6.0 Motor, 4L65e, harness, ecu, DBW pedal, Dour Thorley headers - $5500 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

atp · 11-07-2008, 10:58 PM

I have everything you need to put an LS based motor in your chevy truck. I had planned to put it in my 70 Blazer but money is short and I am putting the project on hold and selling some of the things I don't have to have to put it on the road. Here is what I have. I am asking $5500 for everything. This may seem high to some but giving it away defeats the purpose. Plus do the math and you'll see it is a pretty good deal.

Engine:

6.0 LQ9 out of a 2003 Yukon Denali XL. Approx 20K miles. Complete engine. I have replaced the oil pan with one from an F-Body so no clearance issues.

Transmission:

4L65e out of a 2003 AWD Yukon Denail XL. I had the output shaft and rear cone replaced with one from a 2wd. I had reputable Transmission shop replace the shaft and check out the tranny and he said it look really good.

Wiring Harness, computer and DPW:
The factory wiring harness was reworked by Spearteach and is labeled for easy installation. Factory computer that came with motor and tranny from Yukon. I have the drive-by-wire pedal and wiring as well.

Headers:

Headers are new in box from Doug Thorley Header. Custom built for chevy trucks. Here is how they describe them.

The headers come with all necessary bolts, gaskets and reducers. All headers are pre-polished before coating. The standard finish is ceramic coating. All headers are made from 14ga. tubing and 3/8" flanges. Every header is pressure tested on site for leaks. These headers were developed using the Classic performance products motor mount/cross member system but they have been tested on a trucks equipped with Early classic enterprises mounts.

I am including the lokar dipstick they recommend as well as the MSD Wires they recommend.

March Pulley Kit :

It is recommended that you move the AC compressor to the top and there are only a few ways to do this. I ordered an entire pulley kit for an LS motor from March. It retails for $2200. It is new in box. Part number 20085. It have a Crank pulley off of a LS motor from a

**Hart_Rod** · 11-07-2008, 11:07 PM

Super deal!!!!!!! If you decide to part, I would be interested in the wires, dipstick and harness if it will work.

atp · 11-07-2008, 11:11 PM

Here is a few pics. I do not have the coils and wires on the motor in pics but I do have. The pulley pic is the pulley kit from March.

atp · 11-07-2008, 11:13 PM

Quote:

Originally Posted by Hart_Rod

Super deal!!!!!!! If you decide to part, I would be interested in the wires, dipstick and harness if it will work.

So you think this is a fair price? You know from experience so I trust your opinion.

**Hart_Rod** · 11-07-2008, 11:20 PM

Quote:

Originally Posted by atp

So you think this is a fair price? You know from experience so I trust your opinion.

More than fair! If I didn't already have a motor for my crewcab, we'd be talkin! Seriously though, that's pretty much plug and play other than a fuel tank.....no one's going to get anywhere close to that if they try to piece it together. Best of luck.

**leddzepp** · 11-07-2008, 11:23 PM

Agree with Rob...a super deal here.

stunna · 11-07-2008, 11:28 PM

whats approximate horsepower on setup like that?

**Hart_Rod** · 11-07-2008, 11:33 PM

Quote:

Originally Posted by stunna

whats approximate horsepower on setup like that?

330-335 stock rating. It takes very little to get them to 450.......

atp · 11-07-2008, 11:36 PM

Quote:

Originally Posted by stunna

whats approximate horsepower on setup like that?

The stock LQ9 was something like 345 with 380 lb of torque. I guess in this set up you would gain a little with the headers and pulleys. I know with an LS6 intake it goes way up...

someone else may have a better idea.

jrdv · 11-08-2008, 12:07 AM

Hey Hart Rod,
Could you pick this up for me on one of your Florida trips and then come by and install it for me?

john

**Hart_Rod** · 11-08-2008, 12:14 AM

Quote:

Originally Posted by jrdv

Hey Hart Rod,
Could you pick this up for me on one of your Florida trips and then come by and install it for me?

john

I would love to,

. Maybe after I retire next summer...........

.

LUV2XCLR8 · 11-08-2008, 07:39 AM

I wish you needed a Blazer, I realize you don't, I'd luv to trade.

killer71 · 11-08-2008, 08:35 AM

Sweet deal for someone!

atp · 11-08-2008, 10:40 AM

I would consider trades on a nice SBC and some cash.

pcmcobra · 11-08-2008, 05:15 PM

I thought only silverado SS and escalade got the lq9, the rest got the lq4?
Anyway,
good deal for a near complete swap setup.

atp · 11-10-2008, 09:21 AM

Any takers - I have to make the switch sooner than later if I am going to do it...

