Boog! Help on Blazer half cab - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Boog** · 05-12-2001, 10:53 AM

Hi Randall. I also had been looking for a couple of years for one. Just knew somebody had to be making the kit. Anyway, through these message boards, and the good members here, I found a supplier with web page, pictures, etc. I emailed them and they sent me a brochure. Nice folks. There are soft tops available and the hardtop conversion from 2 different companies. The hardtop supplier is Creative Products Online. Their addy is www.creproonline.com and you can go to www.coloradok5.com/forums/wwwthreads.pl for product reviews and some other products available you might not be aware off. Glad to pass on the info. Good luck, Boog.

05-12-2001, 10:53 AM	#2
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 14,116	Hi Randall. I also had been looking for a couple of years for one. Just knew somebody had to be making the kit. Anyway, through these message boards, and the good members here, I found a supplier with web page, pictures, etc. I emailed them and they sent me a brochure. Nice folks. There are soft tops available and the hardtop conversion from 2 different companies. The hardtop supplier is Creative Products Online. Their addy is www.creproonline.com and you can go to www.coloradok5.com/forums/wwwthreads.pl for product reviews and some other products available you might not be aware off. Glad to pass on the info. Good luck, Boog. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver 'primer is finer' Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.