WTB: emblems - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 05-27-2008, 01:55 AM

Looking for any odd or unusual emblems for my collection. Anything from 67-72 chevy or gmc. 1/2 ton thru the c-60 series. Condition is not real important, may even have broken studs. There are a few canadian ones i am looking for also. Whatcha got?? Thanks, Eric

Jerry Jones · 05-27-2008, 02:34 AM

Interesting inquiry, you should post some the goodies you come up with!

**Ironhorse** · 05-27-2008, 02:35 AM

Don't have pics loaded right now but I have three "CustomCamper/20" fender emblems if interested. All three have studs intact, two a little nicer than the third but all are presentable and driver quality. Would take $22.50 shipped for all three. Can do pics if needed.

**too much stuff** · 05-27-2008, 03:54 AM

Jerry, i have posted pics of my collection in the past. Getting so many new members i figure i should ask every so often.

Ironhorse, are these the ones you had for sale awhile back? I think you had a pic up then?

**special-K** · 05-27-2008, 02:08 PM

Eric,you better show it again so people realize what you mean by "unusual" ones you don`t have,yet.This man is bein` havin`him some emblem all up in that.

**too much stuff** · 05-27-2008, 03:39 PM

GMC AMI, glad you found out what the bezels were. I am sitting pretty good for the cheyenne 10 emblems right now. Thanks.

Tim, there are a few that could be upgraded on my board, so we will see what turns up...

**Ironhorse** · 05-27-2008, 04:39 PM

I did have pics up sometime back on the CustomCamper/20 emblems but when our computer was stolen during the home burglary I lost the pics to the computer. Have not gotten around to taking more pics of the emblems. Let me know if you are interested and I will dig the emblems out of the parts shed. You may already have these type.

**too much stuff** · 05-29-2008, 05:56 AM

Ironhorse, thanks for the offer, but it looks like i have some extras of those.
Still looking...

**too much stuff** · 05-30-2008, 06:07 AM

Ok you canadian members, i need a 940, 950, and an upper door "custom" emblem for sure. Among others i could upgrade...

low'n slow · 05-30-2008, 06:31 AM

Old "full" beer cans wanted? or will empty ones suffice?

**too much stuff** · 06-01-2008, 01:24 AM

Up for the weekend...

**too much stuff** · 06-02-2008, 05:55 PM

Ttt

**too much stuff** · 06-04-2008, 06:13 PM

One more time...

**too much stuff** · 06-06-2008, 11:02 PM

ttt

1969stepside · 06-07-2008, 12:23 AM

what do u want

**too much stuff** · 06-07-2008, 04:27 PM

Quote:

Originally Posted by 1969stepside

what do u want

Basically any emblems that were not common. To me, C-10, C20. Cheyenne10, GMC 1500 V-8 were the more common ones. Hard to find would be like the CST/30, or cheyenne30, or most of the gmc 3500 series. There are also some canadian ones that are tough to find such as 920, 930, 940, 950, 960. And also an upper door custom emblem. Where do you start and stop? I have a good sized display board with my emblems. The reason i am asking in general is maybe something half common will turn up that may be nicer than my display. I have a few with only 1 peg, or bad pitting etc. Hope that answers your question.

68GMCCustom · 06-07-2008, 05:02 PM

all that I have other then some GMC letters

**Classic Heartbeat** · 06-07-2008, 05:10 PM

Here are a couple of hard ones to find... WES

**too much stuff** · 06-07-2008, 05:42 PM

68gmc custom. That emblem appears better than the one i have. How are the studs on it? Something you are selling?
Wes. the 292 emblems are pretty tough to find. Teeitup set me up with a pair awhile back. Look about the same condition. Your custom emblem looks thin compared to mine. Are you sure that is from a 67-72?
Thanks for the replies, Eric

68GMCCustom · 06-07-2008, 09:28 PM

somewhere along the line they cut off the studs. PO had it glue to the fender. WIW?

I have some of the "Custom" script emblems too...but not sure I want to turn loose of those.

**too much stuff** · 06-07-2008, 10:00 PM

Bummer the studs were cut off. Not really worth much now. Might be worth hanging on your garage wall however. The custom script emblems are tough to find with all the pegs. I don't blame you for hanging on to those. Thanks, Eric

68GMCCustom · 06-08-2008, 12:11 AM

OK. I was wondering if the GMC 1500 V-SIX emblems were even reproduced or not, but based on your comments I'm guessing they still have next to zero value unless in GC. I'll add it to the garage art.

I like to debadge my truck as much as possible (already have) but have wanted to add the "Custom" scripts (rechromed 1st) back on the truck when it's completed. I'm considering putting them about 7/8 up and centered, on the inside of the door panels (probably custom panels).

**too much stuff** · 06-08-2008, 12:25 AM

I don't believe they are reproduced. Just not highly sought after. I believe the custom emblems are contoured to fit the outside of your door. Just an FYI for you.

