Where can I find 6 lug disk breaks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jacquesdean · 02-05-2003, 01:00 PM

Where can I find 6 lug front disk for 69 c 10

Earl Junior · 02-05-2003, 01:13 PM

If you're looking to convert from drum to disc I'd reccomend GMC Pauls. I used their kit and it comes very complete, good quality, good fit and finish, uses existing tie rod ends.

If you just need a new rotor, I'd check NAPA or your local mom and pop.

jacquesdean · 02-06-2003, 12:49 AM

thanks for the reply,

are the spindles from a 71 , 5 lug disc going to be the same if I purchase a 6 lug disc.

Longhorn Man · 02-06-2003, 01:08 AM

I doubt NAPA can help you at all.
Try GMC paul...he has them.

Vince M · 02-06-2003, 10:03 PM

Check out Early Classic Enterprises. They make both 5 and 6 lug discs that fit on the 71-72 spindles.

**GMCPaul** · 02-07-2003, 04:23 AM

Yes the 6 lug spindles will go on 71-87 truck spindles using all stock wheel bearings for those years. We carry stock both the 5 lug & 6 lug rotors. If you use the 73 up spindle be aware that there were 2 rotor thickness's used 1" and 1 1/4", the 6 lug rotors only work on spindles that were for 1 1/4" thick rotors.
You can find our rotors here
http://www.gmcpauls.com/Brakes&Steering.htm
GMCPaul

02-05-2003, 01:00 PM	#1
jacquesdean Registered User Join Date: Jan 2003 Location: Snead, Alabama Posts: 399	Where can I find 6 lug disk breaks Where can I find 6 lug front disk for 69 c 10

02-05-2003, 01:13 PM	#2
Earl Junior Cadillac power Join Date: Oct 2002 Location: North Idaho Posts: 296	If you're looking to convert from drum to disc I'd reccomend GMC Pauls. I used their kit and it comes very complete, good quality, good fit and finish, uses existing tie rod ends. If you just need a new rotor, I'd check NAPA or your local mom and pop. __________________ Just for the record, if I'm down to my last potato, I'm not sharing it with a guy who wants to kill me so he can get a better supply of virgins in paradise. That lesson is a little thing I call Economics 101, infidel style. --Scott Adams author of Dilbert

02-06-2003, 12:49 AM	#3
jacquesdean Registered User Join Date: Jan 2003 Location: Snead, Alabama Posts: 399	spindles thanks for the reply, are the spindles from a 71 , 5 lug disc going to be the same if I purchase a 6 lug disc.

02-06-2003, 10:03 PM	#5
Vince M Senior Member Join Date: Apr 2000 Location: Orlando, FL Posts: 1,076	Check out Early Classic Enterprises. They make both 5 and 6 lug discs that fit on the 71-72 spindles. __________________ ............................................................ 68 Chevy CST SWB w/LS1, carb & 700r4. Golden Anniversary clone with a few improvements.

02-07-2003, 04:23 AM	#6
GMCPaul Senior Member Join Date: Mar 2000 Location: Rockville,In. USA Posts: 3,718	Yes the 6 lug spindles will go on 71-87 truck spindles using all stock wheel bearings for those years. We carry stock both the 5 lug & 6 lug rotors. If you use the 73 up spindle be aware that there were 2 rotor thickness's used 1" and 1 1/4", the 6 lug rotors only work on spindles that were for 1 1/4" thick rotors. You can find our rotors here http://www.gmcpauls.com/Brakes&Steering.htm GMCPaul __________________ Secure Online Catalog for-GMCPauls Truck Parts Email- GMCPAULS@GMAIL.COM

02-06-2003, 01:08 AM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	I doubt NAPA can help you at all. Try GMC paul...he has them.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.