need a measurement... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dubdeuce80 · 12-06-2008, 01:00 AM

how much room is there from the back of the frame, to the end of the bed floor?

i'm gonna be doing a back half, but the bed i had was rusted out so there was no way to get a measurement...i don't wanna make the frame too long lol

dubdeuce80 · 12-06-2008, 06:41 PM

bumpity bump plz

67arch · 12-06-2008, 06:47 PM

I'll try to get one tonight for you.

**Stocker** · 12-06-2008, 08:42 PM

Looks like 3 3/4".... hard to be exact, I can't get the tape perfectly straight b/c there's a piece of metal side-to-side behind the ends of the frame rails.

edit: That's on my '72 LWB... you didn't say which truck, if it makes a difference

FRENCHBLUE72 · 12-06-2008, 09:05 PM

I have the bed off my truck right now do you just need from the last bolt hole or from the cab wall to the frame end?

67arch · 12-07-2008, 12:20 PM

I got 4" from the end of bed floor to end of frame rail. The bed support bolts to the very end of the frame so looks like a little longer frame ok but a little shorter and you'll end up fabbing some mounts. Hope this helps. If you need pics I can get some.

on a 67 long

dubdeuce80 · 12-07-2008, 01:18 PM

Quote:

Originally Posted by Stocker

Looks like 3 3/4".... hard to be exact, I can't get the tape perfectly straight b/c there's a piece of metal side-to-side behind the ends of the frame rails.

edit: That's on my '72 LWB... you didn't say which truck, if it makes a difference

Quote:

Originally Posted by 67arch

I got 4" from the end of bed floor to end of frame rail. The bed support bolts to the very end of the frame so looks like a little longer frame ok but a little shorter and you'll end up fabbing some mounts. Hope this helps. If you need pics I can get some.

on a 67 long

cool thanks, sounds like i have between 3-4" of play then. 67arch, when you get a chance can you snap some pics? no real rush as i have quite a few other things on the to do list...

Quote:

Originally Posted by FRENCHBLUE72

I have the bed off my truck right now do you just need from the last bolt hole or from the cab wall to the frame end?

i needed from where the frame ends, to where the bed floor ends, but stocker and 67 got it taken care of...thanks though!

67arch · 12-09-2008, 10:08 PM

Here's some pics for you. Hope they help, let me know if you need something else.

dubdeuce80 · 12-09-2008, 10:19 PM

that works perfect, thanks man. i just wanted to make sure i had a few more inches in the back, since the gas tank i have is slightly bigger than the stock frame allows

12-06-2008, 01:00 AM	#1
dubdeuce80 Registered User Join Date: Feb 2007 Location: Arizona Posts: 213	need a measurement... how much room is there from the back of the frame, to the end of the bed floor? i'm gonna be doing a back half, but the bed i had was rusted out so there was no way to get a measurement...i don't wanna make the frame too long lol

12-06-2008, 06:41 PM	#2
dubdeuce80 Registered User Join Date: Feb 2007 Location: Arizona Posts: 213	Re: need a measurement... bumpity bump plz

12-06-2008, 06:47 PM	#3
67arch WTB:Patience and Talent Join Date: Sep 2006 Location: Oklahoma Posts: 119	Re: need a measurement... I'll try to get one tonight for you. __________________ 69 shortwide

12-06-2008, 08:42 PM	#4
Stocker 20' Daredevil (Ret) Join Date: May 2003 Location: Jefferson State Posts: 13,722	Re: need a measurement... Looks like 3 3/4".... hard to be exact, I can't get the tape perfectly straight b/c there's a piece of metal side-to-side behind the ends of the frame rails. edit: That's on my '72 LWB... you didn't say which truck, if it makes a difference __________________ - Mike - 1972 K20 LWB 350/350/205 RIP El Jay Last edited by Stocker; 12-06-2008 at 08:46 PM.

12-06-2008, 09:05 PM	#5
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: need a measurement... I have the bed off my truck right now do you just need from the last bolt hole or from the cab wall to the frame end? __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-07-2008, 12:20 PM	#6
67arch WTB:Patience and Talent Join Date: Sep 2006 Location: Oklahoma Posts: 119	Re: need a measurement... I got 4" from the end of bed floor to end of frame rail. The bed support bolts to the very end of the frame so looks like a little longer frame ok but a little shorter and you'll end up fabbing some mounts. Hope this helps. If you need pics I can get some. on a 67 long __________________ 69 shortwide Last edited by 67arch; 12-07-2008 at 12:21 PM. Reason: type of bed

12-09-2008, 10:08 PM	#8
67arch WTB:Patience and Talent Join Date: Sep 2006 Location: Oklahoma Posts: 119	Re: need a measurement... Here's some pics for you. Hope they help, let me know if you need something else. Attached Images __________________ 69 shortwide

12-09-2008, 10:19 PM	#9
dubdeuce80 Registered User Join Date: Feb 2007 Location: Arizona Posts: 213	Re: need a measurement... that works perfect, thanks man. i just wanted to make sure i had a few more inches in the back, since the gas tank i have is slightly bigger than the stock frame allows



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.