Can anyone I.D. this gas tank? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gulfcoast66 · 12-09-2008, 10:51 AM

Can anyone i.d. this tank? Im thinking about using it between the frame rails in the back. Its 30in long x 19in wide and 13in tall with a 1 1/4 O.D. filler pipe. Its a bit rust on the outside but the inside is good and clean, I want to buy a sending unit for it but i dont know what it come out of, I got it from someone who dont know what it come out of. Any help would be great, Thanks Chris..

gulfcoast66 · 12-09-2008, 10:53 AM

[IMG]

[/IMG]

gulfcoast66 · 12-09-2008, 10:54 AM

[IMG]

[/IMG]

gulfcoast66 · 12-09-2008, 10:55 AM

[IMG]

[/IMG]

**Captainfab** · 12-09-2008, 12:23 PM

It looks to me like a '69-'72 Blazer tank, which is what is the popular one to retrofit into these trucks. If it has a rounded indent on the lower back side for the spare tire then it is out of a '63-'66 Suburban. IIRC if it is a Blazer tank you'll need to switch the sending unit to a 0-30 ohm sender. Someone correct me if I'm wrong on that.

Demmit_Hemmit's 65 · 12-09-2008, 01:24 PM

Captain.........................I believe you ars correct.............took the one off of my burb and it had the indent for the spare................replaced it with a new one from a blazer ...................it was a good investment...............Hemmit

gulfcoast66 · 12-10-2008, 09:13 AM

Thanks, is the 0-30 ohm sending unit in a 63-66 burban tank........If so will it fit in the blazer tank with out welding or mod.......Thanks Chris........

Demmit_Hemmit's 65 · 12-10-2008, 09:26 AM

Yes, the 0-30 ohm sender is what you need for a 63-66 ...Not sure if it's the same size as the one for the blazer tank.................you might try calling gmc paul and ask him to measure a tank for you to compare......Hemmit

gulfcoast66 · 12-10-2008, 09:35 AM

Thanks Demmit 4........ your help. I better find out before i buy one and it dont.........fit the tank i have , Do you have any pics of your tank or wow its mounted?......... for ideas to hang mine....... Chris........

Demmit_Hemmit's 65 · 12-10-2008, 04:24 PM

Gulf..............When i get a chance i'll go out and get a picture of mine mounted on my burb for you so you can see how mine is mounted........Hemmit

gulfcoast66 · 12-10-2008, 06:20 PM

Thanks Demmt,.............I appreciate it ......Chris

**Captainfab** · 12-11-2008, 12:11 AM

The best I can tell is the Blazer tank is aprox 1 1/4" deeper than the '63-'66 Suburban tank. The sending unit flange is the same however. Most of the truck parts suppliers will have the 0-30 ohm sending unit for the Blazer tank.
Here's what LMC has, but it doesn't specify that it is 0-30 ohms. It is however listed for '63-'66 trucks.
http://www.lmctruck.com/ICATALOG/CBE/full.aspx?Page=71

12-09-2008, 10:51 AM	#1
gulfcoast66 64-66 CHEVY JUNKIE Join Date: Apr 2007 Location: Cypress ,Texas Posts: 1,516	Can anyone I.D. this gas tank? Can anyone i.d. this tank? Im thinking about using it between the frame rails in the back. Its 30in long x 19in wide and 13in tall with a 1 1/4 O.D. filler pipe. Its a bit rust on the outside but the inside is good and clean, I want to buy a sending unit for it but i dont know what it come out of, I got it from someone who dont know what it come out of. Any help would be great, Thanks Chris.. __________________ 1966 C-10 Fleetside LWB, 350 Lt1 4l60-E 2008 Silverado Crew Cab, 4.8 4l60-E 1998 GMC Yukon 4x4 L-31 Vortec, 4l60-E 2017 GMC Serra 4x4 5.3 Vortec, 4l60-E Do It In A Chevrolet

12-09-2008, 10:53 AM	#2
gulfcoast66 64-66 CHEVY JUNKIE Join Date: Apr 2007 Location: Cypress ,Texas Posts: 1,516	Re: Can anyone I.D. this gas tank? [IMG][/IMG] __________________ 1966 C-10 Fleetside LWB, 350 Lt1 4l60-E 2008 Silverado Crew Cab, 4.8 4l60-E 1998 GMC Yukon 4x4 L-31 Vortec, 4l60-E 2017 GMC Serra 4x4 5.3 Vortec, 4l60-E Do It In A Chevrolet

12-09-2008, 10:54 AM	#3
gulfcoast66 64-66 CHEVY JUNKIE Join Date: Apr 2007 Location: Cypress ,Texas Posts: 1,516	Re: Can anyone I.D. this gas tank? [IMG][/IMG] __________________ 1966 C-10 Fleetside LWB, 350 Lt1 4l60-E 2008 Silverado Crew Cab, 4.8 4l60-E 1998 GMC Yukon 4x4 L-31 Vortec, 4l60-E 2017 GMC Serra 4x4 5.3 Vortec, 4l60-E Do It In A Chevrolet

