Door Jam Sill Plates - The 1947 - Present Chevrolet & GMC Truck Message Board Network

prg machine · 07-05-2008, 05:19 PM

I have my felt and rubber mat in that i got from Brothers and have to do door seals now.. I was wondering if someone could post a picture of how the sill plates should mount in and their relationship to the door seal and the rubber mat. My rubber mat has the tails along the side.
Thank you.

prg machine · 07-05-2008, 07:46 PM

anyone?

JimKshortstep4x4 · 07-05-2008, 08:15 PM

With the rubber mat and seal in place the step plate retains the seal and the mat. Here is a picture of the front of the step plate. The rear of the plate is a mirror image.

Jim

prg machine · 07-05-2008, 10:09 PM

Thanks a bunch Jim...................I actualy got everything in today cept one door seal and I was able to set the sillplate down and figured it out. The door seals were a real pain with contact cement all over me and everything else!!!

The truck sure quiets down with the felt and mat in. I was able to re-set the one door latch as well after the seal was in and it turned out great. Now i need to do the other side.

Thanks for the picture...................nice color on your truck by the way.

07-05-2008, 05:19 PM	#1
prg machine Registered User Join Date: Jun 2007 Location: oregon Posts: 1,069	Door Jam Sill Plates I have my felt and rubber mat in that i got from Brothers and have to do door seals now.. I was wondering if someone could post a picture of how the sill plates should mount in and their relationship to the door seal and the rubber mat. My rubber mat has the tails along the side. Thank you. __________________ 69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears:

07-05-2008, 07:46 PM	#2
prg machine Registered User Join Date: Jun 2007 Location: oregon Posts: 1,069	Re: Door Jam Sill Plates anyone? __________________ 69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears:

07-05-2008, 08:15 PM	#3
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: Door Jam Sill Plates With the rubber mat and seal in place the step plate retains the seal and the mat. Here is a picture of the front of the step plate. The rear of the plate is a mirror image. Jim Attached Images __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC

07-05-2008, 10:09 PM	#4
prg machine Registered User Join Date: Jun 2007 Location: oregon Posts: 1,069	Re: Door Jam Sill Plates Thanks a bunch Jim...................I actualy got everything in today cept one door seal and I was able to set the sillplate down and figured it out. The door seals were a real pain with contact cement all over me and everything else!!! The truck sure quiets down with the felt and mat in. I was able to re-set the one door latch as well after the seal was in and it turned out great. Now i need to do the other side. Thanks for the picture...................nice color on your truck by the way. __________________ 69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears:



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.