bed bolts and HEI question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

19mike69 · 02-19-2003, 08:39 PM

i was wondering if you can buy some bed mounting bolts anywhere or do you have to buy them from like LMC or somewhere like that?....my other question has to do with my HEI...i need to get a cap and rotor for it but have no clue what it came out of or what year...someone told me to get cap and rotor for a 75 chevy pickup and that will work.....does that sound right?

'72 Shorty · 02-19-2003, 08:54 PM

Don't know on the bed bolts, but I would assume you could get them anywhere, as long as you get the right size.

You should be fine with a cap & rotor from a 75, that's what I do when I need a new one.

19mike69 · 02-19-2003, 09:04 PM

ok,thank you

70cst10_05 · 02-19-2003, 09:05 PM

i bought some bed bolts at my local farm type store, carriage bolts.
kevin

DanoDMano · 02-19-2003, 09:19 PM

I just replaced mine yesterday. 3/8" X 4" I believe. I know that the length is 4", and they are carriage bolts. I also cut some rubber squares 2" X 2" and stuffed them between the bed and frame.

Vince M · 02-19-2003, 10:27 PM

Home Depot carries the bed bolts in plated, galvanized and stainless steel.

19mike69 · 02-19-2003, 11:43 PM

ok,thanks you guys....im sure they will be alot cheaper than going through a vendor

02-19-2003, 08:39 PM	#1
19mike69 Registered User Join Date: Jul 2002 Location: pottsboro,tx Posts: 513	bed bolts and HEI question i was wondering if you can buy some bed mounting bolts anywhere or do you have to buy them from like LMC or somewhere like that?....my other question has to do with my HEI...i need to get a cap and rotor for it but have no clue what it came out of or what year...someone told me to get cap and rotor for a 75 chevy pickup and that will work.....does that sound right?

02-19-2003, 08:54 PM	#2
'72 Shorty I finally got an avatar Join Date: Jan 2003 Location: Cheney, WA Posts: 180	Don't know on the bed bolts, but I would assume you could get them anywhere, as long as you get the right size. You should be fine with a cap & rotor from a 75, that's what I do when I need a new one. __________________ -72 C-10 short step (straight line only) 12.922/102.28 -69 C-20 on Propane (DD) -69 C-10 -56 Mack B-753LS (tow rig) -94 Chev K2500 Short Ex-Cab -89 Isuzu Trooper...Kinda -03 Kawasaki KFX-400 -05 Suzuki DRZ-400S

02-19-2003, 09:05 PM	#4
70cst10_05 Registered User Join Date: Dec 2002 Location: Summerfield, Ks Posts: 741	i bought some bed bolts at my local farm type store, carriage bolts. kevin __________________ 1970 Chevy CST/10 1970 Chevy CST/10 1972 Chevy C/10 1972 Chevy Suburban K/10 2019 Silverado 2500 Duramax Kevin

02-19-2003, 09:19 PM	#5
DanoDMano Pronounced "Pew-al-up" Join Date: Oct 2002 Location: Puyallup, Washington Posts: 845	I just replaced mine yesterday. 3/8" X 4" I believe. I know that the length is 4", and they are carriage bolts. I also cut some rubber squares 2" X 2" and stuffed them between the bed and frame. __________________ Classic GM Trucks of Washington Club Member 1970 FS chevy,350/350, Edelbrock cam and intake. Holley 650 carb,HEI,AT,Tangier Orange, 18's, Power Locks, Truck Photos

02-19-2003, 10:27 PM	#6
Vince M Senior Member Join Date: Apr 2000 Location: Orlando, FL Posts: 1,076	Home Depot carries the bed bolts in plated, galvanized and stainless steel. __________________ ............................................................ 68 Chevy CST SWB w/LS1, carb & 700r4. Golden Anniversary clone with a few improvements.

02-19-2003, 09:04 PM	#3
19mike69 Registered User Join Date: Jul 2002 Location: pottsboro,tx Posts: 513	ok,thank you

02-19-2003, 11:43 PM	#7
19mike69 Registered User Join Date: Jul 2002 Location: pottsboro,tx Posts: 513	ok,thanks you guys....im sure they will be alot cheaper than going through a vendor



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.