350 heads worth anything stock? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

stump · 11-16-2008, 04:44 PM

i have a 350 out of an 88 that i dont need and no one locally wants to buy it so i was woundrin if the heads or any other parts are worth money on ebay? im only 16 and am trying to get money to fund my 87 build so dont ditch on me please.

tommie · 11-16-2008, 09:11 PM

The TBI 350's from 87-95 are really not worth that much, unless it had just been rebuilt, usually no one is going to give you more than a core price. I have had them given to me for free before.... Have you tried to list it on craigslist?

piecesparts · 11-16-2008, 09:49 PM

You have an engine that is one of many. Matter of fact there are hundreds of them out there. I agree, unless the heads are recently rebuilt and you have no money in them, you might be able to sell them---However, I believe that you are the owner of a set of heads and will have problems moving them. If the engine runs, there may be some poor soul that needs a running replacement and is looking for a deal so try to move it that way.

Hoods69BadBowTie · 11-17-2008, 07:43 AM

Not really because there are so many Chevy parts floating around. Unless they have been recently rebuilt. If the motors together and runs I would try selling the whole thing or sell it as a rebuildable motor. Try craigslist if you have n't already. Good luck

scotts62 · 11-17-2008, 08:46 AM

You can prob still get a $100 bucks for the pair maybe

stump · 11-17-2008, 05:37 PM

yeah if there worth that i would sell them.. im just trying to get 200-300 out of the whole motor

70rs/ss · 11-17-2008, 05:58 PM

The block itself is worth some $$$ because it should be a 1-piece rear main with a roller cam (at least capable of a roller cam) which is desirable to an engine builder to keep the flat tappet cams from going flat with the "new" oil.

stump · 11-17-2008, 11:15 PM

i have another 350 with heads and bigger valves im picking up.. would it be better to use this bottomend with the other heads? either way im gona rebuild what one i use so its not a big deal.

sean1969c10 · 12-03-2008, 06:18 PM

I personaly like the late model 1pc seal 350 blocks. You have to remember that these blocks are a more refined version of the classic gen 1 SBC, and they open up the option to run a roller cam. The heads that were on the TBI 350s were some of the worst flowing SBC factory heads ever, but if they are not cracked they have core value for someone needing stock heads.

11-16-2008, 04:44 PM	#1
stump Registered User Join Date: Jun 2008 Location: bangor maine Posts: 161	350 heads worth anything stock? i have a 350 out of an 88 that i dont need and no one locally wants to buy it so i was woundrin if the heads or any other parts are worth money on ebay? im only 16 and am trying to get money to fund my 87 build so dont ditch on me please.

11-16-2008, 09:11 PM	#2
tommie 97' Tahoe 2dr/2wd Join Date: Jul 2002 Location: Huffman,TX Posts: 1,168	Re: 350 heads worth anything stock? The TBI 350's from 87-95 are really not worth that much, unless it had just been rebuilt, usually no one is going to give you more than a core price. I have had them given to me for free before.... Have you tried to list it on craigslist?

11-16-2008, 09:49 PM	#3
piecesparts Parts and more parts Join Date: Nov 2003 Location: Lebo, Kansas (middle of nowhere Posts: 6,821	Re: 350 heads worth anything stock? You have an engine that is one of many. Matter of fact there are hundreds of them out there. I agree, unless the heads are recently rebuilt and you have no money in them, you might be able to sell them---However, I believe that you are the owner of a set of heads and will have problems moving them. If the engine runs, there may be some poor soul that needs a running replacement and is looking for a deal so try to move it that way.

11-17-2008, 07:43 AM	#4
Hoods69BadBowTie Chevys Kick A$$ Join Date: Jan 2005 Location: Zootown, MT Posts: 12,699	Re: 350 heads worth anything stock? Not really because there are so many Chevy parts floating around. Unless they have been recently rebuilt. If the motors together and runs I would try selling the whole thing or sell it as a rebuildable motor. Try craigslist if you have n't already. Good luck __________________ HOODS is what I answer too -'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold -'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit -'86 K5 Blazer Silverado 6.2 4" lift 35"s -'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's -'83 Monte Carlo T-Tops. 126,500 Original Miles -LATER I would rather push a Chevy then drive a ford!!

11-17-2008, 08:46 AM	#5
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: 350 heads worth anything stock? You can prob still get a $100 bucks for the pair maybe __________________ Scott 93 crew cab build Project 62

11-17-2008, 05:37 PM	#6
stump Registered User Join Date: Jun 2008 Location: bangor maine Posts: 161	Re: 350 heads worth anything stock? yeah if there worth that i would sell them.. im just trying to get 200-300 out of the whole motor

11-17-2008, 05:58 PM	#7
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,270	Re: 350 heads worth anything stock? The block itself is worth some $$$ because it should be a 1-piece rear main with a roller cam (at least capable of a roller cam) which is desirable to an engine builder to keep the flat tappet cams from going flat with the "new" oil.

11-17-2008, 11:15 PM	#8
stump Registered User Join Date: Jun 2008 Location: bangor maine Posts: 161	Re: 350 heads worth anything stock? i have another 350 with heads and bigger valves im picking up.. would it be better to use this bottomend with the other heads? either way im gona rebuild what one i use so its not a big deal.

12-03-2008, 06:18 PM	#9
sean1969c10 Registered User Join Date: Mar 2008 Location: Powhatan, Va. Posts: 377	Re: 350 heads worth anything stock? I personaly like the late model 1pc seal 350 blocks. You have to remember that these blocks are a more refined version of the classic gen 1 SBC, and they open up the option to run a roller cam. The heads that were on the TBI 350s were some of the worst flowing SBC factory heads ever, but if they are not cracked they have core value for someone needing stock heads.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.