The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 02-04-2003, 04:58 PM   #1
69sixpackbee
Registered User
 
Join Date: Jan 2001
Location: Sabinal, Texas
Posts: 1,706
Anybody Get Their Truck Painted @ Earl Scheib Or Maaco or...?

...any of the other "cheapo quickie" paint shops?
How does it look? How many $$$ did it cost?
Just looking to put some shine on my truck and not too worried about an "eye appealing" paint job.
Thanx.
69sixpackbee is offline   Reply With Quote
Old 02-04-2003, 05:25 PM   #2
Wootdog
Senior Member
 
Wootdog's Avatar
 
Join Date: Jan 2001
Location: Virginia Beach, Va, USA
Posts: 1,677
re: paint

You get what you pay for. I had my 79 Z28 Camaro painted at Earl Scheib for about 800.00 base coat clear coat and it came out pretty good. It has been well over a year and it still looks good. Not bad considering it is out in the weather all the time. Wootdog
__________________
1969 Chevelle
1990 IROC Z Convertible
2002 Silverado LT
Wootdog is offline   Reply With Quote
Old 02-04-2003, 05:52 PM   #3
PloreOSU
Registered User
 
Join Date: Jan 2003
Location: Portland, OR
Posts: 42
I had my Oldsmobile done at Maaco for $500. They did a good job repairing the rust pits and the holes from the vinyl top (it cracked and water pooled inside it rusting the roof in a few spots).

They did a bad job with the badging, they broke it off and then simply glued it back on. I could see the glue marks and the badges have since fallen off. I suggest you remove all of your badging yourself first so you can keep the clips.

Finally, I did this about 3 years ago and the paint is already fading really badly. They apparently didn't get the topcoat on well. It lasted just long enough to get them out of warranty.

I'm not too upset because I could only afford that service and it fixed the major rust problems with the car. I'd spend more on a paint job that I expected to last though.
__________________
72 GMC, 2x4, LWB Fleet
DONE: 2/3 drop, 17" rims, front end rebuild, front/rear sway bars
Working on: old air AC, blazer tank, rear discs, 03 silverado seats.
PloreOSU is offline   Reply With Quote
Old 02-04-2003, 07:01 PM   #4
1970 CST Short Wide
Senior Moment
 
1970 CST Short Wide's Avatar
 
Join Date: Mar 2002
Location: Pittsburg Ca
Posts: 4,140
Maaco $900 base coat clear coat. Looks Great, just more dust particals than I would like.
__________________
1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN
2013 GMC PU, Oldest Son
71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son
2019 GMC Diesil Dually. Youngest Son
2017 Toyota SUV Daughters car
2018 Traverse , Wife’s Ride
Pittsburg Ca
94565
1970 CST Short Wide is offline   Reply With Quote
Old 02-04-2003, 07:03 PM   #5
69sixpackbee
Registered User
 
Join Date: Jan 2001
Location: Sabinal, Texas
Posts: 1,706
How much "prep" work do they do?
69sixpackbee is offline   Reply With Quote
Old 02-04-2003, 07:07 PM   #6
1970 CST Short Wide
Senior Moment
 
1970 CST Short Wide's Avatar
 
Join Date: Mar 2002
Location: Pittsburg Ca
Posts: 4,140
I did ALL my own prep such as removeing ALL the chrome, door handles Locks ect ect. It was primed and wet sanded. They pulled the bed and painted behind cab and front of bed, fender rails under hood and outer door jams to match what I painted on the inside. All in all looks REAL GOOD for a daily driver
__________________
1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN
2013 GMC PU, Oldest Son
71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son
2019 GMC Diesil Dually. Youngest Son
2017 Toyota SUV Daughters car
2018 Traverse , Wife’s Ride
Pittsburg Ca
94565
1970 CST Short Wide is offline   Reply With Quote
Old 02-04-2003, 07:18 PM   #7
meathead95
computer illiterate
 
meathead95's Avatar
 
Join Date: Jan 2001
Location: Des Moines, IA
Posts: 6,446
their is a feature on a blue bronco in the new issue of truck builder magazine that has a maaco paint job and it looks awesome
__________________
72 2wd blazer
72 swb 4x4
meathead95 is offline   Reply With Quote
Old 02-04-2003, 08:37 PM   #8
72 Super
Senior Member
 
72 Super's Avatar
 
Join Date: Jul 2001
Location: Hyattsville, Maryland
Posts: 3,690
My black 72 was painted at Maaco in 91.We did all the bodywork and remover all the trim.It was $390 then and still looks decent.
Attached Images
 
