Check out what i just found - The 1947 - Present Chevrolet & GMC Truck Message Board Network

robertspangler · 11-25-2008, 12:45 AM

LOOK AT WHAT I JUST FOUND ON EBAY, IM IN TALKS WITH THE GUY ON BUYING IT, WHAT DO YOU THINK A GOOD PRICE WOULD BE ON THIS .

http://cgi.ebay.com/ebaymotors/Compl...Q5fAccessories

BigAl · 11-25-2008, 07:08 AM

Depends - I bought my whole truck for $500... And it runs...

**old Rusty C10** · 11-25-2008, 11:13 AM

id take a stab at what the new bedsides go for as well as aftermarket floor. id try to score it for $1000 or so prolly will sell a little higher but it does need plastic so its not perfect

cman3899 · 11-25-2008, 12:27 PM

that is pretty steep, but beds aren't cheap these days. I need one too, but I might try my hand at buying bed sides and do my own body work. whats the worst that can happen?

84 400 · 11-25-2008, 02:40 PM

Not sure about a short bed but a clean original non rusted Long bed up here goes for 500 +.

kevinr1970 · 11-25-2008, 04:03 PM

Damn!
I had two swb's for sale over the spring/summer and ended up selling the one for $250?

robertspangler · 11-25-2008, 08:03 PM

well i just got an email back from him and he said he wanted 1800 with tailgate and 1700 without tailgate and wouldnt budge. I personaly think that its expensive, i am looking for a nice shortbed tailgate and i found one on craigs list a month or so ago for 400 bucks but didnt snatch it up and i should have. Ugg, I guess i will keep looking.

gchemist · 11-25-2008, 09:01 PM

I bought a used bed for $250.

d10s69c10 · 11-25-2008, 09:07 PM

give this dude a little while.. he will drop that price.

i love how people set reserves. i mean why start lower than what you will sell it for?

sjarrett71 · 11-25-2008, 10:28 PM

Wow, I thought we were talking about a whole truck until I looked at the ad. 1800 bucks for just a bed?!?

Rollinsqrbdy · 11-25-2008, 11:40 PM

1800 for a bed? Thats insane!!! Around here their everywhere. I just gave a buddy of mine a swb for a 79 for free. I have a bed swb for a 85 left. I better start to save them things and start to make sum profit. People around here just make them into trailers. Their everywhere. Seems like im the only one that likes the squarebodies around here. I guess thats good for me.

robertspangler · 11-25-2008, 11:45 PM

dang wish i was in new mexico, i cant find a swb bed around here that is in good shape. If you know where they are any around for my 78 that are in excellent shape, let me know it may be worth my drive to go there, its only what a 2 day drive from ohio lol.

Hoods69BadBowTie · 11-26-2008, 01:34 AM

Wow thats crazy just a little bit steep for the bed. I thought it was a whole truck too at first.

**thinair** · 11-26-2008, 04:21 AM

so you guys in states where it doesn't snow,or where they do not use salt,think that this price is INSANE.............call your local GM dealer and see if you can EVEN get NEW GM sides anymore..............new long sides here 10 years ago were $800 ea from GM,short side even more,and it depends on which side to how much it WAS.......new AFTERMARKET floor 5 years ago IF you could get it was $500......BARE tailgate 10 years ago,$300.......now throw in the latch assembly and the wheel tubs.........where are you at today???????

turbotank · 11-26-2008, 11:43 AM

Well,thinair,for all that money,I would tell you to come get some grits and buy a bed down here!I wouldn't pay $1800 for just a bed!!!! Thats retarded.I bet you could find an immaculate "used" one for cheaper then that. Like everyone else said,there are people down here making them into trailers!!!!While Im at it,I might as well sell the bed off my parts truck for $500,COMPLETE WITH TAILGATE!!!!!!Discount for rust!!!!!!!!! If they are worth that much gold!!!

Mr79C10 · 11-26-2008, 05:48 PM

$600 for the bed and reserve is not met. But he has a front clip for $200?

Pyrotechnic · 11-26-2008, 05:52 PM

I recall someone on here buying some aftermarket bed sides and not being too happy. Said that they worked but required skimming with filler to get them perfect. Factory GM is the way to go if you can get your hands on them, but this guy has been hitting the pipe a little too much.

andrist1 · 11-26-2008, 06:10 PM

Yeah I too bought a donor that ran for $600.00 and had an immaculate bed on it. I have since parted out the remaining parts cab, fenders, etc for 3 times what the inital price was, and I still have all the drivetrain! If I were you I would look for a nice donor. .002

robertspangler · 11-26-2008, 11:51 PM

i have been looking, but am having no luck, i found a bed im going to go look at no rust looked real good but had a couple dents in it, he wanted 350 for the bed i think i may be able to pop them out but not sure.

