Cross Member Drop?

[royo]

Originally Posted by HotRodYJ

Z'd the rear frame today and made 2 lower links for one of the rear axles. For the rear Z, I cut the frame 2" behind the cab and kicked the entire rear frame up 6". And for the lower links I used 1.5" DOM with 1/4" wall thickness and some poly bushings I had already on hand. Need more bushings to make the rest of the suspension links but the rear suspensions will be a three link set-up for each axle with a upper wishbone. Lower links are fully welded solid, the center bushing in the upper link will be threaded for pinion angle adjustment.

This week I hope to mount the t-case and the forward rear axle and install the two lower links on this forward axle.

pics please