just orderd custom door panels - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

flamingbig10 · 10-15-2008, 08:44 PM

They attach to the door with 3M Dual loc fasteners. (HD plastic Velcro)

jrsmith_2010 · 10-15-2008, 08:50 PM

u like them? r they worth the $$?

flamingbig10 · 10-15-2008, 09:04 PM

so far, I quess so, I'll let you know more when there coverd and installed

Hazieview · 10-15-2008, 10:09 PM

So how do you grab the door panel? TvBlazer has a hole in his that you can grab like a handle.... Will this be a custom modification or I'm I seeing it wrong????

flamingbig10 · 10-15-2008, 10:16 PM

it comes with a door pull cup

LMDGUY · 10-16-2008, 12:09 AM

Quote:

Originally Posted by flamingbig10

my door panels have just arrived.

kinda funny, only one of my door panels was cut for the armrest =(

flamingbig10 · 10-16-2008, 12:46 AM

thats weird, here are the same panels with out arm rest

flamingbig10 · 10-16-2008, 01:00 AM

these are the parts I might add to my door panels
http://store.summitracing.com/partde...5&autoview=sku
http://store.summitracing.com/partde...5&autoview=sku
I also need some stainless steel to cover up my rockers

LMDGUY · 10-16-2008, 09:11 AM

Quote:

Originally Posted by flamingbig10

these are the parts I might add to my door panels
http://store.summitracing.com/partde...5&autoview=sku
http://store.summitracing.com/partde...5&autoview=sku
I also need some stainless steel to cover up my rockers

I got lucky and won sum billet window cranks last year at a car show, iam goin to find a billet "pull handle"

tvblazer78 · 10-17-2008, 09:16 AM

Sweet!! you got them.. Are you putting them on this weekend?

rod86 · 10-17-2008, 09:36 AM

hmm they look pretty nice..

flamingbig10 · 10-17-2008, 01:28 PM

Quote:

Originally Posted by tvblazer78

Sweet!! you got them.. Are you putting them on this weekend?

I hope so, but it will be a couple of weeks before there coverd

ca180 · 10-17-2008, 02:09 PM

Whats your take on leaving them un covered? I like these, but I'm not real sure how I like the raw plastic. They would be perfect for my truck, but again I really don't want to cover them. Could someone get away with leaving them raw? Or would they not look right?

Hazieview · 10-18-2008, 01:42 PM

I too wanted to buy some and leave them uncovered. I just wanted to cover the 'trim' pieces but not the whole panel. I'd be curious to see if it would work as well.

Also I just dont see how the door panel keeps from coming off???? I have to slam my doors to close them. If these things are held on with velcro then would they eventually pull loose?

What are you gunna do about the door panel with no handle???

(I'm not knocking the product I would just like to know all about them before I purchase them for myself)

**Captkaos** · 10-19-2008, 01:12 PM

I have some for my truck. Personally I wouldn't leave them uncovered. If you did, they will look JUST like the picture above.

They don't attach with "velcro" is it the same stuff custom upholsters use. It is 3M Dual Loc fasteners. Travis' Blazer is using them and he can give an unbiased opinion on them.

PickWick · 10-19-2008, 03:58 PM

do you also have them for the rear doors? i want some for my dually

**Captkaos** · 10-19-2008, 06:36 PM

they are in the works, I am supposed to hear from them this month.

PickWick · 10-19-2008, 07:18 PM

anyway i can get an update for them?like you e-mail me? im going to need these for my interior here in a month or 2.

tvblazer78 · 10-19-2008, 08:25 PM

Quote:

Originally Posted by Hazieview

I too wanted to buy some and leave them uncovered. I just wanted to cover the 'trim' pieces but not the whole panel. I'd be curious to see if it would work as well.

Also I just dont see how the door panel keeps from coming off???? I have to slam my doors to close them. If these things are held on with velcro then would they eventually pull loose?

What are you gunna do about the door panel with no handle???

(I'm not knocking the product I would just like to know all about them before I purchase them for myself)

Mine have been on for just about a year now and I have not had one problom like that. And I know mine is more show, but my doors are open and closed a lot. Chris will tell you the same thing. I think he open them 5 or 6 time just looking at it. But that is what it is for..

**Captkaos** · 10-20-2008, 01:11 PM

Quote:

Originally Posted by tvblazer78

Chris will tell you the same thing. I think he open them 5 or 6 time just looking at it. But that is what it is for..

You said you didn't mind

Quote:

Originally Posted by PickWick

anyway i can get an update for them?like you e-mail me? im going to need these for my interior here in a month or 2.

It will be posted to this board once we have them ready to order.

PickWick · 10-20-2008, 01:56 PM

what will the cost for them be?

**Captkaos** · 10-20-2008, 02:37 PM

I haven't been told yet. All of the info will be posted to this forum when they are ready for sale.

Hazieview · 10-20-2008, 09:42 PM

What are you going to do about the door panel with no handle? Will it be replaced or what?

andresco50 · 10-21-2008, 10:49 PM

I like it but I prefer the original ones

10-15-2008, 08:44 PM	#26
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: just orderd custom door panels They attach to the door with 3M Dual loc fasteners. (HD plastic Velcro) __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326 Last edited by flamingbig10; 10-15-2008 at 08:45 PM.

