Dropmember-60-62 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

PBFAB.COM · 06-12-2008, 12:12 AM

Finally finished up the Dropmember for the torsion bar chassis. Now the 60-62 guys can bolt-on a Dropmember!

The only "complicated" part is re-drilling the rear most mounting hole for the main crossmember... the factory hole is located too close to the middle hole. A template is provided in the kit.

joe231 · 06-12-2008, 12:21 AM

very cool!!
you have a price yet?

PBFAB.COM · 06-12-2008, 12:22 AM

Quote:

Originally Posted by joe231

very cool!!
you have a price yet?

This kit runs the same as the other front Dropmembers... $1425. Supporting board members get a 5% discount.

dieselarmy13 · 06-12-2008, 12:33 AM

I can now drop my 60

Now I just have to get a dropmember for my 72 and find my 60

On a serious note, my wife hates you.

62ChevyStep · 06-12-2008, 12:42 AM

That is SICK!!!! Thanks Porter for not forgetting about us oddballs (60-62)

I will be getting in touch with you here shortly to get one ordered.

colin_havens · 06-12-2008, 12:45 AM

Quote:

Originally Posted by dieselarmy13

I can now drop my 60

Now I just have to get a dropmember for my 72 and find my 60

On a serious note, my wife hates you.

Glad to see Im not the only one! i wish you could see the look on her face when I told her I absolutely HAVE to have "this part for my truck" When i told her how much it was, she flipped out. As she put it, there is nothing wrong with my truck now, and she saw no reason to spent that kind of money on something that wasnt necessary, and my truck "wasnt broke, so why change it" She may not ever understand, but eventually she will give in and I can join the dropmember club. She gave me some ammo for my argument since she just bought a damn elliptical excersise machine that cost about the same as the dropmember. I will wear her down!

Back to the topic, NICE WORK! I just wish I could make anything that looks as good as you do!

**scotts62** · 06-12-2008, 07:22 AM

Quote:

Originally Posted by colin_havens

Glad to see Im not the only one! i wish you could see the look on her face when I told her I absolutely HAVE to have "this part for my truck" When i told her how much it was, she flipped out. As she put it, there is nothing wrong with my truck now, and she saw no reason to spent that kind of money on something that wasnt necessary, and my truck "wasnt broke, so why change it" She may not ever understand, but eventually she will give in and I can join the dropmember club. She gave me some ammo for my argument since she just bought a damn elliptical excersise machine that cost about the same as the dropmember. I will wear her down!

Back to the topic, NICE WORK! I just wish I could make anything that looks as good as you do!

Watch out, she can do it but you can't

Very nice job on the dropmember i may add

72BlckButy · 06-12-2008, 08:00 AM

best of luck to you colin_havens...

Nice work Nate, that thing turned out great!

**ChiefRocka** · 06-12-2008, 09:41 AM

Very nice !!!

GRIMSS · 06-19-2008, 10:43 PM

Very nice work. '55-59 next?

Longstep70 · 06-20-2008, 12:37 PM

Quote:

Originally Posted by GRIMSS

Very nice work. '55-59 next?

yes please...you're only a year off now, so close..

*Shane* · 06-20-2008, 01:16 PM

if mama ain't happy then no one's happy ...

great work Nathan as aways! you're fab work motivates me to work harder on my jalopy.

stunna · 06-20-2008, 02:16 PM

Nate has done it AGAIN!!

slash crashley · 06-21-2008, 05:48 PM

Quote:

Originally Posted by colin_havens

She gave me some ammo for my argument since she just bought a damn elliptical excersise machine that cost about the same as the dropmember. I will wear her down!

just wait until the elliptical machine eventually becomes a coat rack, sell it on craigslist for 60% of it's value and use that $$$ towards the drop member.

by then she won't even wanna talk about the elliptical machine or the drop member

06-12-2008, 12:12 AM	#1
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Dropmember-60-62 Finally finished up the Dropmember for the torsion bar chassis. Now the 60-62 guys can bolt-on a Dropmember! The only "complicated" part is re-drilling the rear most mounting hole for the main crossmember... the factory hole is located too close to the middle hole. A template is provided in the kit. Attached Images __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

06-12-2008, 12:21 AM	#2
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Dropmember60-62 very cool!! you have a price yet? __________________ *CHEVY ONLY*

06-12-2008, 12:33 AM	#4
dieselarmy13 Phone's ringin Dude. Join Date: Mar 2007 Location: Colorado Springs Posts: 1,426	Re: Dropmember60-62 I can now drop my 60 Now I just have to get a dropmember for my 72 and find my 60 On a serious note, my wife hates you. __________________ I pitty the fool with only two headlights!! 2003 SILVERADO SS--THE NEW GIRL 1972 GMC--THE OLD GIRL

06-12-2008, 12:42 AM	#5
62ChevyStep Senior Member Join Date: May 2005 Location: Portales, NM Posts: 359	Re: Dropmember60-62 That is SICK!!!! Thanks Porter for not forgetting about us oddballs (60-62) I will be getting in touch with you here shortly to get one ordered. __________________ ________________________ 62' 3.5/5 drop SWB Fleet, PS, PB-Dsk/Drm,350/700R4 08' Chevrolet Silverado CrewCab 05'Toyota Tacoma Prerunner SR5

06-12-2008, 08:00 AM	#8
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Dropmember60-62 best of luck to you colin_havens... Nice work Nate, that thing turned out great! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

06-12-2008, 09:41 AM	#9
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,151	Re: Dropmember60-62 Very nice !!! __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

06-19-2008, 10:43 PM	#10
GRIMSS --------------- Join Date: Mar 2008 Location: Central Missouri Posts: 1,791	Re: Dropmember60-62 Very nice work. '55-59 next? __________________ 2001 GMC SIERRA 1956 Chevy Panel *Build Page* with a Scott's Hotrods IFS 1953 Chevy trucks *Project Dime Time* 1968 Camaro 1968 Volksrod "NOBACK" 55-59 one piece window *Video* 55-59 one piece window *template files* Jared

06-20-2008, 01:16 PM	#12
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Dropmember60-62 if mama ain't happy then no one's happy ... great work Nathan as aways! you're fab work motivates me to work harder on my jalopy.

06-20-2008, 02:16 PM	#13
stunna Registered User Join Date: Nov 2006 Location: high point nc Posts: 442	Re: Dropmember60-62 Nate has done it AGAIN!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.