One more Piece of the puzzle - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigjimzlll · 06-17-2008, 04:39 PM

I can't tell from the pic, but what spline are the sumer's axels? I run a set that are 17 spline but are very thick. The problem is you can't get a spool to fit them.

PA-IndianRider · 06-17-2008, 11:41 PM

Quote:

Originally Posted by bigjimzlll

I can't tell from the pic, but what spline are the sumer's axels? I run a set that are 17 spline but are very thick. The problem is you can't get a spool to fit them.

I'm going to pickup the rearend later this week (bought it from the same guy I got the Weld wheels & slicks from - Craigs List).... so I'll let ya know then.

Another bonus.... a long-time drag racing friend of mine who runs a 9 second Mustang (all motor) is on-board to help me figure all this stuff out and has been using a 9" F**D rearend and done a couple of back-halfs.

One thing I have learned is you cannot BUY experience.... that's just one of the MANY reasons this forum ROCKS!!!!

lowriden58 · 06-25-2008, 12:34 PM

Weld still offers a 15x5 with 5x5 pattern, not sure if that backspace would work or not. worth checking into

http://www.weldracing.com/wheels/det...loy%20Polished

06-17-2008, 04:39 PM	#1
bigjimzlll Senior Member Join Date: Dec 2001 Location: Redding,CA...USA Posts: 4,736	Re: One more Piece of the puzzle I can't tell from the pic, but what spline are the sumer's axels? I run a set that are 17 spline but are very thick. The problem is you can't get a spool to fit them. __________________ It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA Last edited by bigjimzlll; 06-17-2008 at 04:40 PM.*

06-25-2008, 12:34 PM	#3
lowriden58 Registered User Join Date: Jan 2008 Location: Chesapeake Beach, MD Posts: 812	Re: One more Piece of the puzzle Weld still offers a 15x5 with 5x5 pattern, not sure if that backspace would work or not. worth checking into http://www.weldracing.com/wheels/det...loy%20Polished __________________ 71 cheyenne lwb 300rwhp best 1/4 time so far 12.8 @103 http://i195.photobucket.com/albums/z...en58/001-2.jpg



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.