1979 3/4 drop with new bushings, what kind? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chrismoore701 · 09-21-2008, 08:32 PM

I am starting on my 1979 step side sport and plan to drop it 3 in front and 4 in back. I plan to use belltech spindles and rear shackles in back, but what about new rubber up front? I would like to replace all the bushings with urethane. Do you guys have any recommendations who to go with. I thought I found a place in Arizona a few years ago that had good stuff, but that was a few years ago. I need some tips. Just cleaned the frame today. This way worked pretty good to get the bottom. Engine Bright and pressure sprayer hooked up to the hot water

spudz · 09-21-2008, 09:18 PM

honestly, put rubber back in... unless you like squeaks... even the ones that arnt suposed to squeak with the grease fittings...still squeak lol... sure does handle nice tho.

bigblock73 · 09-22-2008, 12:26 PM

I swear ppl are confused about bushings. There is a difference between polyeurthane and polygraphite. Polygraphite does not squeak, polyeutherane does. I have a PST polygraphite kit in my 73, no squeaks and no problesm.

chrismoore701 · 09-22-2008, 02:33 PM

do you know of a good place to get this kit?

**N2TRUX** · 09-22-2008, 09:33 PM

Quote:

Originally Posted by chrismoore701

do you know of a good place to get this kit?

Go here- LINK

chrismoore701 · 09-23-2008, 12:40 PM

has anyone else out there used the Polygraphite set up. I think it might be the way to go.

Chris

09-21-2008, 08:32 PM	#1
chrismoore701 Registered User Join Date: Dec 2004 Location: Highland, IN Posts: 2,319	1979 3/4 drop with new bushings, what kind? I am starting on my 1979 step side sport and plan to drop it 3 in front and 4 in back. I plan to use belltech spindles and rear shackles in back, but what about new rubber up front? I would like to replace all the bushings with urethane. Do you guys have any recommendations who to go with. I thought I found a place in Arizona a few years ago that had good stuff, but that was a few years ago. I need some tips. Just cleaned the frame today. This way worked pretty good to get the bottom. Engine Bright and pressure sprayer hooked up to the hot water Attached Images Last edited by chrismoore701; 09-21-2008 at 08:32 PM.

09-21-2008, 09:18 PM	#2
spudz Registered User Join Date: Oct 2005 Location: Branchville SC Posts: 1,647	Re: 1979 3/4 drop with new bushings, what kind? honestly, put rubber back in... unless you like squeaks... even the ones that arnt suposed to squeak with the grease fittings...still squeak lol... sure does handle nice tho. __________________ 2004 z71, 96 z71 on 38s, 88 Chevy k5 blazer, 4in lift. 84 swb project, 82 SWB project , 84 chevy 4x4 lwb project, 88 Jimmy beater/highschool ride. 79 c30. 99 tahoe 4x4 project. and a bunch of parts trucks..

09-22-2008, 12:26 PM	#3
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	Re: 1979 3/4 drop with new bushings, what kind? I swear ppl are confused about bushings. There is a difference between polyeurthane and polygraphite. Polygraphite does not squeak, polyeutherane does. I have a PST polygraphite kit in my 73, no squeaks and no problesm. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

09-22-2008, 02:33 PM	#4
chrismoore701 Registered User Join Date: Dec 2004 Location: Highland, IN Posts: 2,319	Re: 1979 3/4 drop with new bushings, what kind? do you know of a good place to get this kit?

09-23-2008, 12:40 PM	#6
chrismoore701 Registered User Join Date: Dec 2004 Location: Highland, IN Posts: 2,319	Re: 1979 3/4 drop with new bushings, what kind? has anyone else out there used the Polygraphite set up. I think it might be the way to go. Chris



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.