F/S Blazer bucket seat tracks !! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bryanschevyparts · 09-07-2008, 12:49 PM

i have a good pair seat tracks 75.00 shipped Complete! also a blazer fuel neck 43.00shipped

Down south truckin · 09-07-2008, 01:12 PM

Bryan, are the seat tracks off a 69-72 blazer seat and are they driver side if so I'll take them. thanks Mike

bryanschevyparts · 09-07-2008, 01:54 PM

Mike,yes they are from a 72 ,and its for both sides pass/driver.

wugunguy · 09-07-2008, 02:20 PM

I'd be interested if down south passes.

bryanschevyparts · 09-07-2008, 02:55 PM

sounds good if mike passes,your next .

Down south truckin · 09-07-2008, 08:55 PM

Bryan send me your paypal address thanks Mike

bryanschevyparts · 09-08-2008, 01:19 AM

Mike,Thank you for a smooth deal!!

robs71k5 · 09-09-2008, 11:02 AM

Can any one answer this question : Seats on my 71 blazer mount holes distance from front holes to rear holes doesnt match floor .The rear holes will end up where there is no "factory" spot welded backing plates:mm in the floor at the location of the rear mounts. Is this common to these trucks or did my truck come with bench seat ?

teamradrz1 · 09-09-2008, 11:27 AM

Quote:

Originally Posted by robs71k5

Can any one answer this question : Seats on my 71 blazer mount holes distance from front holes to rear holes doesnt match floor .The rear holes will end up where there is no "factory" spot welded backing plates:mm in the floor at the location of the rear mounts. Is this common to these trucks or did my truck come with bench seat ?

are you sure you have the correct year factory seats for it? As far as I know Blazers did not come with a bench seat there would be no way to get to the back seat.

bryanschevyparts · 09-09-2008, 05:55 PM

i am also pretty shure blazers did not come with a bench ,i do have a pair of seats i will sell CHEAP .If you need

72junky · 09-09-2008, 06:02 PM

Bryan,

Do you have another bucket seat track? I need a driver's side real bad.

thanks,
72junky

bryanschevyparts · 09-09-2008, 06:05 PM

i am sorry ,i only have bench tracks

72junky · 09-09-2008, 06:13 PM

Thanks,
If you come across any, keep me in mind.

72junky

Down south truckin · 09-09-2008, 06:35 PM

Sounds like you either have utility buckets and your truck came with sport buckets or vice versa

Quote:

Originally Posted by robs71k5

Can any one answer this question : Seats on my 71 blazer mount holes distance from front holes to rear holes doesnt match floor .The rear holes will end up where there is no "factory" spot welded backing plates:mm in the floor at the location of the rear mounts. Is this common to these trucks or did my truck come with bench seat ?

**special-K** · 09-10-2008, 05:48 AM

Don`t all the K/5 seats bolt in the same?Aren`t the brackets the same on utilities as on sports?
72junky,I have the driver`s brackets.I just removed the seats and the driver`s seat is toast.So,I`d sell the bracket alone.

Down south truckin · 09-10-2008, 10:58 PM

Tim, I have a odd seat I would be interested in the pass seat if it's good and the driver side slide if junky passes. Thanks Mike

Quote:

Originally Posted by special-K

Don`t all the K/5 seats bolt in the same?Aren`t the brackets the same on utilities as on sports?
72junky,I have the driver`s brackets.I just removed the seats and the driver`s seat is toast.So,I`d sell the bracket alone.

bouncytruck · 09-11-2008, 12:00 AM

I thought that the driver's tracks were the same as bench tracks. Can't you just take the far right bench track and move it to the right side of the driver's bucket? Never tried it, just assumed that was the case.

**CPNE** · 09-11-2008, 10:24 AM

Quote:

Originally Posted by bouncytruck

I thought that the driver's tracks were the same as bench tracks. Can't you just take the far right bench track and move it to the right side of the driver's bucket? Never tried it, just assumed that was the case.

Nope, not the same, they mount differently to the seat frame.

**Classic Bowties** · 09-11-2008, 11:48 AM

Quote:

Originally Posted by special-K

Don`t all the K/5 seats bolt in the same?Aren`t the brackets the same on utilities as on sports?

The drivers side adj./slider tracks and pass. side pivoting mounting brackets are different between sport and utitlity buckets, the main difference is how they mount to the seat bottom.

**6t727t2** · 09-11-2008, 12:01 PM

Ok, while we are on/or off the subject, are sport blazer driver seat brackets the same as truck driver bucket seat brackets?