12-09-2008, 10:55 AM	#4
gulfcoast66 64-66 CHEVY JUNKIE Join Date: Apr 2007 Location: Cypress ,Texas Posts: 1,516	Re: Can anyone I.D. this gas tank? [IMG][/IMG] __________________ 1966 C-10 Fleetside LWB, 350 Lt1 4l60-E 2008 Silverado Crew Cab, 4.8 4l60-E 1998 GMC Yukon 4x4 L-31 Vortec, 4l60-E 2017 GMC Serra 4x4 5.3 Vortec, 4l60-E Do It In A Chevrolet

12-09-2008, 12:23 PM	#5
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: Can anyone I.D. this gas tank? It looks to me like a '69-'72 Blazer tank, which is what is the popular one to retrofit into these trucks. If it has a rounded indent on the lower back side for the spare tire then it is out of a '63-'66 Suburban. IIRC if it is a Blazer tank you'll need to switch the sending unit to a 0-30 ohm sender. Someone correct me if I'm wrong on that. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

12-09-2008, 01:24 PM	#6
Demmit_Hemmit's 65 Senior Member Join Date: Mar 2002 Location: Peru, Indiana Posts: 741	Re: Can anyone I.D. this gas tank? Captain.........................I believe you ars correct.............took the one off of my burb and it had the indent for the spare................replaced it with a new one from a blazer ...................it was a good investment...............Hemmit

12-10-2008, 09:13 AM	#7
gulfcoast66 64-66 CHEVY JUNKIE Join Date: Apr 2007 Location: Cypress ,Texas Posts: 1,516	Re: Can anyone I.D. this gas tank? Thanks, is the 0-30 ohm sending unit in a 63-66 burban tank........If so will it fit in the blazer tank with out welding or mod.......Thanks Chris........ __________________ 1966 C-10 Fleetside LWB, 350 Lt1 4l60-E 2008 Silverado Crew Cab, 4.8 4l60-E 1998 GMC Yukon 4x4 L-31 Vortec, 4l60-E 2017 GMC Serra 4x4 5.3 Vortec, 4l60-E Do It In A Chevrolet

12-10-2008, 09:26 AM	#8
Demmit_Hemmit's 65 Senior Member Join Date: Mar 2002 Location: Peru, Indiana Posts: 741	Re: Can anyone I.D. this gas tank? Yes, the 0-30 ohm sender is what you need for a 63-66 ...Not sure if it's the same size as the one for the blazer tank.................you might try calling gmc paul and ask him to measure a tank for you to compare......Hemmit

12-10-2008, 09:35 AM	#9
gulfcoast66 64-66 CHEVY JUNKIE Join Date: Apr 2007 Location: Cypress ,Texas Posts: 1,516	Re: Can anyone I.D. this gas tank? Thanks Demmit 4........ your help. I better find out before i buy one and it dont.........fit the tank i have , Do you have any pics of your tank or wow its mounted?......... for ideas to hang mine....... Chris........ __________________ 1966 C-10 Fleetside LWB, 350 Lt1 4l60-E 2008 Silverado Crew Cab, 4.8 4l60-E 1998 GMC Yukon 4x4 L-31 Vortec, 4l60-E 2017 GMC Serra 4x4 5.3 Vortec, 4l60-E Do It In A Chevrolet

12-10-2008, 04:24 PM	#10
Demmit_Hemmit's 65 Senior Member Join Date: Mar 2002 Location: Peru, Indiana Posts: 741	Re: Can anyone I.D. this gas tank? Gulf..............When i get a chance i'll go out and get a picture of mine mounted on my burb for you so you can see how mine is mounted........Hemmit

12-10-2008, 06:20 PM	#11
gulfcoast66 64-66 CHEVY JUNKIE Join Date: Apr 2007 Location: Cypress ,Texas Posts: 1,516	Re: Can anyone I.D. this gas tank? Thanks Demmt,.............I appreciate it ......Chris __________________ 1966 C-10 Fleetside LWB, 350 Lt1 4l60-E 2008 Silverado Crew Cab, 4.8 4l60-E 1998 GMC Yukon 4x4 L-31 Vortec, 4l60-E 2017 GMC Serra 4x4 5.3 Vortec, 4l60-E Do It In A Chevrolet

12-11-2008, 12:11 AM	#12
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: Can anyone I.D. this gas tank? The best I can tell is the Blazer tank is aprox 1 1/4" deeper than the '63-'66 Suburban tank. The sending unit flange is the same however. Most of the truck parts suppliers will have the 0-30 ohm sending unit for the Blazer tank. Here's what LMC has, but it doesn't specify that it is 0-30 ohms. It is however listed for '63-'66 trucks. http://www.lmctruck.com/ICATALOG/CBE/full.aspx?Page=71 __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE Last edited by Captainfab; 12-11-2008 at 12:19 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.