Sub Boxes - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bowtieboy93 · 07-08-2008, 03:13 PM

lets see all of your sub boxes for 67-72 trucks
i need ideas but not sure what works

Thanks!!

tommyd241 · 07-08-2008, 11:54 PM

Take some measurements behind your seat, find a shallow mount sub that will fit and require a minimal amount of cubic feet, and then build one out of MDF.

Sorry, I don't have an enclosure or even an audio system for an example yet. I plan on making one eventually that will have similar dimensions to the gas tank that is currently in the cab.

In the meantime you can play around with this sealed enclosure tool to get some ideas. It's pretty fun.

http://www.edesignaudio.com/boxbuilder.php?tab=sealed

d10s69c10 · 07-22-2008, 09:02 PM

well unless you use a fuel cell there is no room behind the seat (gas tank) in the 67-72 trucks. i am removing my tank and being forced to buy 10s due to the lack of "depth".

As for room under the seat i never looked to hard b4 i switched to bucket seats but if my memory serves me right the looked to be alot of room for a very shallow subwoofer.

Classic69 · 07-23-2008, 09:57 AM

Well this is the dual 10" ported Bassworx sub box I have behind my seats:

http://www.bassworx.com/tp.html

And I have a pair of these 10" subs in it:

http://www.rockfordfosgate.com/produ...n_US&p_status=

tommyd241 · 07-26-2008, 12:56 AM

^^^ Wow! That's a nice enclosure. Must sound good in such a small cab.

LUV2XCLR8 · 07-26-2008, 06:51 AM

I made enclosures for friends and customers for about 10+ years
when I was competing in USAC and IASCA. I had no kitchen table
because I was single and that's where I made my boxes. My car
model (Best I ever built) was my best achievment. It had about
17 angles, fit in the well on a 87 formula firechicken, & was 3.07
cu/ft. (At that time noone sold one over 2.5 on the market) BTW
for those who have seen these wells, it was flush with the hump
so my rear floor looked perfectly flat. No pic's of the box since it
was before digi age, but here's a pic of the famous firechicken

$12000.00 Invested, O guage Wire, 1001 up Novice, Fosgate Subs,
Fosgate Symmetry Controller, Autotek BTS amps, 3 Windsheilds, &
7 Alternators replaced in a 2 year period. (And yes I had Caps)

79gmcsierragrande · 07-26-2008, 05:42 PM

You could always put 8s in the doors with a proper box, just take some MDF and fiberglass to coat the outside from the weather.

Classic69 · 07-31-2008, 10:11 AM

Quote:

Originally Posted by tommyd241

Wow! That's a nice enclosure. Must sound good in such a small cab.

Considering I have 6 tweeters, 4 speakers, 2 subs, and 2 amps powering it all in a single cab '69 Chevy!! It sounds SWEET!!

LOL

07-08-2008, 03:13 PM	#1
bowtieboy93 Registered User Join Date: Feb 2007 Location: (Cloverdale) Surrey BC Canada Posts: 1,566	Sub Boxes lets see all of your sub boxes for 67-72 trucks i need ideas but not sure what works Thanks!! __________________ Travis travis_moffatt@hotmail.com 1969 Chevrolet C-10 LWB, 350c.i., TH350, In Pieces. 1991 GMC Sonoma, IROCS s10 grill 1963 Ford Galaxie 351/C4

07-08-2008, 11:54 PM	#2
tommyd241 Registered User Join Date: May 2008 Location: 505 Posts: 447	Re: Sub Boxes Take some measurements behind your seat, find a shallow mount sub that will fit and require a minimal amount of cubic feet, and then build one out of MDF. Sorry, I don't have an enclosure or even an audio system for an example yet. I plan on making one eventually that will have similar dimensions to the gas tank that is currently in the cab. In the meantime you can play around with this sealed enclosure tool to get some ideas. It's pretty fun. http://www.edesignaudio.com/boxbuilder.php?tab=sealed

07-22-2008, 09:02 PM	#3
d10s69c10 Built 4 Speed Join Date: May 2008 Location: Geneva FL Posts: 619	Re: Sub Boxes well unless you use a fuel cell there is no room behind the seat (gas tank) in the 67-72 trucks. i am removing my tank and being forced to buy 10s due to the lack of "depth". As for room under the seat i never looked to hard b4 i switched to bucket seats but if my memory serves me right the looked to be alot of room for a very shallow subwoofer. __________________ 1969 C/10 Short Box: 496/T-56 in worx. "To Be Old And Wise, First You Must Be Young And Stupid"

07-23-2008, 09:57 AM	#4
Classic69 Love That '69 Join Date: Oct 2007 Location: Sherwood Park, Alberta, Canada Posts: 360	Re: Sub Boxes Well this is the dual 10" ported Bassworx sub box I have behind my seats: http://www.bassworx.com/tp.html And I have a pair of these 10" subs in it: http://www.rockfordfosgate.com/produ...n_US&p_status= __________________ *I AM CANADIAN!!!!!* 1969 Chevy C/10 Truck - SBC V8, TH-350, 3.73 Posi, 1000W Rockford Fosgate Stereo System, B&M Megashifter, GT Grant Steering Wheel, Dual Magnaflow Exhaust System, Dynomax Headers, Lowered 1" Front & 3" Rear, Front/Rear Sway Bars, Racing Seats, 6000K HID Headlights 2008 Chevy Colorado LT - 3.7L I5, 4 Speed Automatic, Crew Cab, 4X4, Z71 Off-Road Package, "Ground Effects" Package, K&N Cold Air Intake, Supermod PTB, Magnaflow Exhaust w/ Resonator, 500W Kenwood / Rockford Fosgate Stereo System, Custom LED Lighting, 6000K HID Low's / High's, Blackcat Customs Gauges / Needles, Carbon Fiber Interior Accents, KrFabs 2" Lift Shackles / Torsion Bar Crank with Rancho RS5000 Shocks, Superskids Skid Plates

07-26-2008, 12:56 AM	#5
tommyd241 Registered User Join Date: May 2008 Location: 505 Posts: 447	Re: Sub Boxes ^^^ Wow! That's a nice enclosure. Must sound good in such a small cab.

07-26-2008, 06:51 AM	#6
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Sub Boxes I made enclosures for friends and customers for about 10+ years when I was competing in USAC and IASCA. I had no kitchen table because I was single and that's where I made my boxes. My car model (Best I ever built) was my best achievment. It had about 17 angles, fit in the well on a 87 formula firechicken, & was 3.07 cu/ft. (At that time noone sold one over 2.5 on the market) BTW for those who have seen these wells, it was flush with the hump so my rear floor looked perfectly flat. No pic's of the box since it was before digi age, but here's a pic of the famous firechicken $12000.00 Invested, O guage Wire, 1001 up Novice, Fosgate Subs, Fosgate Symmetry Controller, Autotek BTS amps, 3 Windsheilds, & 7 Alternators replaced in a 2 year period. (And yes I had Caps) Attached Images __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

07-26-2008, 05:42 PM	#7
79gmcsierragrande Manual Transmission Club Join Date: May 2008 Location: Grand Junction CO Posts: 292	Re: Sub Boxes You could always put 8s in the doors with a proper box, just take some MDF and fiberglass to coat the outside from the weather. __________________ 79 GMC Sierra Grande, SWB, Heavy Half If I wanted easy I would just buy a NEW truck!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.