|
10-09-2008, 10:28 AM
|
#1 |
|
Registered User
Join Date: Apr 2007
Location: Shingle springs, CA
Posts: 51
|
New cab mounts
Has anyone used the Energy Suspension cab mounts on a 67? I'm having a hell on a time alighning sheet metal and I think it's my mounts screwing me up.
Is there an advantage to using some from ECC or LMC? |
|
|
|
10-09-2008, 02:47 PM
|
#2 |
|
I am a Referee of life.
Join Date: Jun 2000
Location: Greensboro N.C.
Posts: 13,993
|
Re: New cab mounts
forsale, check your radiator core support mounts.Most cab mount kits come with the later 69-72 core support mounts.They are different IIRC taller than the 67-68.They will cause alignment nightmares.
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" Last edited by PanelDeland; 10-09-2008 at 02:47 PM. |
|
|
|
|
10-11-2008, 06:33 AM
|
#3 |
|
Senior Member
 Join Date: Mar 2000
Location: Rockville,In. USA
Posts: 3,718
|
Re: New cab mounts
PanelDeland said it right the Energy Susp. kit comes with 69-72 radiator core support mounts which are 1 1/8" to thick to use on 67&68 trucks, this will cause to tight a gap at top of fender, to wide a gap at bottom rear of fender and cause body line from door to fender to be off. In order to solve this you'll need to pick up 67-68 core support mounts. Ours can be found here
http://www.gmcpauls.com/rubber_&_weather_strip_21.htm GMCPaul |
|
|
|
|
10-11-2008, 06:51 AM
|
#4 |
|
Official Site Guitar Shredder
Join Date: May 2006
Location: Oz
Posts: 3,955
|
Re: New cab mounts
I got my kit from Wes at Classic Heartbeat......It came complete with everything...And Wes is one helluva a guy to deal with.........
|
|
|
|
|
10-11-2008, 11:24 AM
|
#5 | |
|
Project Junkie! Fishing Poor!!
 
Join Date: Dec 1999
Location: Olympia,Wa. 98512
Posts: 10,770
|
Re: New cab mounts
Thank you for the compliment bad6772. I appriciate that.
Quote:
__________________
On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys Last edited by Classic Heartbeat; 10-11-2008 at 11:25 AM. |
|
|
|
|
|
10-11-2008, 02:41 PM
|
#6 |
|
Registered User
Join Date: Apr 2007
Location: Shingle springs, CA
Posts: 51
|
Re: New cab mounts
Good info. Are the mounts on the 67-68 somwhere around a 1/4" thick? I think I have them I just thought they were missing the mount. So I did put in the 69 mount and they are throwing everything off. Thanks for the help guys.
|
|
|
|
|
10-12-2008, 07:13 AM
|
#7 |
|
Senior Member
Join Date: Mar 2000
Location: Rockville,In. USA
Posts: 3,718
|
Re: New cab mounts
forsale yes you are correct the 60-68 radiator core support rubber mounts are approx. 1/4" thick.
GMCPaul |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