71cadc10 · 11-10-2008, 11:14 AM

if you are parting....I will take the headers. Was the denali this came out of a flex fuel, and have the sensors etc for that system?

atp · 11-11-2008, 12:38 PM

Ttt

atp · 11-11-2008, 12:39 PM

If someone is interested in Motor and Tranny alone, I have someone interested in the rest.

rodstored-72 · 11-11-2008, 06:50 PM

bump for ya...
if the economy was better i would be all over this. i would love to put it in my '72 or a square body truck!!

good luck!

meathead95 · 11-24-2008, 07:18 PM

do you have a fuel tank for sale for efi?

short-t · 11-24-2008, 07:29 PM

PM sent.

short-t · 11-25-2008, 08:00 PM

Is this set up still for sale? I am very interested in the whole deal!

LMK,
Greg

11-07-2008, 10:58 PM	#1
atp Registered User Join Date: Apr 2007 Location: Inman, SC Posts: 1,108	6.0 Motor, 4L65e, harness, ecu, DBW pedal, Dour Thorley headers - $5500 I have everything you need to put an LS based motor in your chevy truck. I had planned to put it in my 70 Blazer but money is short and I am putting the project on hold and selling some of the things I don't have to have to put it on the road. Here is what I have. I am asking $5500 for everything. This may seem high to some but giving it away defeats the purpose. Plus do the math and you'll see it is a pretty good deal. Engine: 6.0 LQ9 out of a 2003 Yukon Denali XL. Approx 20K miles. Complete engine. I have replaced the oil pan with one from an F-Body so no clearance issues. Transmission: 4L65e out of a 2003 AWD Yukon Denail XL. I had the output shaft and rear cone replaced with one from a 2wd. I had reputable Transmission shop replace the shaft and check out the tranny and he said it look really good. Wiring Harness, computer and DPW: The factory wiring harness was reworked by Spearteach and is labeled for easy installation. Factory computer that came with motor and tranny from Yukon. I have the drive-by-wire pedal and wiring as well. Headers: Headers are new in box from Doug Thorley Header. Custom built for chevy trucks. Here is how they describe them. The headers come with all necessary bolts, gaskets and reducers. All headers are pre-polished before coating. The standard finish is ceramic coating. All headers are made from 14ga. tubing and 3/8" flanges. Every header is pressure tested on site for leaks. These headers were developed using the Classic performance products motor mount/cross member system but they have been tested on a trucks equipped with Early classic enterprises mounts. I am including the lokar dipstick they recommend as well as the MSD Wires they recommend. March Pulley Kit : It is recommended that you move the AC compressor to the top and there are only a few ways to do this. I ordered an entire pulley kit for an LS motor from March. It retails for $2200. It is new in box. Part number 20085. It have a Crank pulley off of a LS motor from a

11-07-2008, 11:07 PM	#2
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,846	Re: 6.0 Motor, 4L65e, harness, ecu, DBW pedal, Dour Thorley headers - $5500 Super deal!!!!!!! If you decide to part, I would be interested in the wires, dipstick and harness if it will work. Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 Last edited by Hart_Rod; 11-07-2008 at 11:25 PM.

11-07-2008, 11:11 PM	#3
atp Registered User Join Date: Apr 2007 Location: Inman, SC Posts: 1,108	Re: 6.0 Motor, 4L65e, harness, ecu, DBW pedal, Dour Thorley headers - $5500 Here is a few pics. I do not have the coils and wires on the motor in pics but I do have. The pulley pic is the pulley kit from March. Attached Images

11-07-2008, 11:23 PM	#6
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,005	Re: 6.0 Motor, 4L65e, harness, ecu, DBW pedal, Dour Thorley headers - $5500 Agree with Rob...a super deal here.

11-07-2008, 11:28 PM	#7
stunna Registered User Join Date: Nov 2006 Location: high point nc Posts: 442	Re: 6.0 Motor, 4L65e, harness, ecu, DBW pedal, Dour Thorley headers - $5500 whats approximate horsepower on setup like that?

