10 Bolt differences between '87 and '88 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gchemist · 01-24-2002, 04:46 PM

John,

The rear ends from the first years of the 88+ models will bolt right in. The only difference is how they are bolted up. The new style have the "U" turned 90 degrees from older style. The older style have the U bolts on the axel itself. The new style don't. Just check the photos on my setup and compare it to your setup. http://www.geocities.com/abetterchem...ustombars.html
------------------
Gerardo
1983 Custom Truck
TX Plates: "BAD BOW"
http://www.geocities.com/abetterchemist/

[This message has been edited by gchemist (edited 01-24-2002).]

01-24-2002, 04:46 PM	#4
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	John, The rear ends from the first years of the 88+ models will bolt right in. The only difference is how they are bolted up. The new style have the "U" turned 90 degrees from older style. The older style have the U bolts on the axel itself. The new style don't. Just check the photos on my setup and compare it to your setup. http://www.geocities.com/abetterchem...ustombars.html ------------------ Gerardo 1983 Custom Truck TX Plates: "BAD BOW" http://www.geocities.com/abetterchemist/ [This message has been edited by gchemist (edited 01-24-2002).] __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.