10-15-2008, 08:50 PM	#27
jrsmith_2010 I like turtles... Join Date: May 2008 Location: Kansas Posts: 993	Re: just orderd custom door panels u like them? r they worth the $$? __________________ 1979 Silverado- lowered 5/7, 20 inch Boss rims, everything shaved, caddy lights, billet interior, UP FOR SALE! 1983 Scottsdale-on the back burner...SOLD!!! 1992 Silverado- extended cab, stock for now, but no promises SOLD!!! 2006 Chevy Cobalt-college car, staying stock Whatever can't get fixed with a hammer, a roll of duct tape, a clothes hanger, a tube of glue, and a case of beer, can wait until tomorrow.

10-15-2008, 09:04 PM	#28
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: just orderd custom door panels so far, I quess so, I'll let you know more when there coverd and installed __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

10-15-2008, 10:09 PM	#29
Hazieview Building Dreams out of Dimes! Join Date: May 2005 Location: Bonham, Tx Posts: 892	Re: just orderd custom door panels So how do you grab the door panel? TvBlazer has a hole in his that you can grab like a handle.... Will this be a custom modification or I'm I seeing it wrong????

10-15-2008, 10:16 PM	#30
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: just orderd custom door panels it comes with a door pull cup __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

10-16-2008, 12:46 AM	#32
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: just orderd custom door panels thats weird, here are the same panels with out arm rest __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

10-16-2008, 01:00 AM	#33
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: just orderd custom door panels these are the parts I might add to my door panels http://store.summitracing.com/partde...5&autoview=sku http://store.summitracing.com/partde...5&autoview=sku I also need some stainless steel to cover up my rockers __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

10-17-2008, 09:16 AM	#35
tvblazer78 Low & Fast! Join Date: Jan 2007 Location: Knoxville, TN Posts: 3,110	Re: just orderd custom door panels Sweet!! you got them.. Are you putting them on this weekend? __________________ Southeastern Mini Truckin' Nationals April 27 and 28, 2012

10-17-2008, 09:36 AM	#36
rod86 great southern land Join Date: Feb 2008 Location: perth - australia Posts: 6,194	Re: just orderd custom door panels hmm they look pretty nice.. __________________ rod 86 chevy c10 silverado

10-17-2008, 02:09 PM	#38
ca180 tryin to get laid Join Date: Aug 2008 Location: OK Posts: 198	Re: just orderd custom door panels Whats your take on leaving them un covered? I like these, but I'm not real sure how I like the raw plastic. They would be perfect for my truck, but again I really don't want to cover them. Could someone get away with leaving them raw? Or would they not look right?

10-18-2008, 01:42 PM	#39
Hazieview Building Dreams out of Dimes! Join Date: May 2005 Location: Bonham, Tx Posts: 892	Re: just orderd custom door panels I too wanted to buy some and leave them uncovered. I just wanted to cover the 'trim' pieces but not the whole panel. I'd be curious to see if it would work as well. Also I just dont see how the door panel keeps from coming off???? I have to slam my doors to close them. If these things are held on with velcro then would they eventually pull loose? What are you gunna do about the door panel with no handle??? (I'm not knocking the product I would just like to know all about them before I purchase them for myself)

10-19-2008, 01:12 PM	#40
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Re: just orderd custom door panels I have some for my truck. Personally I wouldn't leave them uncovered. If you did, they will look JUST like the picture above. They don't attach with "velcro" is it the same stuff custom upholsters use. It is 3M Dual Loc fasteners. Travis' Blazer is using them and he can give an unbiased opinion on them. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

10-19-2008, 03:58 PM	#41
PickWick Registered User Join Date: Jul 2005 Location: Carthage, Texas Posts: 44	Re: just orderd custom door panels do you also have them for the rear doors? i want some for my dually

10-19-2008, 06:36 PM	#42
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Re: just orderd custom door panels they are in the works, I am supposed to hear from them this month. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

10-19-2008, 07:18 PM	#43
PickWick Registered User Join Date: Jul 2005 Location: Carthage, Texas Posts: 44	Re: just orderd custom door panels anyway i can get an update for them?like you e-mail me? im going to need these for my interior here in a month or 2.



Register or Log In To remove these advertisements.

10-20-2008, 01:56 PM	#46
PickWick Registered User Join Date: Jul 2005 Location: Carthage, Texas Posts: 44	Re: just orderd custom door panels what will the cost for them be?

10-20-2008, 02:37 PM	#47
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Re: just orderd custom door panels I haven't been told yet. All of the info will be posted to this forum when they are ready for sale. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

10-20-2008, 09:42 PM	#48
Hazieview Building Dreams out of Dimes! Join Date: May 2005 Location: Bonham, Tx Posts: 892	Re: just orderd custom door panels What are you going to do about the door panel with no handle? Will it be replaced or what?

10-21-2008, 10:49 PM	#49
andresco50 Registered User Join Date: Jan 2008 Location: Lakeworth, Fl Posts: 633	Re: just orderd custom door panels I like it but I prefer the original ones __________________ 2001 silverado 2wd 2003 silverado 4wd 1975 scottsdale c10 (project)

Register or Log In To remove these advertisements.