fastburn heads

[edin355]

I have a set of complete new aluminum gm fast burn heads for sale. $700 plus shipping. these are new heads in the box.You can go to any site that sales heads and get the low down on them.edin355

[meathead95]

whats the part number?

[Billla]

I believe the P/N is 12464298; if this is the case, then these a screamin' deal on some great heads for a mondo 350 or strong 383/400! "Fast Burn" has been applied to a bunch of different castings, however...

From the GMPP 2008 catalog:

When it comes time to own the street, this is the head for you!
GM Performance Parts has brought together all of our new
technologies to create the ultimate 23˚ small-block GM cylinder
head. Fast Burn technology maximizes combustion of the air/
fuel mixture, resulting in higher cylinder pressures and more
power production. The combustion chamber (62cc) is designed
for flat top pistons, and the head requires no additional porting for
optimum performance, so it provides maximum “out-of-the-box”
performance. Recommended for any standard coolant flow 1955–
2000 283–400 cubic inch small-block, the Fast Burn head helps
us make 425 horsepower from our own ZZ383 crate engine!

• CNC-machined aluminum performance head
• Completely assembled with 2.00"/1.55" valves
• 210cc intake port, roof raised .240"
• 78cc D-shaped exhaust ports, raised .200", requires
Fel-Pro® gasket #1470 (may require minor trimming)
• 62cc combustion chamber, .400" thick deck (can be
milled safely .060")
• No heat riser
• Angled spark plugs (5/8" hex, 3/4" reach, tapered plugs)
• 1.48" Valve spring seat diameter
• Use head gaskets with stainless steel fire rings
• Raised, machined rocker rails
• 0.530" max valve lift (without modifications)
• Screw-in studs, (3/8" top, 7/16" bottom)
• Dual bolt patterns for perimeter bolt and center-bolt
valve covers
• Dual bolt patterns for both Vortec and early model
intake manifolds
• Use production intake gasket P/N 12529094 for Vortec
intakes or dual bolt pattern intake gasket P/N 12497760
for either early model or Vortec design manifolds
(Fel-Pro® #1289 and #1207 may be used)

[edin355]

Originally Posted by meathead95

whats the part number?

Billla somes it up. Thanks Billla for your input. These are new in the box. Satisfaction gauranteed.edin355

[lindsey]

Are you willing to ship these to AZ??? I am interested.

[edin355]

Originally Posted by lindsey

Are you willing to ship these to AZ??? I am interested.

Yes I would be willing to ship to AZ. I will find out the shipping cost today and get back with you. thanks edin355

[FormerMember]

2nd in line. Shipping to 03036 please.

[edin355]

Originally Posted by edin355

Yes I would be willing to ship to AZ. I will find out the shipping cost today and get back with you. thanks edin355

Shipping to AZ would be about $55 for a 3 day shipping.Hope this helps you out. edin355

[edin355]

Originally Posted by grendel

2nd in line. Shipping to 03036 please.

Shipping to you would be about $55. edin355

[FormerMember]

Originally Posted by edin355

Shipping to you would be about $55. edin355

Thanks. I'll take them, if it comes to me.

[edin355]

Originally Posted by grendel

Thanks. I'll take them, if it comes to me.

If I havent heard from lindsey by the end of today the heads will be yours. We can get together and make the necessary arrangements to get them to you. edin355

[FormerMember]

Originally Posted by edin355

If I havent heard from lindsey by the end of today the heads will be yours. We can get together and make the necessary arrangements to get them to you. edin355

Sounds good. They will go well in my GMC.

[edin355]

Originally Posted by grendel

Sounds good. They will go well in my GMC.

The heads are yours for the taken. edin355

[FormerMember]

I responded to your PM

[edin355]

Just wanted to say thanks to Billla for help on this.I really appreciate his help. And thanks to grendal. I hope the heads bring you what you expect.Will be waiting to hear how things go. edin355