Moon caps + trim wheres - where to find? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

shifty · 03-06-2008, 10:20 AM

(Oh yeah, and thanks to you too, Corn!)

corn · 03-06-2008, 10:25 AM

Good luck with the hunt!

**tnblazerk5** · 03-06-2008, 10:30 AM

here ya go , the mooneyes site

https://www.mooneyesusa.com/Store/in...2f640bd5b2d1d4

shifty · 03-06-2008, 10:31 AM

Holy Damnit!

I just measured the wheels and they're 16.5"! I thought they were 15".

Measuring the gap you showed in red is roughly 9-3/4"
Measuring from nub to nub is roughly 10"

The outer lip is 1" wide and 1-3/4" tall.

**tnblazerk5** · 03-06-2008, 10:34 AM

Quote:

Originally Posted by shifty

Holy Damnit!

I just measured the wheels and they're 16.5"! I thought they were 15".

Measuring the gap you showed in red is roughly 9-3/4"
Measuring from nub to nub is roughly 10"

The outer lip is 1" wide and 1-3/4" tall.

huh , i thought they were 15s ?????????????

shifty · 03-06-2008, 10:36 AM

The one I measured I swear had 15" tires on it, but it measured 16.5" from edge of wheel to edge of wheel?

**tnblazerk5** · 03-06-2008, 10:38 AM

they are 15s lol and i know that they wont measure 15inchs

shifty · 03-06-2008, 10:40 AM

I'm so wheel ignurnt.

I was over here hunting out 16.5" trim rings too

Duh, P235/75R15 tires, anyone?

corn · 03-06-2008, 10:53 AM

Ya, dont figure in the lip. Measure like this, should get you closer. Ill measure the moons I have tomorrow...

shifty · 03-06-2008, 10:55 AM

I can' already tell you, the lip is ~¾" on either side, which comes out to a nice round 15" wheel.

**Boog** · 03-08-2008, 06:38 AM

Quote:

Originally Posted by corn

Ya, dont figure in the lip. Measure like this, should get you closer. Ill measure the moons I have tomorrow...

or just read the size on the tire...

I know, I know, you were jus testin us weren't ya?

shifty · 03-08-2008, 07:15 AM

I was going by the size on the tire initially. I had just read somewhere on here that there were some kind of van wheels that were 16.5" and 5on5 lugs, so I was like, "what?!"

I had a senior moment.

**Boog** · 03-08-2008, 07:24 AM

Ah, the van rallys. They are 6 1/2" wide x 15".
I read that 16.5 " and I'm like (tool time Tim's grunt inserted here)! welllllllllll ok?

corn · 03-08-2008, 08:04 AM

You guys crack me up...

**Boog** · 03-08-2008, 09:20 AM

DB Smith · 10-30-2008, 03:04 PM

Did those moons turn out to be 10 1/8 ???

I'm planning on putting a pair up front and it sounds like 10 1/8 is the closest avaliable size.

I'm running stock 15" steel rims up front.

67chevemall · 10-30-2008, 03:43 PM

Sinister · 10-30-2008, 04:05 PM

http://www.hubcapmike.com/
Here's where I got my trim rings, they have baby moon hubcaps as well.

Zumo · 10-30-2008, 04:33 PM

Hell I am thinking about throwing some on my 2000 Civic Hatch.

DB Smith · 10-30-2008, 06:32 PM

Quote:

Originally Posted by 67chevemall

Click on my profile pic
The rims tires and caps are for sale

This is what I had in mind..like this shot of a 3rd member that N2TRUX found on the web....I like the simple look of these.

I have a good, new set of wheels, but no rubber for them yet, so temporarily I thought I'd clean up the old stock wheels and run them for a while.

My problem is I'm not sure these are 10 !/8 inch caps, and I don't want to order the wrong stuff.

chrislehr · 10-30-2008, 06:38 PM

I got my stuff here:
http://www.classicparts.com/

I dont think they have moons though, more OEM stuff.

Unless these count:
http://www.classicparts.com/1947-59-...ctinfo/64-195/

DB Smith · 10-30-2008, 10:16 PM

^^^^ Yeah, those guys are great. I got a lot of parts from them during my project.

I'm hoping these will work (in 10 1/8 diameter). They're cheap.

http://store.hubcapmike.com/imp-m.html (thanks "Sinister")

*Shane* · 10-31-2008, 12:35 AM

If a guy wanted to purchase a set of wheels IDENTICAL to these (with WIDE whites), what would he ask for?

chrome reverse ?

what are the center caps called?

thanks!

Sinister · 10-31-2008, 12:58 AM

Quote:

Originally Posted by Shane

If a guy wanted to purchase a set of wheels IDENTICAL to these (with WIDE whites), what would he ask for?

chrome reverse ?

what are the center caps called?

thanks!

I believe that center cap is called a bullet. Hupcap Mike's has those as well...

IvelDesigns · 10-31-2008, 02:01 AM

wow, this is the first time i've seen this thread and was surprised to see my truck.

this pic that DB posted looks exactly like my moons:

i know this thread is old, but if someone needs the info, i can go pop off a moon or ring and get you some measurements.

i can't provide any info on where to get them as they came with the truck. I do know the moons were made in Taiwan

03-06-2008, 10:20 AM	#26
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	Re: Moon caps + trim wheres - where to find? (Oh yeah, and thanks to you too, Corn!) __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

03-06-2008, 10:25 AM	#27
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Re: Moon caps + trim wheres - where to find? Good luck with the hunt! Last edited by corn; 03-06-2008 at 10:26 AM.

