|
02-23-2003, 01:09 AM
|
#1 |
|
Registered User
Join Date: Oct 2002
Location: Rolla, Mo
Posts: 46
|
header of choice
Have a vortec 350 in my 84 c/10 2wd truck. Looking for the headers you guys prefer for our trucks. It has the serpentine setup on it too. I was looking at hedman's 69890 14 guage coated headers for 260 bucks. sound like a good deal? anything better out there for 200-275 bucks? thanks.
Keith
__________________
true power comes from above!!! 1984 C/10 2wd SWB. |
|
|
|
02-23-2003, 03:42 AM
|
#2 |
|
$640 truck// doesn't run
Join Date: Jan 2003
Location: Buckley,Wa
Posts: 122
|
I have read about Holley's addition --- Flowtech Afterbuner headers. They claim to have the torque curve of a tri-y and the upper horsepower of a big tube header, I think these are the headers I will try for my truck, and they run about $140....
Check 'em out. I'm not sure if they will fit vortec? summit racing enter ---BIG49150-- in the part number search
__________________
74 C-20 LWB camper special stock350/350 53 Chevy 1/2 ton- in California, where the rust is not. Ready for some LOVE!!! |
|
|
|
|
02-23-2003, 09:09 AM
|
#3 |
|
Registered User
Join Date: Oct 2002
Location: Rolla, Mo
Posts: 46
|
That's cool... I'd seen those in summit, is anyone actually running them? Do they seem to live up to their advertisement? The main reason i wanted a coating was to prolong life and keep engine temps down. I had a pair of flowtech coated headers on my cutlass and you sure could tell the difference in underhood temps.
Anyone running coated headers in the < $270 dollar range that they're just really excited about. speaking of vortec heads, i thought they had the same exhaust ports? Of course this is my first chevy build up so i really wouldn't know. any help? Thanks guys keith
__________________
true power comes from above!!! 1984 C/10 2wd SWB. |
|
|
|
|
02-23-2003, 09:31 AM
|
#4 |
|
Senior Member
Join Date: Jan 2003
Location: Atlantic City, NJ
Posts: 1,073
|
I'm running the Elites 69890, and have only one complaint, they hang down so low. If you are gonna lower your truck forget these. I love the construction of these headers(thick tubes and flanges) so I will probably buy the shorties for the 67-74 Chevelle. I think there are many guys running the Dynomax ceramic Chevelle shorties and love em'. The difference is that the Dynomax tubes are 1 1/2" and Hedman are 1 5/8".
__________________
86 SWB 9.0 LITER T-400-OD 4.11 eaton-4/5 drop Best 1/4 12.51 @112mph no traction 
|
|
|
|
|
02-23-2003, 10:29 AM
|
#5 |
|
Registered User
Join Date: Oct 2002
Location: Rolla, Mo
Posts: 46
|
Thanks,
My truck is at stock height right now, i had thought of droping it 2 inches later. Do you think this would interfere with the headers? What is the part number for the chevelle shorties? thanks.. Keith
__________________
true power comes from above!!! 1984 C/10 2wd SWB. |
|
|
|
|
02-23-2003, 10:38 AM
|
#6 |
|
Registered User
Join Date: Oct 2002
Location: Rolla, Mo
Posts: 46
|
When i search summit for hedman Elite shortie, Two headers come back... 68478 for 1988-92 camaro. And then 68608 for a whole bunch of stuff including Chevrolet: 262-400 1967-81 Camaro, 1964-87 Chevelle/El Camino/Malibu, 1968-79 Chevy II/Nova, 1971-91 Bel Air/B...
I'm guessing that the 68608 are the one's i'm looking for right? Thanks alot... Keith
__________________
true power comes from above!!! 1984 C/10 2wd SWB. |
|
|
|
|
02-23-2003, 12:32 PM
|
#7 |
|
Senior Member
Join Date: Jan 2003
Location: Atlantic City, NJ
Posts: 1,073
|
68608-That's the ticket!
Post some pics of your final installation 
__________________
86 SWB 9.0 LITER T-400-OD 4.11 eaton-4/5 drop Best 1/4 12.51 @112mph no traction
|
|
|
|
|
02-23-2003, 01:34 PM
|
#8 |
|
Garage Queen Material
Join Date: Oct 2002
Location: USA
Posts: 4,129
|
i'm getting those dynomax shorties unless i can find some nickel chrome plated edelbrock shorties without the a.i.r. crap
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