__________________
72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White
72 Super is offline   Reply With Quote
Old 02-04-2003, 09:55 PM   #9
low 84
Registered User
 
low 84's Avatar
 
Join Date: Jan 2002
Location: Houston, TX
Posts: 2,144
the quality of the job you get dosen't really depend on the name on the sign. what i mean is you could go in one macco and pay 500 and get the dirtiest crappiest paint job ever. and you could go into another and get a real decent job. the people working there and the painter have alot to do with it.

a good friend of mine managed a macco, and another friend was the painter. they turned out some really nice paint jobs. especialy if they new whos car it was they were painting. while i was trying to sell my '64 i decided to get it painted there and it needed alot of clean up work. i was getting a major hookup and paying around $700 for a ton of body work and base/clear paint. while it was in the shop one of the detailers bought it from me so i never saw it painted but after a few days they had the body straight as an arrow.

what you need to do is go look at cars that are coming out of there booths and see what kind of work the shop puts out. also talk with the painter about what your want to do and see he knows what your standards are.
__________________
'51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works

'05 1500 Crew Cab

RIP
'84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker
'80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's
low 84 is offline   Reply With Quote
Old 02-04-2003, 10:01 PM   #10
1974ChevyC10
Overworked and Underlaid
 
1974ChevyC10's Avatar
 
Join Date: May 2002
Location: Flagstaff,Arizona
Posts: 1,279
a friend of mine had his GMC he used to have painted at a Earl Scheib in Tempe,Az and in my opinion it was a terrible paint job.the bed,cab and front clip were all 3 different mixes of the same color and yes it was that obvious,there was run marks in the paint everywhere and even some overspray on things.all in all if i was in the market for a paint job i wouldnt go to an Earl Scheib based on that but i guess you have to learn for yourself as well.its hit or miss with them as with anything else
__________________
I'd rather push a Chevy than drive a Ford

The Beast-1978 C10 LWB

Red-1978 C10 LWB

(Uncle Mike)Michael Henry Millett 11/5/1957 to 03/08/2012
Gone but will never be forgotten-RIP

(Uncle Chuck)Charles Manning Gulbronsen Sr 1956-2012
Taken from us to soon but you will live on in our hearts-RIP
1974ChevyC10 is offline   Reply With Quote
Old 02-04-2003, 10:35 PM   #11
Bowed
Registered User
 
Join Date: Oct 2002
Location: where it's hot
Posts: 1,059
Had two older trucks painted at Earl Schieb in Mesa Arizona and they came out good. I got their deluxe paint job (in white ) and body work ( repair dents and sanding off pealing paint ) on both trucks . They charged between 6 and 7 hundred for each truck . Each shop is different and you can't go by just the name you have to see their work .
Bowed is offline   Reply With Quote
Old 02-04-2003, 11:05 PM   #12
casey
Registered User
 
casey's Avatar
 
Join Date: Jan 2003
Location: Kelowna B.C. Canada
Posts: 2,048
You really do get what you pay for , Like really for 500.00 paint included, your only getting a couple hours labour there, What you got to do is a little leg work, look around for a good painter, try the paint supply place, they would give you a name of a painter thats moonlighting, ask about his work, and Like some one here said check out his work. Around here a lot of times a painter will spray your truck for 100.00 to 150.00 plus the booth with is usually 100.00 plus paint which could be 300.00 for single stage or 600.00 for base clear. I've had good luck this way. Cause if your dealing directly with the painter, chances are you'll get a pretty good job. If you take it to those cheapy guys that's what you'll get
casey is offline   Reply With Quote
Old 02-05-2003, 01:48 AM   #13
69sixpackbee
Registered User
 
Join Date: Jan 2001
Location: Sabinal, Texas
Posts: 1,706
Thanx for all the super input guys!
Low84---I really like your suggestion!
I will birddog a local Maaco close to here, and maybe the Earl S. and see what theyb are spitting out. I would ask the guy who is going to repaint my Bee what he would charge but...he is high $$$..and dosent know how to short cut. It is going to cost 11.5K for my car so I would not insult him by asking to shoot my beater p'up!
69sixpackbee is offline   Reply With Quote
Old 02-05-2003, 06:42 AM   #14
72'BBGMCSGCC
Registered User
 
