trouble with wiring diagram an EZ wiring harness

[bdydrp97s10]

al right there is a wiring diagram that is sold for the 67-72 trucks... and theres one thats on this site.. its in the FAQ section... and somebody put color on it.

but im looking at the diagram where all the wires go to the connector that plugs into the gauge cluster... and my gauge cluster is completely different than what the diagram is saying. the diagram is showing wires in places but the printed circuit goes somewhere else..

anybody else have this problem? im installing an EZ wiring harness and im have ing a rally hard time figuring out what goes where..


how accurate is this diagram?? ,should i just look for a diffrent diagram. anybody have another diagram other than the one on this sight

[bdydrp97s10]

if this thread is in the wrong place feel free to move it moderators..

[myoldchevytruck]

Follow thru this post. Quite a few board members have been assisting this board member with his EZ Wiring Harness over the last couple of days. Hope this post helps.

http://67-72chevytrucks.com/vboard/s...d.php?t=296130

[bdydrp97s10]

thanks for the help so far.. abut heres another question about the wiring diagram..

on the wiper motor the wiring diagram shows 5 prongs coming off of it.. but my wiper moter only has 3 prongs on it... so has wnybody else run onto this before?? which wires should i hook up tp the wiper motor...

is it possible a po put a different wiper motor in there.. it doesnt look like anybody has tampered wihtit though

what to do now?

[VetteVet]

Originally Posted by bdydrp97s10

thanks for the help so far.. abut heres another question about the wiring diagram..

on the wiper motor the wiring diagram shows 5 prongs coming off of it.. but my wiper moter only has 3 prongs on it... so has wnybody else run onto this before?? which wires should i hook up tp the wiper motor...

is it possible a po put a different wiper motor in there.. it doesnt look like anybody has tampered wihtit though

what to do now?

Here's a diagram of the wiper motor. The other two wires are probably for the washer pump. The no. 2 terminal is hot and the rest are going to the wiper switch which completes the ground circuit for the two speeds.

[bdydrp97s10]

bump

[VetteVet]

sorry forgot the link.
http://rmcavoy.freeshell.org/electrical.html

[bdydrp97s10]

thanks alot