Bill Turner Magazine Page - The 1947 - Present Chevrolet & GMC Truck Message Board Network

adamls · 02-21-2003, 12:47 AM

Some people had asked about this guy. I scanned his magazine page and put it on my site. He has some pretty neat stuff. Do you think the under floor brake pedal assembly would get too much heat from the exhaust. I was thinking about getting this but was unsure.

The file is kinda big, it will take a while to open. I had to make it this big to get the details half way readable. If you want more detail I have a much more detailed page let me know and I will send it your way.

Sorry here is the link

http://www.cox-internet.com/switzead...ge%20Small.pdf

crazy longhorn · 02-21-2003, 10:39 AM

The old trucks(late 50's on back) all had the master under the cab. i dont think you would have too much problem with the heat , but you just need to have enough room to run the exhaust. For me, thats a lot of greenbacks for a smooth firewall, but is is a slick looking set up! crazyL

Frank_Zeller · 02-21-2003, 11:30 AM

I just got some Turners front shock relocators. They look high quality and came with the mounting hardware. If I get lucky I will installed them this weekend. Looks like a better solution than getting drop shocks. cheaper to.

Frank_Zeller · 02-21-2003, 11:56 AM

Sweet.....Just noticed their trailing arm front mount relocation kit to adjust the pinion angle.

adamls · 02-21-2003, 12:38 PM

There is still not a whole lot of detailed information on these items, especially the motor mounts. I am assuming that they bolt to the crossmember and then bolt to the new style motor mounts. Their website does not have alot of information either but they do have some interesting things.

Chad · 02-21-2003, 03:07 PM

Whats Turner Enterprises webpage??

Frank_Zeller · 02-21-2003, 03:31 PM

http://www.turnerrodsntrucks.com/pages/4/index.htm

Chad · 02-21-2003, 03:37 PM

Cool Thanks

XXL · 02-21-2003, 04:29 PM

I'm hoping this one is a typo...

COMPLETE AIR RIDE KIT STARTING AT 11700.00

02-21-2003, 12:47 AM	#1
adamls Gotta Startem Early Join Date: Oct 2001 Location: Amarillo, TX, USA Posts: 364	Bill Turner Magazine Page Some people had asked about this guy. I scanned his magazine page and put it on my site. He has some pretty neat stuff. Do you think the under floor brake pedal assembly would get too much heat from the exhaust. I was thinking about getting this but was unsure. The file is kinda big, it will take a while to open. I had to make it this big to get the details half way readable. If you want more detail I have a much more detailed page let me know and I will send it your way. Sorry here is the link http://www.cox-internet.com/switzead...ge%20Small.pdf __________________ 67 SWB In Progress, one piece at a time, maybe 3 years I will be finished

02-21-2003, 10:39 AM	#2
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,402	The old trucks(late 50's on back) all had the master under the cab. i dont think you would have too much problem with the heat , but you just need to have enough room to run the exhaust. For me, thats a lot of greenbacks for a smooth firewall, but is is a slick looking set up! crazyL __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....

02-21-2003, 11:30 AM	#3
Frank_Zeller Registered User Join Date: Jun 2001 Location: Austin, Texas Posts: 796	I just got some Turners front shock relocators. They look high quality and came with the mounting hardware. If I get lucky I will installed them this weekend. Looks like a better solution than getting drop shocks. cheaper to. __________________ 69 SWB C/10 5-6 drop 700R4 69 Firebird Convert 455 4 spd 70 Torino GT Convert Austin-Texas Last edited by Frank_Zeller; 02-21-2003 at 12:52 PM.

02-21-2003, 11:56 AM	#4
Frank_Zeller Registered User Join Date: Jun 2001 Location: Austin, Texas Posts: 796	Sweet.....Just noticed their trailing arm front mount relocation kit to adjust the pinion angle. __________________ 69 SWB C/10 5-6 drop 700R4 69 Firebird Convert 455 4 spd 70 Torino GT Convert Austin-Texas

02-21-2003, 12:38 PM	#5
adamls Gotta Startem Early Join Date: Oct 2001 Location: Amarillo, TX, USA Posts: 364	There is still not a whole lot of detailed information on these items, especially the motor mounts. I am assuming that they bolt to the crossmember and then bolt to the new style motor mounts. Their website does not have alot of information either but they do have some interesting things. __________________ 67 SWB In Progress, one piece at a time, maybe 3 years I will be finished

02-21-2003, 03:07 PM	#6
Chad Registered User Join Date: Oct 2000 Location: Midlothian, Tx Posts: 199	Whats Turner Enterprises webpage?? __________________ Chad ------------------ 69 Short Fleetside 72 2wd Blazer 70 4x4 Blazer 67 Chevy(big window) Just a cab for now 64 Chevelle SS (2dr Ht)

02-21-2003, 03:31 PM	#7
Frank_Zeller Registered User Join Date: Jun 2001 Location: Austin, Texas Posts: 796	http://www.turnerrodsntrucks.com/pages/4/index.htm __________________ 69 SWB C/10 5-6 drop 700R4 69 Firebird Convert 455 4 spd 70 Torino GT Convert Austin-Texas

02-21-2003, 03:37 PM	#8
Chad Registered User Join Date: Oct 2000 Location: Midlothian, Tx Posts: 199	Cool Thanks __________________ Chad ------------------ 69 Short Fleetside 72 2wd Blazer 70 4x4 Blazer 67 Chevy(big window) Just a cab for now 64 Chevelle SS (2dr Ht)

02-21-2003, 04:29 PM	#9
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	I'm hoping this one is a typo... COMPLETE AIR RIDE KIT STARTING AT 11700.00 __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.