80's cab and frame, rad. sppt - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CHEVYJEFF · 02-17-2003, 11:39 AM

parting out 80's cab and frame. no title, no rust, custom spoiler molded in. Pass door is junk.

Prerunner1982 · 02-17-2003, 02:45 PM

you seem to have alot of parts.. how about 2 good 81-87 front fenders

CHEVYJEFF · 02-17-2003, 02:56 PM

Sorry, those good ones seemed to go fast and got sold. have some ones that would be good for patch panels though.lol one is on that ambulance in the other post the other in on this truck bgth are kinda rough

Prerunner1982 · 02-17-2003, 03:10 PM

i would really like the whole fender instead of a patch. i am really needing the fronts of the fenders.. but like i said would like a complete fender... have a 4x4 rolling chasis?

matt67350 · 02-17-2003, 04:51 PM

I have some that are still on the front clip need some work
but very usable. $50.00 for the clip.

matt67350 · 02-17-2003, 04:56 PM

Will this work

Prerunner1982 · 02-17-2003, 05:29 PM

could you get some better pics? or describe any dents/imperfections.
what rear axle is on that?

CHEVYJEFF · 02-17-2003, 06:32 PM

Got enough pieces to put one together. See ambulance thread for diff./ description. The guy Im listing these parts for is into building 4x4's. Here is a pic of his soon to be big foot ford. It will have the 4 wheel steering and big military axils in it when hes done.

CustomChevy · 02-17-2003, 07:33 PM

i would be interested in a windshield. where is wylie anyway??
i'm in grand prairie. thanks!

CHEVYJEFF · 02-18-2003, 10:18 AM

wylie is located east of plano. In between lavon lake and lake ray hubbard. Take 75 north to parker road go east till it dead ends and your there. I could possibly bring it with me to work as I work in downtown dallas.

02-17-2003, 11:39 AM	#1
CHEVYJEFF Registered User Join Date: Oct 2002 Location: WYLIE TEXAS Posts: 232	80's cab and frame, rad. sppt parting out 80's cab and frame. no title, no rust, custom spoiler molded in. Pass door is junk. Attached Images __________________ http://members.cardomain.com/chevyjeff 57 2 DOOR HDTP 82 CORVETTE 90 V10 BLAZER 97 REGAL LSR 2100 (BOAT)

02-17-2003, 02:45 PM	#2
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,906	you seem to have alot of parts.. how about 2 good 81-87 front fenders __________________ Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call

02-17-2003, 02:56 PM	#3
CHEVYJEFF Registered User Join Date: Oct 2002 Location: WYLIE TEXAS Posts: 232	Sorry, those good ones seemed to go fast and got sold. have some ones that would be good for patch panels though.lol one is on that ambulance in the other post the other in on this truck bgth are kinda rough Attached Images __________________ http://members.cardomain.com/chevyjeff 57 2 DOOR HDTP 82 CORVETTE 90 V10 BLAZER 97 REGAL LSR 2100 (BOAT)

02-17-2003, 03:10 PM	#4
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,906	i would really like the whole fender instead of a patch. i am really needing the fronts of the fenders.. but like i said would like a complete fender... have a 4x4 rolling chasis? __________________ Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call

02-17-2003, 04:51 PM	#5
matt67350 Registered User Join Date: May 2001 Location: Benbrook, TX Posts: 1,060	I have some that are still on the front clip need some work but very usable. $50.00 for the clip. __________________ 69 swb stepside, rebuild and upgrade in progress

02-17-2003, 04:56 PM	#6
matt67350 Registered User Join Date: May 2001 Location: Benbrook, TX Posts: 1,060	fenders Will this work __________________ 69 swb stepside, rebuild and upgrade in progress

02-17-2003, 05:29 PM	#7
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,906	could you get some better pics? or describe any dents/imperfections. what rear axle is on that? Last edited by Prerunner1982; 02-17-2003 at 05:34 PM.

02-17-2003, 06:32 PM	#8
CHEVYJEFF Registered User Join Date: Oct 2002 Location: WYLIE TEXAS Posts: 232	Got enough pieces to put one together. See ambulance thread for diff./ description. The guy Im listing these parts for is into building 4x4's. Here is a pic of his soon to be big foot ford. It will have the 4 wheel steering and big military axils in it when hes done. Attached Images __________________ http://members.cardomain.com/chevyjeff 57 2 DOOR HDTP 82 CORVETTE 90 V10 BLAZER 97 REGAL LSR 2100 (BOAT)

02-17-2003, 07:33 PM	#9
CustomChevy Registered User Join Date: Nov 2002 Posts: 462	i would be interested in a windshield. where is wylie anyway?? i'm in grand prairie. thanks!

02-18-2003, 10:18 AM	#10
CHEVYJEFF Registered User Join Date: Oct 2002 Location: WYLIE TEXAS Posts: 232	wylie is located east of plano. In between lavon lake and lake ray hubbard. Take 75 north to parker road go east till it dead ends and your there. I could possibly bring it with me to work as I work in downtown dallas. __________________ http://members.cardomain.com/chevyjeff 57 2 DOOR HDTP 82 CORVETTE 90 V10 BLAZER 97 REGAL LSR 2100 (BOAT)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.