Join Date: Nov 2001
Location: Fletcher,N.C U.S.A
Posts: 162
Smile

I'd stay with MAACO, I use to sell spray booth filters to them when I had my own business.They do a much better job . My mom had her car painted at Earl Scheibs and the paint on the top of the car peeled off 2 years latter.
72'BBGMCSGCC is offline   Reply With Quote
Old 02-05-2003, 06:27 PM   #15
Bill72BB
Thats the Hillbilly way
 
Bill72BB's Avatar
 
Join Date: Jul 2001
Location: Torrance,Ca
Posts: 5,980
Bud;
I just got a estimate from Maaco and One -Day up here .
I didn't like the work that came out of One -day ,light colors I could see primer behind the paint.
Maaco quoted me 1495.including the body work and prep. My truck didn't need too muck body work about 20 holes to fill and two small dents one on the upper bed and another behind the rear wheel. Plenty of surface rust though.
Two tone paint including the bed and door jams.
__________________
BILL
Torrance Calif 90504
Member DUF Club
Member Old Farts Club
72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts
tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion.


" If I knew I was going to live this long I would have taken better care of myself "
Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER....

Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen ,
Bill72BB is offline   Reply With Quote
Old 02-05-2003, 08:11 PM   #16
JGARRETT
Registered User
 
JGARRETT's Avatar
 
Join Date: Jun 2000
Location: Southern California
Posts: 22
The first paint job my 70 SWB received was the one I did myself. I learned a great deal of respect for those who can put down paint. I got enough epoxy primer and paint on it to keep it from rusting for a couple of years. It looked great from 100 yards.

Maaco did the current white paint for $400. They did a good job with the paint. There was no body work and I stripped everything not to be painted.
Attached Images
 
JGARRETT is offline   Reply With Quote
Old 02-05-2003, 08:59 PM   #17
1974ChevyC10
Overworked and Underlaid
 
1974ChevyC10's Avatar
 
Join Date: May 2002
Location: Flagstaff,Arizona
Posts: 1,279
Quote:
Originally posted by Bowed
Had two older trucks painted at Earl Schieb in Mesa Arizona and they came out good. I got their deluxe paint job (in white ) and body work ( repair dents and sanding off pealing paint ) on both trucks . They charged between 6 and 7 hundred for each truck . Each shop is different and you can't go by just the name you have to see their work .
im not saying i wont go to an earl scheib period i just meant i wouldnt go to the one in Tempe my buddy got his truck painted at.
__________________
I'd rather push a Chevy than drive a Ford

The Beast-1978 C10 LWB

Red-1978 C10 LWB

(Uncle Mike)Michael Henry Millett 11/5/1957 to 03/08/2012
Gone but will never be forgotten-RIP

(Uncle Chuck)Charles Manning Gulbronsen Sr 1956-2012
Taken from us to soon but you will live on in our hearts-RIP
1974ChevyC10 is offline   Reply With Quote
Old 02-05-2003, 09:57 PM   #18
PanelDeland
I am a Referee of life.
 
PanelDeland's Avatar
 
Join Date: Jun 2000
Location: Greensboro N.C.
Posts: 13,993
I have never had one painted by either of the mentioned companies but,I saw an absolutely great macco paint job a while back.$800.00 and it was really nice."BUT" the owner of the Chevelle it was on did all of his own body work and prep.The chrome and emblems were removed and it was wet sanded and cleaned. The owner said the trick was to find the painters trigger.He boosted the gun handlers personal ride with a HEI he had on his spare parts shelf.So if you get to know the painter and find out what makes him tick........
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion.
You can't fix stupid,not even with duct tape.
"My appearance is due to the fact that "GOD" does punish you for having too much fun!"
Barrett-Jackson has perfected alchemy,they make rust into gold!
"You can lead a horse to water but you can't saddle a duck"
"Cleverly disguised as a 'Responsible Adult'
"Sometimes your Knight in shining armor is just a retard in tinfoil"
PanelDeland is offline   Reply With Quote
Old 02-06-2003, 12:10 AM   #19
Bowed
Registered User
 
Join Date: Oct 2002
Location: where it's hot
Posts: 1,059
[QUOTE]Originally posted by 1974ChevyC10


im not saying i wont go to an earl scheib period i just meant i wouldnt go to the one in Tempe my buddy got his truck painted at.
[/QUOTE

1974CHEVYC10 , I wasn't picking on any thing you said , I was just saying I went to a different shop of theirs and had some good luck with the jobs I got . Peace
Bowed is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:23 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com