11-25-2008, 12:45 AM	#1
robertspangler Registered User Join Date: Oct 2008 Location: Archbold Ohio Posts: 42	Check out what i just found LOOK AT WHAT I JUST FOUND ON EBAY, IM IN TALKS WITH THE GUY ON BUYING IT, WHAT DO YOU THINK A GOOD PRICE WOULD BE ON THIS . http://cgi.ebay.com/ebaymotors/Compl...Q5fAccessories

11-25-2008, 07:08 AM	#2
BigAl Registered User Join Date: Mar 2008 Location: New York Posts: 18	Re: Check out what i just found Depends - I bought my whole truck for $500... And it runs...

11-25-2008, 11:13 AM	#3
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,287	Re: Check out what i just found id take a stab at what the new bedsides go for as well as aftermarket floor. id try to score it for $1000 or so prolly will sell a little higher but it does need plastic so its not perfect __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

11-25-2008, 12:27 PM	#4
cman3899 Registered User Join Date: Nov 2008 Location: Wichita, KS Posts: 24	Re: Check out what i just found that is pretty steep, but beds aren't cheap these days. I need one too, but I might try my hand at buying bed sides and do my own body work. whats the worst that can happen?

11-25-2008, 02:40 PM	#5
84 400 Sb 400 club Join Date: Nov 2005 Location: NH / MA Posts: 2,741	Re: Check out what i just found Not sure about a short bed but a clean original non rusted Long bed up here goes for 500 +. __________________ 1984 chevy c10, built 400sb,.(SOLD) 77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363 1956 Willys Wagon (327 chevy) Project (Now Buick 225) 1980 Corvette L-48 4 speed 1992 Mustang GT built 5.0 5 speed 1985 C10 LWB Sold 1982 K10 SWB plow truck Parted out 1986 D30 M1028 fire brush truck Parted out Last edited by 84 400; 11-25-2008 at 05:08 PM.

11-25-2008, 04:03 PM	#6
kevinr1970 Senior Member Join Date: Aug 2004 Location: Everett, WA Posts: 2,316	Re: Check out what i just found Damn! I had two swb's for sale over the spring/summer and ended up selling the one for $250? __________________ 2009 Honda Fit CfC (bsf 44.9 mpg) 2000 Tahoe Limited 1991 GMC CrewCab Dually 2wd, will end up swb, not dually and replace CCswb below 1991 GMC CrewCab Dually 4x4, just going to fix things up for now 1982/1989 K5/GMC Jimmy 2wd 1987 GMC 1/2 ton swb 2wd Crew (sold)

11-25-2008, 08:03 PM	#7
robertspangler Registered User Join Date: Oct 2008 Location: Archbold Ohio Posts: 42	Re: Check out what i just found well i just got an email back from him and he said he wanted 1800 with tailgate and 1700 without tailgate and wouldnt budge. I personaly think that its expensive, i am looking for a nice shortbed tailgate and i found one on craigs list a month or so ago for 400 bucks but didnt snatch it up and i should have. Ugg, I guess i will keep looking.

11-25-2008, 09:01 PM	#8
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Re: Check out what i just found I bought a used bed for $250. __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

11-25-2008, 09:07 PM	#9
d10s69c10 Built 4 Speed Join Date: May 2008 Location: Geneva FL Posts: 619	Re: Check out what i just found give this dude a little while.. he will drop that price. i love how people set reserves. i mean why start lower than what you will sell it for? __________________ 1969 C/10 Short Box: 496/T-56 in worx. "To Be Old And Wise, First You Must Be Young And Stupid"

11-25-2008, 10:28 PM	#10
sjarrett71 Registered User Join Date: Dec 2006 Location: Rolla, MO Posts: 2,463	Re: Check out what i just found Wow, I thought we were talking about a whole truck until I looked at the ad. 1800 bucks for just a bed?!? __________________ -Scott-

11-25-2008, 11:40 PM	#11
Rollinsqrbdy Registered User Join Date: Aug 2008 Location: Dexter, N.M. Posts: 1,082	Re: Check out what i just found 1800 for a bed? Thats insane!!! Around here their everywhere. I just gave a buddy of mine a swb for a 79 for free. I have a bed swb for a 85 left. I better start to save them things and start to make sum profit. People around here just make them into trailers. Their everywhere. Seems like im the only one that likes the squarebodies around here. I guess thats good for me. __________________ Its Kool to be a square 2013 Chevy Silverado Z71 w/ 7" lift and 35" Nitto's 1985 C-10 ......My dream truck (under construction) 1984 k 10 Silverado...6" lift with 38.5 super swampers New Mexico Member --- Member of the Square Body Club---

