67-68 c-10 fender emblem - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**john** · 10-22-2008, 01:44 PM

Hey guys I need the measurements for the c-10 emblems on my front fenders. Thanks

rcheesem · 10-22-2008, 03:48 PM

I need them also. I asked about 2 weeks ago but did not get the answer.

mekdad · 10-22-2008, 03:58 PM

what measurements do you need

**john** · 10-22-2008, 04:16 PM

Quote:

Originally Posted by mekdad

what measurements do you need

I need the measurement from the top of the fender down to the top of the bowtie, and from the end of the bowtie to the rear edge of the fender.

mekdad · 10-22-2008, 05:02 PM

Hook the measuring tape on the top of the fender and pull it down,mine is 6 1/8 in. to top to top of bowtie.Back edge to tip of bowtie is 3 1/2 in. Mine is a 67 so it should be the same.

**john** · 10-22-2008, 05:17 PM

Thank you sir!

mekdad · 10-22-2008, 05:26 PM

Any time!

10-22-2008, 01:44 PM	#1
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	67-68 c-10 fender emblem Hey guys I need the measurements for the c-10 emblems on my front fenders. Thanks __________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/

10-22-2008, 03:48 PM	#2
rcheesem Registered User Join Date: Jul 2006 Location: Decatur, GA Posts: 72	Re: 67-68 c-10 fender emblem I need them also. I asked about 2 weeks ago but did not get the answer. __________________ 1967 c10 SWB fleetside w/396 "LuLu" http://www.rick5.com/pics/truck/truck.htm

10-22-2008, 03:58 PM	#3
mekdad Registered User Join Date: May 2008 Location: Filer, Idaho Posts: 416	Re: 67-68 c-10 fender emblem what measurements do you need __________________ you never know what you can do until you have to undo something you have done!

10-22-2008, 05:02 PM	#5
mekdad Registered User Join Date: May 2008 Location: Filer, Idaho Posts: 416	Re: 67-68 c-10 fender emblem Hook the measuring tape on the top of the fender and pull it down,mine is 6 1/8 in. to top to top of bowtie.Back edge to tip of bowtie is 3 1/2 in. Mine is a 67 so it should be the same. __________________ you never know what you can do until you have to undo something you have done! Last edited by mekdad; 10-22-2008 at 05:03 PM.

10-22-2008, 05:17 PM	#6
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	Re: 67-68 c-10 fender emblem Thank you sir! __________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/

10-22-2008, 05:26 PM	#7
mekdad Registered User Join Date: May 2008 Location: Filer, Idaho Posts: 416	Re: 67-68 c-10 fender emblem Any time! __________________ you never know what you can do until you have to undo something you have done!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.