03-06-2008, 10:30 AM	#28
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	Re: Moon caps + trim wheres - where to find? here ya go , the mooneyes site https://www.mooneyesusa.com/Store/in...2f640bd5b2d1d4

03-06-2008, 10:31 AM	#29
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	Re: Moon caps + trim wheres - where to find? Holy Damnit! I just measured the wheels and they're 16.5"! I thought they were 15". Measuring the gap you showed in red is roughly 9-3/4" Measuring from nub to nub is roughly 10" The outer lip is 1" wide and 1-3/4" tall. __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

03-06-2008, 10:36 AM	#31
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	Re: Moon caps + trim wheres - where to find? The one I measured I swear had 15" tires on it, but it measured 16.5" from edge of wheel to edge of wheel? __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

03-06-2008, 10:38 AM	#32
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	Re: Moon caps + trim wheres - where to find? they are 15s lol and i know that they wont measure 15inchs

03-06-2008, 10:40 AM	#33
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	Re: Moon caps + trim wheres - where to find? I'm so wheel ignurnt. I was over here hunting out 16.5" trim rings too Duh, P235/75R15 tires, anyone? __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM. Last edited by shifty; 03-06-2008 at 10:42 AM.

03-06-2008, 10:53 AM	#34
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Re: Moon caps + trim wheres - where to find? Ya, dont figure in the lip. Measure like this, should get you closer. Ill measure the moons I have tomorrow... Last edited by corn; 10-10-2009 at 12:15 PM.

03-06-2008, 10:55 AM	#35
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	Re: Moon caps + trim wheres - where to find? I can' already tell you, the lip is ~¾" on either side, which comes out to a nice round 15" wheel. __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

03-08-2008, 07:15 AM	#37
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	Re: Moon caps + trim wheres - where to find? I was going by the size on the tire initially. I had just read somewhere on here that there were some kind of van wheels that were 16.5" and 5on5 lugs, so I was like, "what?!" I had a senior moment. __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

03-08-2008, 07:24 AM	#38
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,661	Re: Moon caps + trim wheres - where to find? Ah, the van rallys. They are 6 1/2" wide x 15". I read that 16.5 " and I'm like (tool time Tim's grunt inserted here)! welllllllllll ok? __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

03-08-2008, 08:04 AM	#39
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Re: Moon caps + trim wheres - where to find? You guys crack me up...

03-08-2008, 09:20 AM	#40
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,661	Re: Moon caps + trim wheres - where to find? __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

10-30-2008, 03:04 PM	#41
DB Smith Old Shovel Rider Join Date: Oct 2007 Location: Rain City, WA. Posts: 117	Re: Moon caps + trim wheres - where to find? Did those moons turn out to be 10 1/8 ??? I'm planning on putting a pair up front and it sounds like 10 1/8 is the closest avaliable size. I'm running stock 15" steel rims up front. __________________ Daryl.... *'68 C/10 Stepside* *2007 Build Page* *DS Originals* *Old Bikers.US*

10-30-2008, 03:43 PM	#42
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	Re: Moon caps + trim wheres - where to find? __________________ 1968 Chevy C10 307 3ott fleetside 1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold 1967 Chev C/10 step, 383, M21. SOLD Last edited by N2TRUX; 10-31-2008 at 08:43 AM. Reason: Please don't turn this in to a For Sale thread.



Register or Log In To remove these advertisements.

10-30-2008, 04:05 PM	#43
Sinister Between Trucks... Join Date: Mar 2002 Location: Los Angeles, CA. Posts: 3,830	Re: Moon caps + trim wheres - where to find? http://www.hubcapmike.com/ Here's where I got my trim rings, they have baby moon hubcaps as well. __________________ Beat it to fit, Paint it to match...

10-30-2008, 04:33 PM	#44
Zumo Hot Rods For Life Join Date: Sep 2001 Location: Waxahachie, TX Posts: 3,305	Re: Moon caps + trim wheres - where to find? Hell I am thinking about throwing some on my 2000 Civic Hatch. __________________ 1968 C10 LWB **SOLD* Andy Viva Los Bicicletas! Los Muertos Custom Bicycles

10-30-2008, 06:38 PM	#46
chrislehr Engine n00b Join Date: Feb 2008 Location: Austin Posts: 1,031	Re: Moon caps + trim wheres - where to find? I got my stuff here: http://www.classicparts.com/ I dont think they have moons though, more OEM stuff. Unless these count: http://www.classicparts.com/1947-59-...ctinfo/64-195/

10-30-2008, 10:16 PM	#47
DB Smith Old Shovel Rider Join Date: Oct 2007 Location: Rain City, WA. Posts: 117	Re: Moon caps + trim wheres - where to find? ^^^^ Yeah, those guys are great. I got a lot of parts from them during my project. I'm hoping these will work (in 10 1/8 diameter). They're cheap. http://store.hubcapmike.com/imp-m.html (thanks "Sinister") __________________ Daryl.... *'68 C/10 Stepside* *2007 Build Page* *DS Originals* *Old Bikers.US* Last edited by DB Smith; 10-30-2008 at 10:43 PM.

10-31-2008, 12:35 AM	#48
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Moon caps + trim wheres - where to find? If a guy wanted to purchase a set of wheels IDENTICAL to these (with WIDE whites), what would he ask for? chrome reverse ? what are the center caps called? thanks!

10-31-2008, 02:01 AM	#50
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: Moon caps + trim wheres - where to find? wow, this is the first time i've seen this thread and was surprised to see my truck. this pic that DB posted looks exactly like my moons: i know this thread is old, but if someone needs the info, i can go pop off a moon or ring and get you some measurements. i can't provide any info on where to get them as they came with the truck. I do know the moons were made in Taiwan __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007... Last edited by IvelDesigns; 10-31-2008 at 02:02 AM.

Register or Log In To remove these advertisements.