Ever wonder what that fiberglass front end saved you weight wise? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Super73 · 10-19-2008, 08:58 PM

John,

I'm going to fab up my own mounts. Most likely use some angle or flat steel on the bottom of the frame rail. Then some 3/4" ID round tube welded to it. That will allow me to put a 3/4 bolt or pin through it. I'll do the same on the fiberglass front end, then fiberglass the metal to the front end.

The bolt/pin will most likely have a set up like a tow hitch where you pull the lock out then the pins and can lift the whole front end off after tilting it.

If you want, it will most likely be pretty easy to do, I could probably slap a second set together after I do mine.

2 minute drawing..

10-19-2008, 08:58 PM	#23
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Re: Ever wonder what that fiberglass front end saved you weight wise? John, I'm going to fab up my own mounts. Most likely use some angle or flat steel on the bottom of the frame rail. Then some 3/4" ID round tube welded to it. That will allow me to put a 3/4 bolt or pin through it. I'll do the same on the fiberglass front end, then fiberglass the metal to the front end. The bolt/pin will most likely have a set up like a tow hitch where you pull the lock out then the pins and can lift the whole front end off after tilting it. If you want, it will most likely be pretty easy to do, I could probably slap a second set together after I do mine. 2 minute drawing.. __________________ ------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49 Last edited by Super73; 10-19-2008 at 09:06 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.