Where did this spring go? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**bigdon-70blazer** · 09-20-2008, 03:35 PM

I was putting the e-brake assy back in today with all the cables and lines and ended up with this spring that I don't know where it goes. I had put it in a baggie along with other part labeled e-brake stuff. All the other stuff I was able to figure out but not this. Please do not tell me that after putting stuff back togather you did not end up with stuff you couldn't figure where it went. I on the other hand did end up with this and ask your expert advice. Please help...

dwcsr · 09-20-2008, 03:59 PM

it looks like the one that pulls back the release rod

uno67 · 09-20-2008, 04:00 PM

its the spring that pops the pedal back up when you pull the release. you can barely make out the hole in the pic where it goes right after the teeth in the gear. i'm pretty sure i have a 67,68 so i don't have anything to reference. might be wrong

**uncle** · 09-20-2008, 05:09 PM

Here ya go.

berencam · 09-20-2008, 05:14 PM

that particular spring looks to big for the e-brake assy, it looks like the spring to the bench seat adjuster to me

not sure.

**bigdon-70blazer** · 09-20-2008, 07:29 PM

Quote:

Originally Posted by uncle

Here ya go.

Trouble is, I have that spring in place so that is not the place. uno67, are you talking about the same spring?

uno67 · 09-20-2008, 08:08 PM

ok i think i got it. was that truck a manual. i think its the spring for the clutch pedal.

**bigdon-70blazer** · 09-20-2008, 08:56 PM

No, it is my automatic 1970 chevy blazer! Thanks for your help!

72swbcamo · 09-20-2008, 09:31 PM

It may be the spring that goes on the end of the E-brake cable under the truck. There is a hole at the end of the threaded section that has the adjustment nuts on it. Where the intermediate brake cable is. The spring pulls the E-brake cable back from the e-brake peddle.

jef5150 · 09-20-2008, 09:40 PM

if your spring is apprx 6 inches,
possibly brake pedal return spring ....

its hard to measure up there

jeff

**bigdon-70blazer** · 09-20-2008, 10:52 PM

Quote:

Originally Posted by 72swbcamo

It may be the spring that goes on the end of the E-brake cable under the truck. There is a hole at the end of the threaded section that has the adjustment nuts on it. Where the intermediate brake cable is. The spring pulls the E-brake cable back from the e-brake peddle.

It may well be this one you are talking about. There is a hole in the end of this cable and I wondered what went there. I do not know where it hooks on to though, anybody got any ideas?

**bigdon-70blazer** · 09-20-2008, 10:53 PM

Quote:

Originally Posted by jef5150

if your spring is apprx 6 inches,
possibly brake pedal return spring ....

its hard to measure up there

jeff

Not that one, mine is still in place...

72BlckButy · 09-21-2008, 12:52 AM

What about a seat spring? I had a spring that resembled that on my bench, and I know that you have buckets... just trying to help you figure it out.

And if we only get to see pics one spring at a time, we will be there with you through out this build!

09-20-2008, 03:35 PM	#1
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,501	Where did this spring go? I was putting the e-brake assy back in today with all the cables and lines and ended up with this spring that I don't know where it goes. I had put it in a baggie along with other part labeled e-brake stuff. All the other stuff I was able to figure out but not this. Please do not tell me that after putting stuff back togather you did not end up with stuff you couldn't figure where it went. I on the other hand did end up with this and ask your expert advice. Please help... Attached Images

09-20-2008, 03:59 PM	#2
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,134	Re: Where did this spring go? it looks like the one that pulls back the release rod

09-20-2008, 04:00 PM	#3
uno67 Registered User Join Date: Mar 2003 Location: Tucson, Az Posts: 185	Re: Where did this spring go? its the spring that pops the pedal back up when you pull the release. you can barely make out the hole in the pic where it goes right after the teeth in the gear. i'm pretty sure i have a 67,68 so i don't have anything to reference. might be wrong Last edited by uno67; 09-20-2008 at 04:03 PM. Reason: i could be wrong

09-20-2008, 05:09 PM	#4
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,286	Re: Where did this spring go? Here ya go. Attached Images

09-20-2008, 05:14 PM	#5
berencam Registered User Join Date: Aug 2007 Location: branson mo Posts: 933	Re: Where did this spring go? that particular spring looks to big for the e-brake assy, it looks like the spring to the bench seat adjuster to me not sure. __________________ 69 chevy c10 350 3 speed manual wood bed build thread here r.i.p. 70 c10 auto 350 build here

09-20-2008, 08:08 PM	#7
uno67 Registered User Join Date: Mar 2003 Location: Tucson, Az Posts: 185	Re: Where did this spring go? ok i think i got it. was that truck a manual. i think its the spring for the clutch pedal.

09-20-2008, 08:56 PM	#8
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,501	Re: Where did this spring go? No, it is my automatic 1970 chevy blazer! Thanks for your help!

09-20-2008, 09:31 PM	#9
72swbcamo Active Member Join Date: Dec 2003 Location: Waterbury, CT Posts: 591	Re: Where did this spring go? It may be the spring that goes on the end of the E-brake cable under the truck. There is a hole at the end of the threaded section that has the adjustment nuts on it. Where the intermediate brake cable is. The spring pulls the E-brake cable back from the e-brake peddle.

09-20-2008, 09:40 PM	#10
jef5150 Inline 69 Join Date: Apr 2003 Location: valleysprings,california Posts: 1,018	Re: Where did this spring go? if your spring is apprx 6 inches, possibly brake pedal return spring .... its hard to measure up there jeff Attached Images

09-21-2008, 12:52 AM	#13
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Where did this spring go? What about a seat spring? I had a spring that resembled that on my bench, and I know that you have buckets... just trying to help you figure it out. And if we only get to see pics one spring at a time, we will be there with you through out this build! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) Last edited by 72BlckButy; 09-21-2008 at 12:53 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.