06-2008, 11:19 PM
|
#1 |
|
1971 4X4
Join Date: Jan 2008
Location: Winona, MN
Posts: 112
|
Shock Replacement ????
I got a 2001 HD and I'm thinking its time to replace the front shocks. I crawled under the truck tonight and saw the control arms(?) resting on the bump stops on the frame (orangish/yellow rubber bumper attached to the frame). Or is this the way it is suppose to be?
Also, I was told that the inner tie rods are loose and need to be replaced. How difficult is this to do myself? Thanks
__________________
MN ROOKY 1971 Chevy 3/4 4X4, 4" lift, 33's  2001 Chevy 3/4 4X4 HD, 33's (Wife's Truck) |
|
|
|
06-07-2008, 11:46 AM
|
#2 |
|
On the fast track to nowhere..
Join Date: May 2006
Location: Splendora, Texas
Posts: 5,316
|
Re: Shock Replacement ????
It's normal for the bump stop to touch the control arm, they are sort of a progressive stop if you will. I don't find the inners too difficult. Assuming you have rack and pinion steering you will most likley need a special tool to get them off. It should be available at most any parts store.
__________________
-Mike Owen- Norwood, Houston, Cecilia, Jackson, Monroe and counting |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
