|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
11-12-2008, 01:47 AM
|
#1 |
|
Registered User
 Join Date: Jul 2008
Location: Grande Prairie Alberta
Posts: 59
|
Long Tube Headers For '72 K20
Wondering if any one has used the Hooker long tube headers in a k20. The reason I'm asking is I have a set of Hedman Hustler headers that I paid a grand for and they don't fit. The headers fit in the frame nice but they are too long and interfere with the t-case cross member / belly bar.
|
|
|
|
11-12-2008, 01:54 PM
|
#2 |
|
Registered User
Join Date: Jun 2003
Location: Mandan,ND
Posts: 268
|
Re: Long Tube Headers For '72 K20
I have Hedman headers on my K20 and the collectors end by the starter, they don't hang down like yours. Mine aren't the Hustlers thou. I had Hookers on my 2 wheel drive and they were real close to the tranny crossmember.
__________________
355,vortec heads, Doug Herbert cam, Performer intake, 750 Holley, Hooker Comps, 2 1/2 duals w/Aero Chambers, 2500 stall and 3.73 posi. |
|
|
|
|
11-14-2008, 03:28 PM
|
#3 |
|
Senior Member
Join Date: Jul 2004
Location: Clarks Hill, Indiana
Posts: 733
|
Re: Long Tube Headers For '72 K20
I had a similar problem with the headers off my '72 when I tried to put them on the 4X4. they stopped about 1" from the X-fer cross member. I know people run the 4X4's with headers. I was told to get headers for a chevelle... but I've never tried it to know that it works.
__________________
1969 K10 - V8, 465, 205, 12 bolt, D44 2002-current 1969 K20 - V8, 465, 221, Eaton, D44 2012-current Nothin' but drums on all 4 corners! past horses in the stable 72 C10-short step (97-02), 68 C10-long fleet (06-12) |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
