250 I6 Power Seering Pump, Pulley and Brackets - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mosesburb · 12-06-2008, 03:53 AM

Power steering pump, pulley and brackets off of a 250 with a non-integral head.

Pulled from a driver about 15 yrs ago. Pump will probably need a re-seal.

$75.00 + ship Please respond in thread.

Thanks!!

altunaa · 12-06-2008, 07:06 AM

hi mosesburb, i am interested, put me first in the line.
can you post more pictures? it seems to be missing the bracket that holds the pump to the upper bracket.
anyway i need just the bracket that attaches to the engine, can you sell it separately?
how much shipped to 07801?

mosesburb · 12-06-2008, 03:09 PM

Quote:

Originally Posted by altunaa

hi mosesburb, i am interested, put me first in the line.
can you post more pictures? it seems to be missing the bracket that holds the pump to the upper bracket.
anyway i need just the bracket that attaches to the engine, can you sell it separately?
how much shipped to 07801?

I did not realize there was something missing. Do you know what this missing piece looks like?? I may have it here but not know it.

I do not want to separate the brackets. Shipping on the assembly would be about $15.00.

RJGeister · 12-06-2008, 03:46 PM

It looks like you're missing the twisted looking bracket that goes from the back to the block.

mosesburb · 12-06-2008, 04:34 PM

Quote:

Originally Posted by RJGeister

It looks like you're missing the twisted looking bracket that goes from the back to the block.

Ahhh, ok. I know it never had that on it, so I do not have it.

That being the case, NEW PRICE: $75.00 SHIPPED

altunaa · 12-07-2008, 02:22 PM

hi mosesburb,
i will take it, do you accept paypal? if so, please pm your info.
thanks, best regards

mosesburb · 12-07-2008, 03:04 PM

PM sent

altunaa · 12-07-2008, 06:07 PM

hi mosesburb,
already sent the payment and the shipping address in nj.
as i have told you, i don't need the pump and pulley, so you can keep them, maybe someone else is looking for one of those.
thanks again, best regards,
arturo

12-06-2008, 03:53 AM	#1
mosesburb I had a V-8 Join Date: May 2003 Location: Phoenix AZ Posts: 1,116	250 I6 Power Seering Pump, Pulley and Brackets Power steering pump, pulley and brackets off of a 250 with a non-integral head. Pulled from a driver about 15 yrs ago. Pump will probably need a re-seal. $75.00 + ship Please respond in thread. Thanks!! __________________ 1972 K20 Suburban, 5.9L Cummins, Banks Power Pack, NV4500HD, NP205, H.A.D., D60/14FF ARB Link To Build: HERE. Last edited by mosesburb; 12-20-2008 at 12:57 PM.

12-06-2008, 07:06 AM	#2
altunaa Registered User Join Date: Jan 2006 Location: Uruguay Posts: 101	Re: 250 I6 Power Seering Pump, Pulley and Brackets hi mosesburb, i am interested, put me first in the line. can you post more pictures? it seems to be missing the bracket that holds the pump to the upper bracket. anyway i need just the bracket that attaches to the engine, can you sell it separately? how much shipped to 07801?

12-06-2008, 03:46 PM	#4
RJGeister Retired Air Force 87-09 Join Date: Feb 2007 Location: Bonaire, Georgia 31005 Posts: 284	Re: 250 I6 Power Seering Pump, Pulley and Brackets It looks like you're missing the twisted looking bracket that goes from the back to the block.

12-07-2008, 02:22 PM	#6
altunaa Registered User Join Date: Jan 2006 Location: Uruguay Posts: 101	Re: 250 I6 Power Seering Pump, Pulley and Brackets hi mosesburb, i will take it, do you accept paypal? if so, please pm your info. thanks, best regards

12-07-2008, 03:04 PM	#7
mosesburb I had a V-8 Join Date: May 2003 Location: Phoenix AZ Posts: 1,116	Re: 250 I6 Power Seering Pump, Pulley and Brackets PM sent __________________ 1972 K20 Suburban, 5.9L Cummins, Banks Power Pack, NV4500HD, NP205, H.A.D., D60/14FF ARB Link To Build: HERE.

12-07-2008, 06:07 PM	#8
altunaa Registered User Join Date: Jan 2006 Location: Uruguay Posts: 101	Re: 250 I6 Power Seering Pump, Pulley and Brackets hi mosesburb, already sent the payment and the shipping address in nj. as i have told you, i don't need the pump and pulley, so you can keep them, maybe someone else is looking for one of those. thanks again, best regards, arturo



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.