|
08-18-2008, 11:43 PM
|
#1 |
|
Registered User
Join Date: Aug 2008
Location: Salina Kansas
Posts: 87
|
New member with my 72
Guys, I've been reading the site for a while and finally decided to put some pics of my 72. Got it back in 95-96, it was an old farm truck but fairly well taken care of. Put in a new interior and stereo system, rebuilt the 350 (performer cam, intake, carb, hei and hooker headers). Threw on some wheels and dual exhaust. Drove it for 3 years while finishing high school, then my 2 younger brothers drove for 3 or 4 yrs a piece. Just got it back about 6mts ago and boy she really needs some work now. Got dents in the front driver fender and rear bedside from my brothers friends hitting it with a golf cart and one backed into it with a van. Its got bit of rust under the drivers door and some light surface rust everywhere else. Well anyway here it is, I want to drop it about 3/5 but need some opinions, also new wheels, thinking bout following the herd and going with torque thrusts. How low should I go to still use it as a truck?
      Heres a pic of a buddys burb project that will obviously never get finished. He stripped it completely now its been sittin for a few years. 
|
|
|
|
08-18-2008, 11:54 PM
|
#2 |
|
Junior Member
Join Date: Dec 2006
Location: Southeast Missouri
Posts: 2,436
|
Re: New member with my 72
Welcome from Southeast Missouri.
Sure looks like it is a good starting point for whatever you want to do with it. Danny
__________________
'67 Chevy C-20 short stepper - build complete, 454/SM-465. '75 C-30 Single Cab DRW-350 small block/NP-435. '77 GMC-6500 Dump Truck, 427 Tall Deck. '92 GMC K-3500 Duallie, 454/4L80E. |
|
|
|
|
08-19-2008, 12:02 AM
|
#3 |
|
Step Brother
Join Date: Sep 2007
Location: K-town
Posts: 4,029
|
Re: New member with my 72
Nice looking truck and welcome to the board.....
|
|
|
|
|
08-19-2008, 12:05 AM
|
#4 |
|
72 Chevelle Club
Join Date: Jun 2007
Location: Newton , Iowa
Posts: 2,052
|
Re: New member with my 72
Looks Good !!
 from Newton,Iowa
__________________
I Have The Right To Remain Silent,But Lack The Ability 1972 Chevelle ... Mine 2006 Trailblazer... Hers 2002 Buick century ... Kids 2002 K1500 Z-71 EXT CAB ... Daily Driver 2005 Rockwood Roo ... For Camping 1974 Harley-Davidson XLH Sportster 84'' stroker |
|
|
|
|
08-19-2008, 01:52 AM
|
#5 |
|
Gone to greener pastures
 Join Date: May 2007
Location: Gateway to the Delta
Posts: 7,354
|
Re: New member with my 72
Welcome from the Left Coast.
That looks like a better start then many of us have.
__________________
'69 Chevy 1/2 T LWB Stepper: Daily Beater '72 GMC 3/4 T Fleet: Another Daily Beater '72 Plymouth Gran Coupe: ? "Ah women. They make the highs higher and the lows more frequent." Friedrich Nietzsche "Never kick a fresh turd on a hot day." Harry S. Truman GUN CONTROL: Never having to say, "I missed you." Always fire two warning shots into your attacker's chest area before putting a bullet between his eyes. Paraphrased from Louis Awerbuck |
|
|
|
|
08-19-2008, 05:18 AM
|
#6 |
|
State of Confusion!
 
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,820
|
Re: New member with my 72
Welcome from the southern end of Mississippi.
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
|
|
|
|
08-19-2008, 05:57 AM
|
#7 |
|
"THE GREEN GOBLIN"
Join Date: Mar 2008
Location: Fremont Ca.
Posts: 1,025
|
Re: New member with my 72
Welcome from Fremont Cali.
__________________
 Petey-pablo"THE GREEN GOBLIN" 1972 Cheyenne 10 Short Fleet Side Front 2.5inch Spindles with 2inch Springs Rear 4inch drop Springs. 454BBC TH400,Posi 1971 Cheyenne 10 Long Fleet Side 454BBC TH350,Posi  SoldDrive it like you stole it!  Petey-pablo@sbcglobal.net |
|
|
|
|
08-19-2008, 08:10 AM
|
#8 |
|
Resident of Here
Join Date: May 2008
Location: Wesley Chapel, FL, USA
Posts: 7,716
|
Re: New member with my 72
Welcome from NC! Nice LWB! I would drop it 3/5 because it is a LWB, any lower and it wont be drivable. You could bag it, it would only cost about 1500$ with a small bolt in c notch, and you can inflate and it will be drivable, deflate and it would be showable. Just my .02
Also I think you should get some 18x8F 20x10R Wheel Vintiques. Another of my .02
__________________
~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck 
Last edited by thirdstreettito; 08-19-2008 at 08:10 AM. |
|
|
|
|
08-19-2008, 12:06 PM
|
#9 |
|
Registered User
Join Date: Oct 2007
Location: Sykesville MD
Posts: 357
|
Re: New member with my 72
nice truck, i seem to have seen a truck similar to that one somewhere before, cant put my finger on it though, here is mine:
__________________
'55 3100 2nd series short-bed stepside '70 Corvette coupe stingray '71 Chevelle 2-dr coupe SS clone '71 C10 long-bed fleetside '83 long-haired brunette wife |
|
|
|
|
08-19-2008, 12:12 PM
|
#10 |
|
Registered User
Join Date: Oct 2007
Location: Sykesville MD
Posts: 357
|
Re: New member with my 72
umm, it depends what kind of stuff you will be using it for, if you will be hauling a truck load of gravel or firewood on ocassion, i wouldnt lower it too much or not at all, maybe 2/4 drop, but you are using it for light duty stuff, i would say you could lower it more, maybe 4/6 ?, now i have not lowered these trucks so i am not too sure about ride quality and such, hopefully some guys who have lowered their trucks will chime in.
