|
08-10-2008, 03:41 PM
|
#76 |
|
Registered User
Join Date: Jun 2007
Location: oregon
Posts: 1,069
|
Re: deer gets another one
justcuz, thanks for the info....................I will definitely look into this and set the truck up with it. The only thing own to drive are trucks and I am usualy very good at being cautious since i know their light rear end characteristics...................this accident was actualy my first highway accident and has made a believer out of me. I pick up the shoulder belts next friday and they are on the topof the list for things to do right away!
__________________
69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears: 
|
|
|
|
08-17-2008, 09:02 PM
|
#77 |
|
Registered User
Join Date: Jun 2007
Location: oregon
Posts: 1,069
|
Re: deer gets another one
well I dropped 200 on a stud gun and a shrinking tip and 500 studs and got going on the truck..............fender turned out okay did pull a few holes however.
If the cab goes this well I will have payed for the Uni-spotter.
__________________
69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears:
|
|
|
|
|
08-25-2008, 04:30 PM
|
#78 |
|
Registered User
Join Date: Jun 2007
Location: oregon
Posts: 1,069
|
Re: deer gets another one
progress
__________________
69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears:
|
|
|
|
|
08-25-2008, 04:39 PM
|
#79 |
|
Hittin E-Z Street on Mud Tires
 
Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Re: deer gets another one
Pics in post #78 are too small
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride  American Born, Country by the Grace of God  1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 08-25-2008 at 04:59 PM. |
|
|
|
|
08-25-2008, 05:02 PM
|
#80 |
|
PROJECT 7DEUCE
Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,594
|
Re: deer gets another one
Looks like a porcupine attacked your ride..
__________________
GO BIG GREEN GO DUCKSMEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. |
|
|
|
|
08-25-2008, 05:09 PM
|
#81 | |
|
Hittin E-Z Street on Mud Tires
Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Re: deer gets another one
Quote:
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! |
|
|
|
|
|
08-26-2008, 09:19 PM
|
#82 |
|
Registered User
Join Date: Jun 2007
Location: oregon
Posts: 1,069
|
Re: deer gets another one
Darn right sexy!
I will have more coming up this weekend as I have 4 days off and plan on major progress I found out today that insurance companys can decide to total your vehicles if you have a collision coverage package and the frame is tweaked in any way. So since in my case I was on Liability coverage only, I get to bring the truck back to life..otherwise it would have been decided totaled....................................I am never realy used to crashes but I have gone through some of this stuff back in the day of 4x4s and competition and some banging around and twisting of the Jeeps...............never made much since to have comprehensive insurance on something you plan on thrashing out in the woods. This truck was nevwer planned for that and I had anticipated getting a "value" coverage for it if and when I got it cosmeticaly finished.................but now it is coming back as jusa good old truck that I will still use carefuly but not worry too much if I get a ding or two. A co-worker just crashed his Harley last Thursday.....going home from work.rounded a corner about 50 and a deer stepped out in front of him. He is realy lucky that all he has is some nasty road rash.
__________________
69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears:
|
|
|
|
|
08-26-2008, 09:21 PM
|
#83 |
|
Registered User
Join Date: Jun 2007
Location: oregon
Posts: 1,069
|
Re: deer gets another one
Kinda ironic.................but when I returned to work after the wreck , I had told the bike dude that I probably wouldn't daily drive my Chevy after I got it put back together and he said that we can't live in fear and that he rode his bike every chance.
__________________
69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears:
|
|
|
|
|
08-29-2008, 09:57 PM
|
#84 |
|
Registered User
Join Date: Jun 2007
Location: oregon
Posts: 1,069
|
Re: deer gets another one
here's today
__________________
69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears:
|
|
|
|
|
08-30-2008, 01:46 AM
|
#85 |
|
Registered User
Join Date: May 2007
Location: Buffalo MN
Posts: 606
|
Re: deer gets another one
its deffinately coming back to life nicely
__________________
Trial and Error, its expensive but its a mistake i most likely wont make again 1971 chevy k10 custom deluxe http://67-72chevytrucks.com/vboard/s...d.php?t=341257 1968 chevy k/10 fleet http://67-72chevytrucks.com/vboard/s...d.php?t=334731 1948 desoto custom coupe fluid drive(family heirloom) |
|
|
|
|
08-30-2008, 03:26 AM
|
#86 |
|
Commander Taco Bello
Join Date: Sep 2006
Location: Des Moines, Iowa
Posts: 2,232
|
Re: deer gets another one
it's amazing that you're even attempting this repair. Not something i would do, but it's awesome that you are. can't wait to see it back on the road when you're done.
|
|
|
|
|
08-30-2008, 11:48 AM
|
#87 | |
|
Registered User
Join Date: Jun 2007
Location: oregon
Posts: 1,069
|
Re: deer gets another one
Quote:
more time than money! Actualy I had put too much of myself into the truck in the last 4 years to just scrap it. I als started looking around at what was available to start over and i just don't want to go there again. I will patch this back and keep it as a truck to use pretty much as a truck. If I ever get my life settled down again I might part my stuff into a short box truck. Truthfully I am not so sure if I am ready to get back into any more long term projects. ie: I spent almost all of my spare time for the last 4 years on this truck and then it was all over in a split second. If I sound discouraged......................well yea I guess.
__________________
69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears:
Last edited by prg machine; 08-30-2008 at 11:49 AM. Reason: wrong sentence |
|
|
|
|
|
08-31-2008, 09:33 PM
|
#88 |
|
Registered User
Join Date: Jun 2007
Location: oregon
Posts: 1,069
|
Re: deer gets another one
the corner is good as it'll ever get for this beast.
I plan on using this truck as a truck..........keep it in primer and someday utilize my driveline............still barely any miles on the engine, trans/transfer rebuild, new gears in front diff and a good tight eaton rear end.... new exhaust also and brakes. Any way maybe find the ultimate short wide 4x4 that need s all of the above and just retire the K-20 frame and body..............
__________________
69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears:
|
|
|
|
|
08-31-2008, 09:37 PM
|
#89 |
|
Registered User
Join Date: Jun 2007
Location: oregon
Posts: 1,069
|
Re: deer gets another one
heck, for that matter, I have over a grand invested in just glass and exhaust..................not to mention all of the inside cab goodies like seals, regulators, mat, replacement OEM style speaker, a Sun tach that is a real Sun tach from the late 50s early 60s upgraded to modern ignition capabilitys (that was almost 500 to do)
What can I say...............the truck is me!
__________________
69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears:
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
