stock BBC photo assistance needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Longhorn Man · 08-05-2008, 07:08 PM

OK, so I know I preach puttin nuts and bolts in zip lock baggies, and lots and lots of photos before you rip something apart....
What ever.
I can already hear a lot of you peckin at your keyboards to laugh at me or to poke fun.... I deserve it.
Now, I desperatly need photos of the power steering, and a/c set ups on a stock BBC... min's a 72. I already figured out the alt... that was easy. Preferably some nice up close shots... where there is no rad or sheet metal in the way maybe?

**Classic Bowties** · 08-05-2008, 07:46 PM

Here are some that I had on hand, I also have a few complete 72 402 trucks in the yard, but they all the front sheet metal is installed, I can go out and get some better close ups but they will be under hood shots. Lmk

jkade · 08-05-2008, 08:15 PM

Here are some from when I pulled my motor, hope they help.

Longhorn Man · 08-05-2008, 08:34 PM

those are awesome guys.
Anyone got more? Maybe the back side of the power steering? Bottom of the A/C? I think I have them figgured out, but pics would be great.

jkade · 08-05-2008, 08:38 PM

Quote:

Originally Posted by Longhorn Man

those are awesome guys.
Anyone got more? Maybe the back side of the power steering? Bottom of the A/C? I think I have them figgured out, but pics would be great.

Maybe these will help.

Jtrux · 08-05-2008, 08:40 PM

Dang, those brackets are huge!!!

So.Cal.Super · 08-05-2008, 08:51 PM

Here are a few more.

1 P/S from below

2 P/S behind

3 top a/c bracket to intake

4 bottom a/c

5 front of p/s

Hope it helps.

Longhorn Man · 08-05-2008, 09:02 PM

AWESOME!!!!
Thank you guys!
Now, if only it wasn't dark out.

Willys47 · 08-05-2008, 09:21 PM

that helps me out as well thanks

**Classic Bowties** · 08-05-2008, 10:01 PM

Here are a few more of the a/c pump and nine pc. bracket set.

Longhorn Man · 08-05-2008, 10:05 PM

I was pretty sure I was missing some A/C brackets... now I know.

PanelDeland · 08-06-2008, 12:03 AM

LHM I'm surprised,I figured you could do this blindfolded.Maybe you should,it might work out better.LOL!!!

lyrikz · 08-06-2008, 12:17 AM

Quote:

Originally Posted by Longhorn Man

AWESOME!!!!
Thank you guys!
Now, if only it wasn't dark out.

my setup looks NOTHING like that.. My alt is on the pass. side. ahah weird.

**Classic Bowties** · 08-06-2008, 02:54 AM

Quote:

Originally Posted by lyrikz

my setup looks NOTHING like that.. My alt is on the pass. side. ahah weird.

If your alternator is on the pass. side, then you are most likely running the long type water pump (1969 & up chev cars / 1973 & up chev-gmc trucks) with the long w.p. pulley and bracket setup.

Longhorn Man · 08-06-2008, 05:39 AM

PanelDeland, this is my first BBchev.. I can do the BB Cad or sbc no problem. This is also the first time I have taken the BB chev apart.

Longhorn Man · 08-06-2008, 09:09 PM

well, again, thanks guys!

I knew I was missing the one on the back of the A/C that goes over the valve cover, but it looks like I am missing ALL of it back there. from the spreader on the intake, to the arm over the cover, to the arm going over the exhaust manifold to that spreader on the exhaust manifold.

It's all good. I gotta buddy here that said he has that stuff for me. Either way, I got them all installed today. The carb is on now too, and a couple other little odds and ends.

**Classic Bowties** · 08-06-2008, 09:37 PM

Looks like you made some nice progress there, If you end up locating the cast bracket pn. 3872726 that bolts down over intake manifold w/2 bolts, you can then do away with that larger a.i.r./smog pump mounting bracket since it does'nt look like you are planning on running the a.i.r. pump due to using that two groove w.p. pulley.

bad6772 · 08-06-2008, 09:38 PM

Bout time slacker..................Oh and it looks good.....Keep it up and you may beat me to getting Sweet Pea done....lol

Longhorn Man · 08-06-2008, 10:26 PM

very good info there classic... I was sittin there about to slice and dice that sucker with the cut off wheel, but couldn't bring myself to doing it. Smog pump is long gone, fittings are all plugged, and I have no intentions of ever searching for the parts.
Interesting the smog pump was gone, yet the TCS system was still hooked up, and the points ignition system was still there when i got the truck.

08-05-2008, 07:08 PM	#1
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	stock BBC photo assistance needed OK, so I know I preach puttin nuts and bolts in zip lock baggies, and lots and lots of photos before you rip something apart.... What ever. I can already hear a lot of you peckin at your keyboards to laugh at me or to poke fun.... I deserve it. Now, I desperatly need photos of the power steering, and a/c set ups on a stock BBC... min's a 72. I already figured out the alt... that was easy. Preferably some nice up close shots... where there is no rad or sheet metal in the way maybe?

