big block id number question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fredico · 06-08-2008, 03:24 PM

bought a stock 1972 chevy c30 cheyenne super longhorn outside of sacramento california. got home to va. yesterday w/replacing only the starter motor and radiator. a few spots w/minor surface rust but no rot through anywhere. i was told that the engine (402 ci, option number L47), trans (turbo hydra-matic, option number M49), and rear end numbers matched. haven't been under it yet to read the cast numbers (97 degrees today,too hot). the engine id number is TI16TKX. can anyone identify the engine by this number OR a web site to reference? thanks.

mr48chev · 06-08-2008, 05:43 PM

The proper casting # for the block should be 3999290

Here are a few links to engine id sites that I have used in the past.
http://www.yearone.com/updatedsingle.../engine_id.htm

http://www.tracyvette.com/engineid.html

http://www.mortec.com/

**uncle** · 06-08-2008, 09:29 PM

Nice truck.

JimKshortstep4x4 · 06-09-2008, 05:40 AM

Nice truck!

The stamping code TI16TKX listed decodes as follows:

T=Tonawanda engine plant
I= ? month date code usually is (2) numbers and not a letter
16= 16th day of the month
TKX= 1972 Truck, 402 210 HP w/TH 400 transmission, L-47 used in C-20 and C-30 trucks

This is one of the sites that I use:

http://www.nastyz28.com/sbchevy/sblock.php

Jim

Longhorn Man · 06-09-2008, 06:33 AM

and I am moving this from the suburban page, to the truck page.
Sweet longhorn... only 2450 C/30 longhorns built

06-08-2008, 03:24 PM	#1
fredico Registered User Join Date: Jun 2007 Location: Bluemont, Virginia Posts: 274	big block id number question bought a stock 1972 chevy c30 cheyenne super longhorn outside of sacramento california. got home to va. yesterday w/replacing only the starter motor and radiator. a few spots w/minor surface rust but no rot through anywhere. i was told that the engine (402 ci, option number L47), trans (turbo hydra-matic, option number M49), and rear end numbers matched. haven't been under it yet to read the cast numbers (97 degrees today,too hot). the engine id number is TI16TKX. can anyone identify the engine by this number OR a web site to reference? thanks. Attached Images

06-08-2008, 05:43 PM	#2
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,451	Re: big block id number question The proper casting # for the block should be 3999290 Here are a few links to engine id sites that I have used in the past. http://www.yearone.com/updatedsingle.../engine_id.htm http://www.tracyvette.com/engineid.html http://www.mortec.com/

06-08-2008, 09:29 PM	#3
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,286	Re: big block id number question Nice truck.

06-09-2008, 05:40 AM	#4
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: big block id number question Nice truck! The stamping code TI16TKX listed decodes as follows: T=Tonawanda engine plant I= ? month date code usually is (2) numbers and not a letter 16= 16th day of the month TKX= 1972 Truck, 402 210 HP w/TH 400 transmission, L-47 used in C-20 and C-30 trucks This is one of the sites that I use: http://www.nastyz28.com/sbchevy/sblock.php Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC

06-09-2008, 06:33 AM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: big block id number question and I am moving this from the suburban page, to the truck page. Sweet longhorn... only 2450 C/30 longhorns built Last edited by Longhorn Man; 06-09-2008 at 06:33 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.