New member with request for your pics and opinions on two different drops

[MedicineMan]

Hi, Thanks for your help. I did some searching and didn't find exactly what I'm needing to know and I'm sweating the first decision in my build that involves some check writing!! I'm dropping the front of my '68 longbed by 2 1/2" using Early classic drop spindles with a disc brake conversion and I don't know which drop springs to use in the rear, 3" or 4". I want to level front to back or possibly have a slight rake. I'm scared that I will end up with a rear lower than the front or that it will be too slammed for what I want. And I'm hearing that possibly the long bed's extra weight might sag the springs up to an extra inch? I also can't go out to the shop and measure for what I want because it's been dissasembled down to the frame, for two years no less. Anyway, if you have a 2 1/2 inch drop up front and are running either 3'' or 4'' drop coils in the back of your long bed and could post a good pic of how your truck sits I would greatly appreciate it. And of course if you have any advice, lets hear it.