What a surprise!

[jd4300fel]

to save a few bucks, use flat washers tacked to the low spot of the dent stand the washer on end. then take a regular dent puller and put a long 3" metal screw in place of the screw, bend the long screw into the shape of a j and use that instead. then go back with a cut off wheel cut the weld tack and grin smooth.

[jayharrell]

Originally Posted by jd4300fel

to save a few bucks, use flat washers tacked to the low spot of the dent stand the washer on end. then take a regular dent puller and put a long 3" metal screw in place of the screw, bend the long screw into the shape of a j and use that instead. then go back with a cut off wheel cut the weld tack and grin smooth.

Thats a good idea. Gotta try that. My luck the washer would pull loose and i'd hit my self in the face with the slide hammer.

[ChevLoRay]

Originally Posted by jayharrell

Thats a good idea. Gotta try that. My luck the washer would pull loose and i'd hit my self in the face with the slide hammer.

...but I betcha won't do it but once!

[jayharrell]

Originally Posted by ChevLoRay

...but I betcha won't do it but once!

yeah, i won't let it get more more then once, unlike snipe huntin.

I'm going to do it this week. Damn good idea. Will get some pics.

*trying not to hijack post*