Bent pushrods? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**bigsnookmaster** · 06-07-2008, 02:18 PM

Might be lifters that are bleeding down at low rpms,then pumping up as it revs.Good luck

Slammed70 · 06-07-2008, 05:13 PM

Quote:

Originally Posted by bigsnookmaster

Might be lifters that are bleeding down at low rpms,then pumping up as it revs.Good luck

Thats what I was thinking, lay some towels around and yank a valve cover while its running and check to see (if)how much oil is sqirting up though the pushrods to the rockers.

06-07-2008, 02:18 PM	#1
bigsnookmaster Senior Member Join Date: Jan 2008 Location: St.Petersburg,Fl Posts: 1,273	Re: Bent pushrods? Might be lifters that are bleeding down at low rpms,then pumping up as it revs.Good luck __________________ greg http://community.webshots.com/user/68406Stepside



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.