The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 09-26-2008, 11:31 AM   #3
72BLKCHEYENNE
Registered User
 
72BLKCHEYENNE's Avatar
 
Join Date: Oct 2005
Location: FREDERICTON, NEW BRUNSWICK CANADA
Posts: 130
Re: largest diameter/width with a 3/5 or 4/6 drop

Hey there Coggonobrien,
I went with an Early classic drop of 4/5. The rims I have are Torque Thrust II's 18x8 4.5" back space 5x5 bolt pattern in the front and 20x10 5.5" back space in the rear. Tires are BFG G-Force KDW-2 255/45R18 in the front and 285/55R20 in the rear. In my opinion front tires are too small but BFG does not make a higher profile tire in the 255/R18. The rear is another story the tires were rubbing a bit on the inside so I put a 1/4" spacer to solve that problem. Also I only have about 1/4" clearance on the fender ahead of the rear tire. Rear tires look great but I wish I would have went with the 6" drop in the rear. I hope this helps.......Rick
72BLKCHEYENNE is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:03 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com