closeout centerline smoothie help

[powerline84]

hey guys i asked this quesition in another thread but i am concidering doing
18/20
20/20
20/22

will any of the wheel offered on closeout work for any of these combinations. I am currently deployed so i cant measure for offset and was wondering if you guys could help me out.
here is the link
http://centerlinewheels.com/wheel_de...olt&data=6-5.5

[powerline84]

would a 5.5" backspacing work on the back and a 5" on the front?

[tcb-1]

5.5 on the back may be cutting it a bit close. for instance I was about 1" from the bed fender buckets with 8" wide rims and a 4" backspace. you can put some 1" adapters on the rear and it should be fine.

as for the front, I'm thinking the same thing. you may run into a bit of a lock to lock clearance issue, but a 3/4" spacer should help there as well.

hopefully someone with big rollers can chime in here with real world experience, but it has been done before. I forgot who it was, but someone on here even had those exact rims and a project truck.

and I like them ALOT!!!

[powerline84]

ok lets say i ordered a set of rims at full price with the perfect offset.
what offset should i get.
18s and 20s
and also 20/20

[powerline84]

more specificaly
20x9.5 rear
20x8 front

[whatnow123]

You need to figure out if you have the narrower or wide rearend. I have the the narrow rear, 4.5 backspacing on 10 inch rim and have very little room on the inside and the tire lines up with the outer fender lip on the outside.

BTW, the narrow rearend is .75 inches per side, 1.5 total narrower than the later rears. I think 70 was the switch over year so you might have either.

[bagged70]

i have the centerline zooms in 20 and 22 20 are 8.5 with back space of 5.5 22 are 9.5 with back space of 4 3/4 my truck is bagged and body dropped i am running stock rear end the truck is a short wide

[powerline84]

ok so i think i am going to order these
20x8.5 5.4" at $169.00
18x8 5.0" at 199.00
These should fit with spacers right?
1 inch rear and 3/4 front
Anybody clarfiy? At this price i would love to make them work

also anybody have these on there trucks please post pics and i would appreciate it.

[powerline84]

ok well i ordered them i am going to make them work cause they looke bad ass.
now i just need help with weel spacing and tire size

i was going to with 255/50 front and 275/55 on the origional 18s
so now that i have a 20in the rear what size rear tire should i run. i want the heights to be the same as the origional tires.

[clos69]

Try this http://www.rims-n-tires.com/info_specs

[powerline84]

thanks
i went with 275/45
and 255/45s to keep that raked look

what do guys think i should go with on spacers
half inch on each or
1 inch on rear and half or 3/4 on front
/