11-08-2008, 12:07 AM	#10
jrdv Registered User Join Date: Apr 2000 Location: new mexico Posts: 948	Re: 6.0 Motor, 4L65e, harness, ecu, DBW pedal, Dour Thorley headers - $5500 Hey Hart Rod, Could you pick this up for me on one of your Florida trips and then come by and install it for me? john __________________ 1972 3/4T 4x4 Chevrolet (383) 1971 c-10 SWB (400 sb) 1972 4x4 Blazer 1969 SWB 4x4 GMC Projects: 1972 stepside 4x4 http://67-72chevytrucks.com/vboard/s...d.php?t=280132 http://67-72chevytrucks.com/vboard/s...d.php?t=285952 http://67-72chevytrucks.com/vboard/s...d.php?t=553672 http://67-72chevytrucks.com/vboard/s...d.php?t=522704

11-08-2008, 07:39 AM	#12
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,477	Re: 6.0 Motor, 4L65e, harness, ecu, DBW pedal, Dour Thorley headers - $5500 I wish you needed a Blazer, I realize you don't, I'd luv to trade. __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

11-08-2008, 08:35 AM	#13
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: 6.0 Motor, 4L65e, harness, ecu, DBW pedal, Dour Thorley headers - $5500 Sweet deal for someone! __________________ R.I.P. Killer 71 10/26/07

11-08-2008, 10:40 AM	#14
atp Registered User Join Date: Apr 2007 Location: Inman, SC Posts: 1,108	Re: 6.0 Motor, 4L65e, harness, ecu, DBW pedal, Dour Thorley headers - $5500 I would consider trades on a nice SBC and some cash.

11-08-2008, 05:15 PM	#15
pcmcobra Registered User Join Date: Aug 2006 Location: Florida Posts: 1,684	Re: 6.0 Motor, 4L65e, harness, ecu, DBW pedal, Dour Thorley headers - $5500 I thought only silverado SS and escalade got the lq9, the rest got the lq4? Anyway, good deal for a near complete swap setup. __________________ 1986 C10 SWB 6.0/6l90e Miami...Flee it like a native

11-10-2008, 09:21 AM	#16
atp Registered User Join Date: Apr 2007 Location: Inman, SC Posts: 1,108	Re: 6.0 Motor, 4L65e, harness, ecu, DBW pedal, Dour Thorley headers - $5500 Any takers - I have to make the switch sooner than later if I am going to do it...

11-10-2008, 11:14 AM	#17
71cadc10 Registered User Join Date: Apr 2004 Location: Boiling Springs, PA Posts: 435	Re: 6.0 Motor, 4L65e, harness, ecu, DBW pedal, Dour Thorley headers - $5500 if you are parting....I will take the headers. Was the denali this came out of a flex fuel, and have the sensors etc for that system? __________________ 71 C10 long bed, 2003 6.0L, 06GTO E40, T56, 12bolt 4.10 rear

11-11-2008, 12:38 PM	#18
atp Registered User Join Date: Apr 2007 Location: Inman, SC Posts: 1,108	Re: 6.0 Motor, 4L65e, harness, ecu, DBW pedal, Dour Thorley headers - $5500 Ttt

11-11-2008, 12:39 PM	#19
atp Registered User Join Date: Apr 2007 Location: Inman, SC Posts: 1,108	Re: 6.0 Motor, 4L65e, harness, ecu, DBW pedal, Dour Thorley headers - $5500 If someone is interested in Motor and Tranny alone, I have someone interested in the rest.

11-11-2008, 06:50 PM	#20
rodstored-72 chevy truck fan Join Date: Mar 2005 Location: Gilbert, arizona 85298 Posts: 1,989	Re: 6.0 Motor, 4L65e, harness, ecu, DBW pedal, Dour Thorley headers - $5500 bump for ya... if the economy was better i would be all over this. i would love to put it in my '72 or a square body truck!! good luck!



Register or Log In To remove these advertisements.

11-24-2008, 07:18 PM	#21
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	Re: 6.0 Motor, 4L65e, harness, ecu, DBW pedal, Dour Thorley headers - $5500 do you have a fuel tank for sale for efi? __________________ 72 2wd blazer 72 swb 4x4

11-24-2008, 07:29 PM	#22
short-t Registered User Join Date: Mar 2008 Location: Calgary, ab Posts: 325	Re: 6.0 Motor, 4L65e, harness, ecu, DBW pedal, Dour Thorley headers - $5500 PM sent.

11-25-2008, 08:00 PM	#23
short-t Registered User Join Date: Mar 2008 Location: Calgary, ab Posts: 325	Re: 6.0 Motor, 4L65e, harness, ecu, DBW pedal, Dour Thorley headers - $5500 Is this set up still for sale? I am very interested in the whole deal! LMK, Greg

Register or Log In To remove these advertisements.