|
08-15-2008, 01:50 PM
|
#1 |
|
Registered User
Join Date: May 2008
Location: Midland, TX
Posts: 8
|
Engine Stands
I have a question?
How much does a SBC 400 weight and what kind of engine stand do I need to rebuild im new at this so I have some dumb questions i know but im learning slowley but surley?
__________________
Everything is Bigger in Texas! 
|
|
|
|
08-15-2008, 02:03 PM
|
#2 |
|
Registered User
Join Date: Aug 2008
Location: Calgary Alberta Canada
Posts: 26
|
Re: Engine Stands
Not sure what the weight difference is between the 400 and the 350 but i just did my 350 and i bought a stand rated for 1500 pounds and it did very well it was realitivaley cheap too hope that helps!!
|
|
|
|
|
08-15-2008, 02:12 PM
|
#3 |
|
Old Skool Club
 
Join Date: Jun 2001
Location: Benton, AR "The Heart of Arkansas"
Posts: 10,880
|
Re: Engine Stands
A small block, made of cast iron, has traditionally been said to weigh approximately 700 lbs. Last time I picked up a bare block, it was hard to say (without already knowing) whether it was a 265 or a 327 (which it was). As a rule, since I'm older and smarter, I don't go around picking up (physically) any more engine blocks made of iron. Kinda hard on the sacroilliac.
I bought an A/C Delco engine stand from O'Reilly's for $90. It's a nice stand. Wheels made of steel. Just grease the axles before you assemble them so they won't squeal too soon. It has a rotator feature, for assembly purposes. Be sure to buy some grade 8 bolts that will let you attach the engine to the stand....they're not included. Welcome from the Heart of Arkansas. Last time I was in the Midland-Odessa area I was almost 24 years old. I'm older than that, now.
__________________
Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was. Last edited by ChevLoRay; 08-15-2008 at 02:14 PM. |
|
|
|
|
08-15-2008, 02:28 PM
|
#4 |
|
Registered User
Join Date: May 2008
Location: Midland, TX
Posts: 8
|
Re: Engine Stands
thx for the help guys
__________________
Everything is Bigger in Texas!
|
|
|
|
|
08-15-2008, 04:52 PM
|
#5 |
|
Doing it my damn self.....
Join Date: Jan 2008
Location: Asheville, NC
Posts: 82
|
Re: Engine Stands
I have both a small block stand and a big block stand. I always use the BB stand due to it's ease to roll around. Heavier casters and just all around user-friendly. The price difference in the two at the time was $10. So, I sparnag for the larger one. As the saying goes in tools, go as big as you can afford. Mac or Snap-on if you can, Craftsman Professional at a minimum.
|
|
|
|
|
08-16-2008, 07:58 AM
|
#6 |
|
Senior Member
Join Date: Feb 2002
Location: Tucson, AZ USA
Posts: 7,205
|
Re: Engine Stands
I heard somewhere a 400 CI SBC weighs 560# w/steel headers, iron intake, 4Bbl carb, starter, alternator, but w/o flywheel.
Personally I like to use the BBC stands. They are not that much more expensive, and go on sale at Harbor Freight pretty often. For the 292 L6 [457#] the big block stand is better since it's a top heavy, extra long engine and it needs all the stability you can get. Also I may want to build up a BBC in the near future.
__________________
Every 25 years I like to rebuild that 292, whether it needs it or not. |
|
|
|
|
08-16-2008, 08:17 AM
|
#7 |
|
Registered User
Join Date: May 2000
Location: Petrolia,Ontario,Canada but working in Port Huron,Mi.
Posts: 1,771
|
Re: Engine Stands
I transferred a sbc400,balancing on a floor jack,to the back of my minivan when I did my eng. swap.
I had to lift it up about 3" to the rear bumper and over a lip. Took everything I had to keep it off my toes. My guess...400lb range. Had everything but the carb on it.
__________________
71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE Last edited by BobbyK; 08-16-2008 at 08:17 AM. |
|
|
|
|
08-16-2008, 08:44 AM
|
#8 |
|
Registered User
Join Date: Jun 2008
Location: South Florida
Posts: 11,375
|
Re: Engine Stands
The one I have is a compact for 1500 pounds and no issues at all....
__________________
Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild |
|
|
|
|
08-16-2008, 01:09 PM
|
#9 |
|
Old Skool Club
Join Date: Jun 2001
Location: Benton, AR "The Heart of Arkansas"
Posts: 10,880
|
Re: Engine Stands
I like the wider front stance, but mine has a wider rear stance. At least (for me) I feel good that it has 4 wheels, not three.
__________________
Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was. |
|
|
|
|
08-16-2008, 06:23 PM
|
#10 |
|
Registered User
Join Date: Jun 2008
Location: Jackson, Ca.
Posts: 674
|
Re: Engine Stands
The 4 caster stands are always better to move around without fear of tipping over (jezz that'd blow).
__________________
Cable -K5 Blazer 2wd: 6.0 LQ4, 7875 Turbo, Tick Stage II Turbo Cam, Built 4L80e, RevMax Billet 3600, 9.5" 14 Bolt -Chevy 3+3 Crew Cab Dually: Cummins 12v P-Pump Swap, Compound Turbos, A2W Intercooler, NV4500HD, 4wd conversion, Radius Arms, Coilovers, Crossover Steering, etc Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=803608 |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
