4spd/Rockwell to TH350/205 swap

[Hallz]

Thanks guys,

Yeah I have the flexplate, I do need to buy a new stock converter though. I am only swapping out to a auto so it will be easier for the woman to drive. Even then if it was not for the whine in the transfer case or trans I would just have her get use to it. But from the reading the Rockwell is a b!t<h to get parts for so I figured it would be easier to swap it vs repair it.

Any tips on isolating the whine to the transfercase or tranny?

Also, I may hold off a bit till I put a small lift on it to clear the 35's I got with the truck.

[FormerMember]

Originally Posted by Hallz

Also, I may hold off a bit till I put a small lift on it to clear the 35's I got with the truck.

The lift would affect driveline length. I would do it once, at the same time, if you're going to do it.

[hdflstf]

Don't forget to remove the pilot bushing from the crankshaft, otherwise the torque converter will never fit.