what seats are you guy's running?

[haysonj]

Here's mine out of a 80-90 ford Taurus or probe I bought for $50 at salvage built the center part and had everything redone in leather

[Putter]

'98 Suburban second-row seat. Full-flip bottoms (extra storage) and fold down arm rest that still hides the tank (if you have one) with arm rest down.

Also using 88-98 "Work Truck" adjustable height shoulder-belts

[rscam]

I have got a seat out of a Kodiak/Topkick crewcab. Its the back seat and its brand new. I got it off Ebay. The user name is Seanb69fsu. It was $100 buy it now and $90 shipping. You have to adapt your seat tracks. He still has a bunch of them for sale in Grey and Tan. I looked at a seat cover for mine that was $300 and rebuilding the cushion and springs I would have had $500 in a seat so I got the Kodiak seat.

[slanty12]

i actualy just pulled some buckets outa an 04 cavalier i got them for $35 a piece and they fit nice there a little bit shorter than the factory seat but only about an inch and so much more comfy tho i am still workin on what to do with the center im thinkin bout putting a couple 10" subs in the console some how and just aint figured it out yet but good luck on findin some that work well for ya

[chevydog66]

Here's mine out of an 02 Chevy Tahoe front seats. Tan leather, heated, memory. Ebay a few years ago for about $500.

[Purduegmc]

Chevydog, I like the console. What are the dimensions of it and what all did you use to build it?

[70c10]

I recently found out my seat is from a 90' F#%D truck It flips forward so I always assumed it was from a 67'. It has a thin backrest and fits great. These are a dime a dozen in junkyards

[chevydog66]

I just used some cardboard to make a template, and mock it up. Then I used some tan vinyl to match my seats with some 1/2" pad underneath, and glued and stapled it on. I can get some dimensions later, but they will be a guesstimate because of the pad and vinyl on there. I used 3/4" mdf for frame.

[72BLUZ]

[d10s69c10]

[IMG][/IMG]
these are out of a 92 de'ville... need to be re upholsterd but they are very comfortable.
fit right in with a few minor adjustments to position and caddy brackets almost sat in truck perfect minus drilling (shown) then i just put in very large square washers to hold them down without hurting sheet metal. took about 4 hours.


dont mind the corona box i was bored.

[caminokid]

I am using the bone stock seats for my trucks.

[chevelle]

2004 chevy truck for me

[Already Gone]

Originally Posted by chevelle

2004 chevy truck for me

Do you still have your gas tank in the cab? If you do I'm wondering how tall you are and how much leg room you have cause I'm 6' 3".. I have a set like yours waiting to go in my truck but thgoght I'd have more leg room with the gas tank out.

[Mt Man Chad]

Another vote for redone factory bench!
This picture is of the first bench I ever recoved last month. It was easy, just take your time!

1971 Houndstooth, Comfortable cloth inserts!

[Brock]

just a short thread jack here...Longhorn Man, I see you have some vunyl spray paint in your cup holder, How good does that work? I've got some sunvisors and arm rests that need a little sprucing up.

OK Back to the seats... I'm going with racing style seats, they recline and they are fairly thin in the back so I can fit my gut between the seat and the steering wheel?????

here is a pic of the seats...obviously not IN the truck yet

[chevelle]

Already gone- to answer your question, yes i did have these seats in with my factory gas tank and had plenty of leg room. but im only 5'9 so you might be a different story. also i dont think you could gain that much more room by taking the tank out, my seats are all the way back and the pitch of the back of the seat is just right so if i wanted to move them back the back of the seat would be tilted in more, so that may be uncomfortable for you.

[SactoJim]

60/40 out of a late 80's, early 90's (no headrests) chev truck.

[tim21391]

i have my factory bench redone in a grey cloth its got the lines going down it like it had back in the day its got real smooth cloth and its got the chevy bow tie every where on it..all them little details on it is the chevy bowtie dad redid a few years ago i dont know how much it cost...had an inch extra foam added to it

[zerwar]

Seats out of a 1997 Chevy truck....Power lumbar, fold down center console.....fits perfect for my 6'2, 240 lb. frame.