67-68 Chevy Grill - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hgs_notes · 09-02-2008, 10:48 AM

I tried to sell it before without shipping, and no one local was interested, so here it is again, and I'll ship it. Comes with everything, bezels, hood latch, rock guard, blinkers, all of it. There is surface rust only. There are no dents that I can see or feel anywhere. I would consider separating the hood latch, rock guard and bezels, but will not reduce the price of the overall package for the grill, it will just save you shipping costs. The price is $150 plus the shipping.

Shipping will likely be through DHL, I've used them before for large packages and they have the best price and service for that. The full package will probably cost about $75 for shipping to most areas, but this is not a quote. I'll try to have as accurate an estimate as possible based on the actual shipping weight and zip code.

Pics:

mahanian · 09-02-2008, 12:39 PM

Just some friendly advice that might help you sell it. If you wrap it in cardboard then shipping should only run you around $30-$35. I bought one from a member in Texas and it cost $29 to ship to AZ via UPS. The dimensions are just under the "oversized" requirement. Mine arrived undamaged too. Hope that helps you sell it!

hgs_notes · 09-02-2008, 03:18 PM

There's a big difference in TX to AZ, than MN to AZ in the shipping costs, but I get your point. I've shipped large items before, including a complete swb bed side, just as you've described. I'm not saying it will cost $75, but it may be that high depending on where they are in relation to MN. That's not a number I pulled from my rear, It's based on the weight and dimensions to the outer corners of the US and using estimates from the USPS, UPS and DHL. BTW, the bed side cost about $110 to ship to CA last year.

mahanian · 09-02-2008, 04:51 PM

If the box was 1 inch longer in one direction it would have cost $70 to ship from TX to AZ. The cost doesn't change much to go a couple states over or across the US. Sorry, was just offering friendly advice...

Bump for ya

hgs_notes · 09-02-2008, 10:13 PM

Quote:

Originally Posted by mahanian

If the box was 1 inch longer in one direction it would have cost $70 to ship from TX to AZ. The cost doesn't change much to go a couple states over or across the US. Sorry, was just offering friendly advice...

Bump for ya

No need to apologize, I wasn't bothered. I came across the 1 inch difference thing last year when I shipped some blazer buckets. Almost doubled the cost. I cut down the box and retaped it, problem solved.

hgs_notes · 09-03-2008, 05:07 PM

bump

andrewt2 · 09-03-2008, 11:17 PM

how much shipped to me in Carbondale,KS 66414. been looking for one without any dents for a while now. thanks.

hgs_notes · 09-04-2008, 09:36 AM

Quote:

Originally Posted by andrewt2

how much shipped to me in Carbondale,KS 66414. been looking for one without any dents for a while now. thanks.

Shipping to you should be no more than $50.

hgs_notes · 09-05-2008, 10:01 AM

No response from andrewt2 yet, so is anyone else interested? Any reasonable offers? I've seen grills with dents sell for around 75 - 100 on here and they did not include any of the extra pieces offered here.

andrewt2 · 09-05-2008, 01:53 PM

i better pass. sorry to just now be getting back to you. dont have the funds for it right now. thanks.

hgs_notes · 09-06-2008, 01:10 PM

bump

lo72 · 09-07-2008, 11:14 AM

How much to 30122 outside of Atlanta? Any ideas on what else will be needed to put on a 71?

hgs_notes · 09-07-2008, 05:35 PM

Quote:

Originally Posted by lo72

How much to 30122 outside of Atlanta? Any ideas on what else will be needed to put on a 71?

Shipping would be about $50. You would also need fenders for sure. I'm not sure if the radiator support needs to be swapped, but I'm sure someone else here can answer that.

texastrendz · 09-07-2008, 06:15 PM

can you get me a shipping cost to 77092 in houston. see what numbers we can come up with

hgs_notes · 09-07-2008, 07:36 PM

Quote:

Originally Posted by texastrendz

can you get me a shipping cost to 77092 in houston. see what numbers we can come up with

I actually comes to about the same as Atlanta at about $50.

texastrendz · 09-07-2008, 07:51 PM

well i am looking at one here in houston for 150.00. that is without shipping, it was sold this morning at a local swap meet. i can offer you 100.00 sorry but that is all i have in the budget for now. and ill pay the shipping

hgs_notes · 09-07-2008, 10:40 PM

Quote:

Originally Posted by texastrendz

well i am looking at one here in houston for 150.00. that is without shipping, it was sold this morning at a local swap meet. i can offer you 100.00 sorry but that is all i have in the budget for now. and ill pay the shipping

A 1/3 off discount is too steep for me.

Good luck looking for another or contact me if you change your mind.

lo72 · 09-08-2008, 12:56 PM

So 150.00 plus 50.00 to atlanta ?

lo72 · 09-08-2008, 12:57 PM

could you send some pics?

jb4short · 09-08-2008, 03:32 PM

if you decide to split it up I'm interested in the steel trim

hgs_notes · 09-08-2008, 06:42 PM

Quote:

Originally Posted by lo72

So 150.00 plus 50.00 to atlanta ?

Yes, that's correct.