05-27-2008, 01:55 AM	#1
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	WTB: emblems Looking for any odd or unusual emblems for my collection. Anything from 67-72 chevy or gmc. 1/2 ton thru the c-60 series. Condition is not real important, may even have broken studs. There are a few canadian ones i am looking for also. Whatcha got?? Thanks, Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

05-27-2008, 02:34 AM	#2
Jerry Jones Happy Camper Join Date: Feb 2006 Location: Northern California Posts: 8,407	Re: WTB: emblems Interesting inquiry, you should post some the goodies you come up with! __________________ RIP El Jay! Love you brother!

05-27-2008, 02:35 AM	#3
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: WTB: emblems Don't have pics loaded right now but I have three "CustomCamper/20" fender emblems if interested. All three have studs intact, two a little nicer than the third but all are presentable and driver quality. Would take $22.50 shipped for all three. Can do pics if needed. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

05-27-2008, 03:54 AM	#4
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: WTB: emblems Jerry, i have posted pics of my collection in the past. Getting so many new members i figure i should ask every so often. Ironhorse, are these the ones you had for sale awhile back? I think you had a pic up then? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

05-27-2008, 02:08 PM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: WTB: emblems Eric,you better show it again so people realize what you mean by "unusual" ones you don`t have,yet.This man is bein` havin`him some emblem all up in that. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-27-2008, 03:39 PM	#6
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: WTB: emblems GMC AMI, glad you found out what the bezels were. I am sitting pretty good for the cheyenne 10 emblems right now. Thanks. Tim, there are a few that could be upgraded on my board, so we will see what turns up... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

05-27-2008, 04:39 PM	#7
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: WTB: emblems I did have pics up sometime back on the CustomCamper/20 emblems but when our computer was stolen during the home burglary I lost the pics to the computer. Have not gotten around to taking more pics of the emblems. Let me know if you are interested and I will dig the emblems out of the parts shed. You may already have these type. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

05-29-2008, 05:56 AM	#8
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: WTB: emblems Ironhorse, thanks for the offer, but it looks like i have some extras of those. Still looking... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

05-30-2008, 06:07 AM	#9
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: WTB: emblems Ok you canadian members, i need a 940, 950, and an upper door "custom" emblem for sure. Among others i could upgrade... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

05-30-2008, 06:31 AM	#10
low'n slow Too Dumb To Know Better Join Date: Nov 2005 Location: Texas Posts: 883	Re: WTB: emblems Old "full" beer cans wanted? or will empty ones suffice?

06-01-2008, 01:24 AM	#11
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: WTB: emblems Up for the weekend... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

06-02-2008, 05:55 PM	#12
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: WTB: emblems Ttt __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

06-04-2008, 06:13 PM	#13
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: WTB: emblems One more time... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

06-06-2008, 11:02 PM	#14
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: WTB: emblems ttt __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

06-07-2008, 12:23 AM	#15
1969stepside Registered User Join Date: Feb 2008 Location: Johnson City Tennessee Posts: 1,207	Re: WTB: emblems what do u want __________________ Greater love hath no man than to lay down his life for a friend. Members i Have met Earl Slick68 1969 Stepside Build thread http://67-72chevytrucks.com/vboard/s...=1#post4253546 Chevy Trucks the longest lasting most dependable trucks on the road



Register or Log In To remove these advertisements.

06-07-2008, 05:02 PM	#17
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: WTB: emblems all that I have other then some GMC letters __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

06-07-2008, 05:10 PM	#18
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Re: WTB: emblems Here are a couple of hard ones to find... WES Attached Images __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

06-07-2008, 05:42 PM	#19
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: WTB: emblems 68gmc custom. That emblem appears better than the one i have. How are the studs on it? Something you are selling? Wes. the 292 emblems are pretty tough to find. Teeitup set me up with a pair awhile back. Look about the same condition. Your custom emblem looks thin compared to mine. Are you sure that is from a 67-72? Thanks for the replies, Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

06-07-2008, 09:28 PM	#20
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: WTB: emblems somewhere along the line they cut off the studs. PO had it glue to the fender. WIW? I have some of the "Custom" script emblems too...but not sure I want to turn loose of those. __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

06-07-2008, 10:00 PM	#21
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: WTB: emblems Bummer the studs were cut off. Not really worth much now. Might be worth hanging on your garage wall however. The custom script emblems are tough to find with all the pegs. I don't blame you for hanging on to those. Thanks, Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

06-08-2008, 12:11 AM	#22
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: WTB: emblems OK. I was wondering if the GMC 1500 V-SIX emblems were even reproduced or not, but based on your comments I'm guessing they still have next to zero value unless in GC. I'll add it to the garage art. I like to debadge my truck as much as possible (already have) but have wanted to add the "Custom" scripts (rechromed 1st) back on the truck when it's completed. I'm considering putting them about 7/8 up and centered, on the inside of the door panels (probably custom panels). __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

06-08-2008, 12:25 AM	#23
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: WTB: emblems I don't believe they are reproduced. Just not highly sought after. I believe the custom emblems are contoured to fit the outside of your door. Just an FYI for you. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

Register or Log In To remove these advertisements.