__________________
'55 3100 2nd series short-bed stepside '70 Corvette coupe stingray '71 Chevelle 2-dr coupe SS clone '71 C10 long-bed fleetside '83 long-haired brunette wife |
|
|
|
|
08-19-2008, 12:17 PM
|
#11 |
|
Registered User
Join Date: Feb 2007
Location: Mt. Sterling, Ky.
Posts: 205
|
Re: New member with my 72
Welcome from the Bluegrass state.
The more you visit the board the more ideas you get for mods........the list is endless. Good luck with your build. Eric |
|
|
|
|
08-19-2008, 12:21 PM
|
#12 |
|
Senior Member
Join Date: Aug 2008
Location: Cedar Park, Texas
Posts: 7,494
|
Re: New member with my 72
Nice 72. Don't go too low or you will regret it. I don't think I have ever seen a '67 Burb... A few of 69-72's... Make your buddy an offer on the 'Burb ('67?) and get some paint on it and get it out of the weather while it is still salvageable!!!
|
|
|
|
|
08-19-2008, 02:23 PM
|
#13 |
|
Registered User
Join Date: Aug 2008
Location: Salina Kansas
Posts: 87
|
Re: New member with my 72
That sure does look like my truck, in better shape than mine tho. I've been thinking about rhino lining the bed, do they go right over the top of whats there or sand it down first?
I don't haul much other than my boys PW50 and miscellaneous junk every once in a while. Thinking I may just want to get 2 inch drop spindles and new springs and 3 or 4 inch drop springs for the back. I want to make sure that the back isn't lower than the front with an empty bed. I'm sure I could pick up the suburban cheap, problem is that he stripped damn near everything and I'm not sure where the parts are. Would have to buy nearly every part on it to get it going again. I would love to have an old suburban with modern running gear in it tho. |
|
|
|
|
08-19-2008, 06:21 PM
|
#14 |
|
Tot Roddin'
Join Date: Apr 2005
Location: Mid-MO
Posts: 24,461
|
Re: New member with my 72
to the board from Mid-MO!!!You'll find this place to become your second home. There's tons of information, friends, parts, .... and so much more. Just to bring this to your attention.... Midwest All Truck Nat's in Riverside, MO (North Kansas City) Check out the following threads for more info: Final Count - Midwest All Truck Nats - Sept 5-7 Riverside, MO Who's goin to the Midwest All Trucks Nats? Hope to see you there!
__________________
-Nate  1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) |
|
|
|
|
08-19-2008, 07:28 PM
|
#15 |
|
Registered User
Join Date: Jan 2008
Location: Atlanta,Ga
Posts: 660
|
Re: New member with my 72
WELCOME to the board soilder!!
Just as 72BlckButy said it'll become your second home!!! HAPPY MOTORING!!!
__________________
www.gkautospa.com Like A Rock! http://67-72chevytrucks.com/vboard/s...d.php?t=397153 Last edited by GKsport67; 08-19-2008 at 07:29 PM. |
|
|
|
|
08-19-2008, 07:35 PM
|
#16 |
|
Step Brother
Join Date: Sep 2007
Location: knoxville TN
Posts: 1,950
|
Re: New member with my 72
FROM KNOXVILLE TN!!!
__________________
Joe
|
|
|
|
|
08-19-2008, 07:55 PM
|
#17 |
|
Registered User
Join Date: Mar 2003
Location: Uvalde, Tx
Posts: 407
|
Re: New member with my 72
Welcome from Texas
__________________
1969 C/10 Longbed undergoing rebuild. Old Chevy's Never Die, They Just Rust Around The Edges |
|
|
|
|
08-19-2008, 08:16 PM
|
#18 |
|
Still Just Havin Some Fun!
Join Date: Jun 2007
Location: Piedmont, Oklahoma
Posts: 1,145
|
Re: New member with my 72
Welcome to the board!
__________________
a green one with some stuff done to it.... |
|
|
|
|
08-19-2008, 09:01 PM
|
#19 |
|
Registered User
Join Date: Aug 2008
Location: Lethbridge,Alberta
Posts: 532
|
Re: New member with my 72
Nice Truck,twin to mine. Lowered and Torque Thrust the direction I'm going too.
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
