6 cyl power steering bracket question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Livrat · 10-28-2008, 05:16 PM

I am not overly familiar with the sixes so I have a question for the 6cyl guru's...
Are these brackets off of the "intregal head" 250? or a 292?? I know they do not fit the 260 in my 69..
Thanks!!!

msgross · 11-03-2008, 11:59 PM

If they fit the old style 250 I would be interested if you decide to sell

Livrat · 11-04-2008, 12:17 AM

Mike, I found out (thanks to a set on evilbay) they are definately the 1977 and newer integral head brackets... Darn!!

msgross · 11-04-2008, 12:22 AM

are they 250 integral heads? I have a set that I sold last year to a gent and he says that they are integral head brackets and they look different than yours...i'm trying to figure it out as well since I didn't know there was a difference.... Also trying to avoid a bad deal for the guy... Do you have a picture of the engine that you tried to mount them on?

Livrat · 11-04-2008, 01:32 AM

I am new to the 6cyl world so I have been going by what I find on ebay and asking questions, I have not tried to mount mine on anything as just looking at them I knew they would not work on my non integral head 250.
here is a set like yours on ebay saying 1975 and up integral head: http://cgi.ebay.com/ebaymotors/CHEVY...mZ160296135459

Here is a set like the one I found on an early 70's nova which is now on my 69 250..
http://cgi.ebay.com/ebaymotors/CHEVY...mZ360104208722

and here is a set on ebay that looked like mine, but upon closer inspection they are different.. I emailed him and he said that they were off of a 1977 250 integral head: So I have no clue what mine are off of..hmmmmmmmmm
http://cgi.ebay.com/ebaymotors/74-80...mZ150306252269

whew, I didnt realize there were so many different 6 cylinder brackets..

Would you happen to have any 250 non integral head AC brackets?

Thanks!
Mark

msgross · 11-04-2008, 08:40 AM

I'm lost too....

thanks for the info, guess i'm back to square one with the brackets...

I think i'll stay out of the PS business, unless I find the mystical 292 set of course...

PanelDeland · 11-04-2008, 05:06 PM

292 regular and integeral are different from each other and from the 250's also.Want more choices?None that work.
I looked for a while befor finding a set for a 250.I even found a few for the integeral head ones.They aren't rare but they ain't common either.

10-28-2008, 05:16 PM	#1
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	6 cyl power steering bracket question I am not overly familiar with the sixes so I have a question for the 6cyl guru's... Are these brackets off of the "intregal head" 250? or a 292?? I know they do not fit the 260 in my 69.. Thanks!!! Attached Images

11-03-2008, 11:59 PM	#2
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 6 cyl power steering bracket question If they fit the old style 250 I would be interested if you decide to sell __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

11-04-2008, 12:17 AM	#3
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: 6 cyl power steering bracket question Mike, I found out (thanks to a set on evilbay) they are definately the 1977 and newer integral head brackets... Darn!!

11-04-2008, 12:22 AM	#4
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 6 cyl power steering bracket question are they 250 integral heads? I have a set that I sold last year to a gent and he says that they are integral head brackets and they look different than yours...i'm trying to figure it out as well since I didn't know there was a difference.... Also trying to avoid a bad deal for the guy... Do you have a picture of the engine that you tried to mount them on? Attached Images __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 11-04-2008 at 12:24 AM.

11-04-2008, 01:32 AM	#5
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: 6 cyl power steering bracket question I am new to the 6cyl world so I have been going by what I find on ebay and asking questions, I have not tried to mount mine on anything as just looking at them I knew they would not work on my non integral head 250. here is a set like yours on ebay saying 1975 and up integral head: http://cgi.ebay.com/ebaymotors/CHEVY...mZ160296135459 Here is a set like the one I found on an early 70's nova which is now on my 69 250.. http://cgi.ebay.com/ebaymotors/CHEVY...mZ360104208722 and here is a set on ebay that looked like mine, but upon closer inspection they are different.. I emailed him and he said that they were off of a 1977 250 integral head: So I have no clue what mine are off of..hmmmmmmmmm http://cgi.ebay.com/ebaymotors/74-80...mZ150306252269 whew, I didnt realize there were so many different 6 cylinder brackets.. Would you happen to have any 250 non integral head AC brackets? Thanks! Mark Last edited by Livrat; 11-04-2008 at 01:36 AM.

11-04-2008, 08:40 AM	#6
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 6 cyl power steering bracket question I'm lost too.... thanks for the info, guess i'm back to square one with the brackets... I think i'll stay out of the PS business, unless I find the mystical 292 set of course... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

11-04-2008, 05:06 PM	#7
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	Re: 6 cyl power steering bracket question 292 regular and integeral are different from each other and from the 250's also.Want more choices?None that work. I looked for a while befor finding a set for a 250.I even found a few for the integeral head ones.They aren't rare but they ain't common either. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.