|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
08-24-2008, 04:39 PM
|
#1 |
|
Registered User
 
Join Date: Aug 2008
Location: Clayton, NC
Posts: 55
|
87 turn stalk replacement
Hey guys, I don't post much but I do lurk quite a bit. I've got my steering column apart to replace the turn stalk but can't figure out how to get it out of the switch. There is a retainer in the switch but no matter which way I turn it the retainer will not come out. I have to suspect that you have to remove this plastic retainer to allow the stalk to come out. Thanks..
Dave |
|
|
|
08-24-2008, 07:48 PM
|
#2 |
|
Registered User
Join Date: Aug 2008
Location: Clayton, NC
Posts: 55
|
Re: 87 turn stalk replacement
Okay it looks like that I just needed a bigger hammer.. I pulled on the stalk and the stalk came apart. All that was left in the switch itself was the metal rod the stalk is mounted on. With a pair of vise grips I just twisted and pulled. Bravo then I just pressed the new on in. Just in case some one has the problem in the future I thought I would post the resolution. Thanks
Dave |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