08-05-2008, 07:46 PM	#2
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,572	Re: stock BBC photo assistance needed Here are some that I had on hand, I also have a few complete 72 402 trucks in the yard, but they all the front sheet metal is installed, I can go out and get some better close ups but they will be under hood shots. Lmk Attached Images

08-05-2008, 08:15 PM	#3
jkade Senior Member Join Date: Nov 2005 Location: AL Posts: 2,519	Re: stock BBC photo assistance needed Here are some from when I pulled my motor, hope they help.

08-05-2008, 08:34 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: stock BBC photo assistance needed those are awesome guys. Anyone got more? Maybe the back side of the power steering? Bottom of the A/C? I think I have them figgured out, but pics would be great.

08-05-2008, 08:40 PM	#6
Jtrux I'm a poor spectator Join Date: Aug 2006 Location: San Antonio, Tx Posts: 2,287	Re: stock BBC photo assistance needed Dang, those brackets are huge!!! __________________ 2006 Jeep Unlimited IMPACT ORANGE 1993 Chevy 2500 4x4 ExCab LWB 454/NV4500 Tow rig 1977 Ford F100 2x4 LWB 1st truck I owned, still have it!!! 1979 Ford F150 4x4 SWB Built Ford Tough!!! 1971 Chevy Blazer 350 / SM465 / NP205 UNDER CONSTRUCTION Soon to have a LQ4 6.0!!!

08-05-2008, 08:51 PM	#7
So.Cal.Super It'll Buff Out! Join Date: Apr 2007 Location: San Diego Posts: 603	Re: stock BBC photo assistance needed Here are a few more. 1 P/S from below 2 P/S behind 3 top a/c bracket to intake 4 bottom a/c 5 front of p/s Hope it helps. Attached Images __________________ "Instructions are just another mans opinion" Become a Supporting Member http://67-72chevytrucks.com/vboard/payments.php Man Card Rules http://67-72chevytrucks.com/vboard/s...d.php?t=634550 72 Chevy Cheyenne Super 400 LWB

08-05-2008, 09:02 PM	#8
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: stock BBC photo assistance needed AWESOME!!!! Thank you guys! Now, if only it wasn't dark out.

08-05-2008, 09:21 PM	#9
Willys47 Registered User Join Date: Dec 2007 Location: Nanaimo B.C. Posts: 604	Re: stock BBC photo assistance needed that helps me out as well thanks __________________ I was hooked on these trucks since 1982 when I drove my budys fathers 1968 Custum GMC 396 automatic dana 60 rear with a power lock diff what a ride more fun then we will we can ever tell!!

08-05-2008, 10:01 PM	#10
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,572	Re: stock BBC photo assistance needed Here are a few more of the a/c pump and nine pc. bracket set. Attached Images

08-05-2008, 10:05 PM	#11
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: stock BBC photo assistance needed I was pretty sure I was missing some A/C brackets... now I know.

08-06-2008, 12:03 AM	#12
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: stock BBC photo assistance needed LHM I'm surprised,I figured you could do this blindfolded.Maybe you should,it might work out better.LOL!!! __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

08-06-2008, 05:39 AM	#15
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: stock BBC photo assistance needed PanelDeland, this is my first BBchev.. I can do the BB Cad or sbc no problem. This is also the first time I have taken the BB chev apart.

08-06-2008, 09:09 PM	#16
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: stock BBC photo assistance needed well, again, thanks guys! I knew I was missing the one on the back of the A/C that goes over the valve cover, but it looks like I am missing ALL of it back there. from the spreader on the intake, to the arm over the cover, to the arm going over the exhaust manifold to that spreader on the exhaust manifold. It's all good. I gotta buddy here that said he has that stuff for me. Either way, I got them all installed today. The carb is on now too, and a couple other little odds and ends.

08-06-2008, 09:37 PM	#17
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,572	Re: stock BBC photo assistance needed Looks like you made some nice progress there, If you end up locating the cast bracket pn. 3872726 that bolts down over intake manifold w/2 bolts, you can then do away with that larger a.i.r./smog pump mounting bracket since it does'nt look like you are planning on running the a.i.r. pump due to using that two groove w.p. pulley. Attached Images

08-06-2008, 09:38 PM	#18
bad6772 Official Site Guitar Shredder Join Date: May 2006 Location: Oz Posts: 3,955	Re: stock BBC photo assistance needed Bout time slacker..................Oh and it looks good.....Keep it up and you may beat me to getting Sweet Pea done....lol



Register or Log In To remove these advertisements.

08-06-2008, 10:26 PM	#19
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: stock BBC photo assistance needed very good info there classic... I was sittin there about to slice and dice that sucker with the cut off wheel, but couldn't bring myself to doing it. Smog pump is long gone, fittings are all plugged, and I have no intentions of ever searching for the parts. Interesting the smog pump was gone, yet the TCS system was still hooked up, and the points ignition system was still there when i got the truck. Last edited by Longhorn Man; 08-06-2008 at 10:26 PM.

Register or Log In To remove these advertisements.