**CPNE** · 09-11-2008, 12:12 PM

Quote:

Originally Posted by 6t727t2

Ok, while we are on/or off the subject, are sport blazer driver seat brackets the same as truck driver bucket seat brackets?

yes, and I need a set. Have 73-up truck bucket brackets to offer in trade

**Classic Bowties** · 09-11-2008, 12:14 PM

Quote:

Originally Posted by 6t727t2

Ok, while we are on/or off the subject, are sport blazer driver seat brackets the same as truck driver bucket seat brackets?

Yes, drivers side is the same as long as the blazer seats tracks are off sport buckets.

09-07-2008, 12:49 PM	#1
bryanschevyparts Registered User Join Date: Mar 2008 Location: elk river,mn Posts: 509	F/S Blazer bucket seat tracks !! i have a good pair seat tracks 75.00 shipped Complete! also a blazer fuel neck 43.00shipped

09-07-2008, 01:12 PM	#2
Down south truckin Senior Member Join Date: Feb 2006 Location: Lilburn Georgia Posts: 1,240	Re: F/S Blazer bucket seat tracks !! Bryan, are the seat tracks off a 69-72 blazer seat and are they driver side if so I'll take them. thanks Mike

09-07-2008, 01:54 PM	#3
bryanschevyparts Registered User Join Date: Mar 2008 Location: elk river,mn Posts: 509	Re: F/S Blazer bucket seat tracks !! Mike,yes they are from a 72 ,and its for both sides pass/driver.

09-07-2008, 02:20 PM	#4
wugunguy 70 C/10-Work in progress Join Date: Aug 2005 Location: Kansas Posts: 601	Re: F/S Blazer bucket seat tracks !! I'd be interested if down south passes. __________________ In the garage 1999 Dodge Dakota Sport-Daily Driver 1972 Chevy K/5 CST AC/PS/PB/4x4/Tow Hooks/Tilt 1970 Chevy C/10-Current project

09-07-2008, 02:55 PM	#5
bryanschevyparts Registered User Join Date: Mar 2008 Location: elk river,mn Posts: 509	Re: F/S Blazer bucket seat tracks !! sounds good if mike passes,your next .

09-07-2008, 08:55 PM	#6
Down south truckin Senior Member Join Date: Feb 2006 Location: Lilburn Georgia Posts: 1,240	Re: F/S Blazer bucket seat tracks !! Bryan send me your paypal address thanks Mike

09-08-2008, 01:19 AM	#7
bryanschevyparts Registered User Join Date: Mar 2008 Location: elk river,mn Posts: 509	Re: F/S Blazer bucket seat tracks !! Mike,Thank you for a smooth deal!!

09-09-2008, 11:02 AM	#8
robs71k5 K5drive Join Date: Nov 2004 Location: burnaby BC Canada Posts: 809	Re: F/S Blazer bucket seat tracks !! Can any one answer this question : Seats on my 71 blazer mount holes distance from front holes to rear holes doesnt match floor .The rear holes will end up where there is no "factory" spot welded backing plates:mm in the floor at the location of the rear mounts. Is this common to these trucks or did my truck come with bench seat ?

09-09-2008, 05:55 PM	#10
bryanschevyparts Registered User Join Date: Mar 2008 Location: elk river,mn Posts: 509	Re: F/S Blazer bucket seat tracks !! i am also pretty shure blazers did not come with a bench ,i do have a pair of seats i will sell CHEAP .If you need

09-09-2008, 06:02 PM	#11
72junky Registered User Join Date: Jun 2008 Location: Greenville, South Carolina Posts: 150	Re: F/S Blazer bucket seat tracks !! Bryan, Do you have another bucket seat track? I need a driver's side real bad. thanks, 72junky

09-09-2008, 06:05 PM	#12
bryanschevyparts Registered User Join Date: Mar 2008 Location: elk river,mn Posts: 509	Re: F/S Blazer bucket seat tracks !! i am sorry ,i only have bench tracks

09-09-2008, 06:13 PM	#13
72junky Registered User Join Date: Jun 2008 Location: Greenville, South Carolina Posts: 150	Re: F/S Blazer bucket seat tracks !! Thanks, If you come across any, keep me in mind. 72junky

09-10-2008, 05:48 AM	#15
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: F/S Blazer bucket seat tracks !! Don`t all the K/5 seats bolt in the same?Aren`t the brackets the same on utilities as on sports? 72junky,I have the driver`s brackets.I just removed the seats and the driver`s seat is toast.So,I`d sell the bracket alone. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-11-2008, 12:00 AM	#17
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	Re: F/S Blazer bucket seat tracks !! I thought that the driver's tracks were the same as bench tracks. Can't you just take the far right bench track and move it to the right side of the driver's bucket? Never tried it, just assumed that was the case. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

09-11-2008, 12:01 PM	#20
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,436	Re: F/S Blazer bucket seat tracks !! Ok, while we are on/or off the subject, are sport blazer driver seat brackets the same as truck driver bucket seat brackets?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.