Quote:

Originally Posted by lo72

could you send some pics?

Pictures of what specifically?

hgs_notes · 09-09-2008, 09:05 AM

bump

bryanschevyparts · 09-09-2008, 10:16 AM

ttt for a good guy to deal with !!

09-02-2008, 10:48 AM	#1
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	67-68 Chevy Grill I tried to sell it before without shipping, and no one local was interested, so here it is again, and I'll ship it. Comes with everything, bezels, hood latch, rock guard, blinkers, all of it. There is surface rust only. There are no dents that I can see or feel anywhere. I would consider separating the hood latch, rock guard and bezels, but will not reduce the price of the overall package for the grill, it will just save you shipping costs. The price is $150 plus the shipping. Shipping will likely be through DHL, I've used them before for large packages and they have the best price and service for that. The full package will probably cost about $75 for shipping to most areas, but this is not a quote. I'll try to have as accurate an estimate as possible based on the actual shipping weight and zip code. Pics: __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

09-02-2008, 12:39 PM	#2
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: 67-68 Chevy Grill Just some friendly advice that might help you sell it. If you wrap it in cardboard then shipping should only run you around $30-$35. I bought one from a member in Texas and it cost $29 to ship to AZ via UPS. The dimensions are just under the "oversized" requirement. Mine arrived undamaged too. Hope that helps you sell it!

09-02-2008, 03:18 PM	#3
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	Re: 67-68 Chevy Grill There's a big difference in TX to AZ, than MN to AZ in the shipping costs, but I get your point. I've shipped large items before, including a complete swb bed side, just as you've described. I'm not saying it will cost $75, but it may be that high depending on where they are in relation to MN. That's not a number I pulled from my rear, It's based on the weight and dimensions to the outer corners of the US and using estimates from the USPS, UPS and DHL. BTW, the bed side cost about $110 to ship to CA last year. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

09-02-2008, 04:51 PM	#4
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: 67-68 Chevy Grill If the box was 1 inch longer in one direction it would have cost $70 to ship from TX to AZ. The cost doesn't change much to go a couple states over or across the US. Sorry, was just offering friendly advice... Bump for ya Last edited by mahanian; 09-02-2008 at 04:57 PM.

09-03-2008, 05:07 PM	#6
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	Re: 67-68 Chevy Grill bump __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

09-03-2008, 11:17 PM	#7
andrewt2 Registered User Join Date: Oct 2007 Location: Carbondale, Kansas Posts: 547	Re: 67-68 Chevy Grill how much shipped to me in Carbondale,KS 66414. been looking for one without any dents for a while now. thanks.

09-05-2008, 10:01 AM	#9
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	Re: 67-68 Chevy Grill No response from andrewt2 yet, so is anyone else interested? Any reasonable offers? I've seen grills with dents sell for around 75 - 100 on here and they did not include any of the extra pieces offered here. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

09-05-2008, 01:53 PM	#10
andrewt2 Registered User Join Date: Oct 2007 Location: Carbondale, Kansas Posts: 547	Re: 67-68 Chevy Grill i better pass. sorry to just now be getting back to you. dont have the funds for it right now. thanks.

09-06-2008, 01:10 PM	#11
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	Re: 67-68 Chevy Grill bump __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

09-07-2008, 11:14 AM	#12
lo72 Truck Junkie Join Date: Aug 2008 Location: Lithia Springs Ga Posts: 354	Re: 67-68 Chevy Grill How much to 30122 outside of Atlanta? Any ideas on what else will be needed to put on a 71?

09-07-2008, 06:15 PM	#14
texastrendz Registered User Join Date: Jan 2008 Location: HOUSTON TX Posts: 1,161	Re: 67-68 Chevy Grill can you get me a shipping cost to 77092 in houston. see what numbers we can come up with

09-07-2008, 07:51 PM	#16
texastrendz Registered User Join Date: Jan 2008 Location: HOUSTON TX Posts: 1,161	Re: 67-68 Chevy Grill well i am looking at one here in houston for 150.00. that is without shipping, it was sold this morning at a local swap meet. i can offer you 100.00 sorry but that is all i have in the budget for now. and ill pay the shipping

09-08-2008, 12:56 PM	#18
lo72 Truck Junkie Join Date: Aug 2008 Location: Lithia Springs Ga Posts: 354	Re: 67-68 Chevy Grill So 150.00 plus 50.00 to atlanta ?

09-08-2008, 12:57 PM	#19
lo72 Truck Junkie Join Date: Aug 2008 Location: Lithia Springs Ga Posts: 354	Re: 67-68 Chevy Grill could you send some pics?

09-08-2008, 03:32 PM	#20
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: 67-68 Chevy Grill if you decide to split it up I'm interested in the steel trim



Register or Log In To remove these advertisements.

09-09-2008, 09:05 AM	#22
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	Re: 67-68 Chevy Grill bump __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

09-09-2008, 10:16 AM	#23
bryanschevyparts Registered User Join Date: Mar 2008 Location: elk river,mn Posts: 509	Re: 67-68 Chevy Grill ttt for a good guy to deal with !!

Register or Log In To remove these advertisements.