11-25-2008, 11:45 PM	#12
robertspangler Registered User Join Date: Oct 2008 Location: Archbold Ohio Posts: 42	Re: Check out what i just found dang wish i was in new mexico, i cant find a swb bed around here that is in good shape. If you know where they are any around for my 78 that are in excellent shape, let me know it may be worth my drive to go there, its only what a 2 day drive from ohio lol.

11-26-2008, 01:34 AM	#13
Hoods69BadBowTie Chevys Kick A$$ Join Date: Jan 2005 Location: Zootown, MT Posts: 12,699	Re: Check out what i just found Wow thats crazy just a little bit steep for the bed. I thought it was a whole truck too at first. __________________ HOODS is what I answer too -'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold -'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit -'86 K5 Blazer Silverado 6.2 4" lift 35"s -'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's -'83 Monte Carlo T-Tops. 126,500 Original Miles -LATER I would rather push a Chevy then drive a ford!!

11-26-2008, 04:21 AM	#14
thinair thinair Join Date: Jun 2004 Location: omaha,ne Posts: 1,005	Re: Check out what i just found so you guys in states where it doesn't snow,or where they do not use salt,think that this price is INSANE.............call your local GM dealer and see if you can EVEN get NEW GM sides anymore..............new long sides here 10 years ago were $800 ea from GM,short side even more,and it depends on which side to how much it WAS.......new AFTERMARKET floor 5 years ago IF you could get it was $500......BARE tailgate 10 years ago,$300.......now throw in the latch assembly and the wheel tubs.........where are you at today??????? Last edited by thinair; 11-26-2008 at 04:24 AM.

11-26-2008, 11:43 AM	#15
turbotank Registered User Join Date: Oct 2008 Location: Lake City FL Posts: 114	Re: Check out what i just found Well,thinair,for all that money,I would tell you to come get some grits and buy a bed down here!I wouldn't pay $1800 for just a bed!!!! Thats retarded.I bet you could find an immaculate "used" one for cheaper then that. Like everyone else said,there are people down here making them into trailers!!!!While Im at it,I might as well sell the bed off my parts truck for $500,COMPLETE WITH TAILGATE!!!!!!Discount for rust!!!!!!!!! If they are worth that much gold!!! __________________ The general is always in charge You guys did this to me!!!!!!!!!!!!!!!!!!!!



Register or Log In To remove these advertisements.

11-26-2008, 05:48 PM	#16
Mr79C10 It Is What It Is,,,, Join Date: Aug 2006 Location: The Gun Shine StateFlorida* Posts: 1,765	Re: Check out what i just found $600 for the bed and reserve is not met. But he has a front clip for $200? __________________ 79 C10 Short Box ST8 6 bang'r Lowered w/ 3" Control arms, 2" Lower Coils and 4" shackles and hangers W/ FLIP KIT __--__* 79 C-10 project* .........................__ ..............._____ l __\___ ..............\|_(O)_ \|___(O) ] FAQ INDEX Thread The Kulture My Rat Den

11-26-2008, 05:52 PM	#17
Pyrotechnic Registered User Join Date: Feb 2007 Location: Austin, TX Posts: 3,930	Re: Check out what i just found I recall someone on here buying some aftermarket bed sides and not being too happy. Said that they worked but required skimming with filler to get them perfect. Factory GM is the way to go if you can get your hands on them, but this guy has been hitting the pipe a little too much. __________________ 1977 GMC Sierra Grande

11-26-2008, 06:10 PM	#18
andrist1 Registered User Join Date: Nov 2006 Location: Snohomish, Washington Posts: 88	Re: Check out what i just found Yeah I too bought a donor that ran for $600.00 and had an immaculate bed on it. I have since parted out the remaining parts cab, fenders, etc for 3 times what the inital price was, and I still have all the drivetrain! If I were you I would look for a nice donor. .002

11-26-2008, 11:51 PM	#19
robertspangler Registered User Join Date: Oct 2008 Location: Archbold Ohio Posts: 42	Re: Check out what i just found i have been looking, but am having no luck, i found a bed im going to go look at no rust looked real good but had a couple dents in it, he wanted 350 for the bed i think i may be able to pop them out but not sure.

Register or Log In To remove these advertisements.