took some pictures today - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jott_06 · 11-04-2008, 10:47 PM

It was a nice day so I went out and took some pictures of my truck during my lunch break. This is my 68 GMC that i bought in february of 2007. Its a work in progress. I usually drive it a few times a week even though its not done. Then the last picture is my bagged 97 sonoma i picked up about a month ago off of craigslist. Hope you enjoy

72BlckButy · 11-04-2008, 10:57 PM

Great looking project, best of luck with it!

I'm diggin' the Sonoma!

nuke1 · 11-04-2008, 11:05 PM

nice lookin trucks you got there, love the slots on the gm

*chevy29267truck* · 11-04-2008, 11:20 PM

very nice truck i am working on a 1967 chevy 3/4 ton truck

jott_06 · 11-05-2008, 07:55 AM

thanks for the compliments guys. Heres a little info on the trucks. The 68 has a 350 engine with a th400 trans. I put an aluminum intake, edlebrock carb, and full length headers on it. I also lowered it 3 inches in the front and 5 in the rear. As far as body work goes I've installed a drivers siede floor pan, drivers floor support, inner rocker and outer rocker, patched both front corners of the roof, installed a inner roof repair panel above the windsheild, shaved all the marker lights and taillight trim, and installed a rollpan. The interior has recovered door panels with grey cloth and new grey arm rest, Grey cloth bucket seats from a ford aspire, a homemade center console covered in grey cloth, and a grey dash pad.

As far as the sonoma it is just a 2.2 liter engine with 5 speed manual tranny. It is fully bagged with Air ride tech tubular control arms in the front and a monoleaf in the rear, i got a bolt in 4 link for the rear with the truck though. it lays frame on 18 inch Dante vertago rims. It has a monster c-notch and all of the valves and the compressor and tank are mounted in the bed.

thirdstreettito · 11-05-2008, 09:06 AM

Nice trucks, might want to get a better camera though, IMO.

jott_06 · 11-05-2008, 08:09 PM

yeah i agree about my camera. It doesnt take the best pictures but it was cheap and i dont take alot of pictures any way.

11-04-2008, 10:47 PM	#1
jott_06 Camaro Club Join Date: Jun 2007 Location: ohio Posts: 472	took some pictures today It was a nice day so I went out and took some pictures of my truck during my lunch break. This is my 68 GMC that i bought in february of 2007. Its a work in progress. I usually drive it a few times a week even though its not done. Then the last picture is my bagged 97 sonoma i picked up about a month ago off of craigslist. Hope you enjoy Attached Images

11-04-2008, 10:57 PM	#2
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: took some pictures today Great looking project, best of luck with it! I'm diggin' the Sonoma! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

11-04-2008, 11:05 PM	#3
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: took some pictures today nice lookin trucks you got there, love the slots on the gm __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

11-04-2008, 11:20 PM	#4
chevy29267truck Account Suspended Join Date: Sep 2008 Location: Alva Florida Posts: 668	Re: took some pictures today very nice truck i am working on a 1967 chevy 3/4 ton truck

11-05-2008, 07:55 AM	#5
jott_06 Camaro Club Join Date: Jun 2007 Location: ohio Posts: 472	Re: took some pictures today thanks for the compliments guys. Heres a little info on the trucks. The 68 has a 350 engine with a th400 trans. I put an aluminum intake, edlebrock carb, and full length headers on it. I also lowered it 3 inches in the front and 5 in the rear. As far as body work goes I've installed a drivers siede floor pan, drivers floor support, inner rocker and outer rocker, patched both front corners of the roof, installed a inner roof repair panel above the windsheild, shaved all the marker lights and taillight trim, and installed a rollpan. The interior has recovered door panels with grey cloth and new grey arm rest, Grey cloth bucket seats from a ford aspire, a homemade center console covered in grey cloth, and a grey dash pad. As far as the sonoma it is just a 2.2 liter engine with 5 speed manual tranny. It is fully bagged with Air ride tech tubular control arms in the front and a monoleaf in the rear, i got a bolt in 4 link for the rear with the truck though. it lays frame on 18 inch Dante vertago rims. It has a monster c-notch and all of the valves and the compressor and tank are mounted in the bed.

11-05-2008, 09:06 AM	#6
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: took some pictures today Nice trucks, might want to get a better camera though, IMO. __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

11-05-2008, 08:09 PM	#7
jott_06 Camaro Club Join Date: Jun 2007 Location: ohio Posts: 472	Re: took some pictures today yeah i agree about my camera. It doesnt take the best pictures but it was cheap and i dont take alot of pictures any way.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.