Complete running 292 engine in DFW area - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tx Firefighter · 02-12-2006, 07:26 AM

I just pulled the 292 out of my truck.

It's a complete running engine. I have done within the last 6 months:

new fuel pump
new water pump
new thermostat
new valve cover gasket
new intake/ exhaust manifold gaskets
rebuilt the carburetor
HEI distributor
new spark plugs

I'm selling it complete with the correct 292 frame mounts. Has an automatic flywheel and matching starter. Has alternator and belt too.

Air cleaner does not go with the engine. If you want the air cleaner, it's an extra 50 bucks.

Price is 350 dollars for the engine. Will trade for stuff too. Tell me what you have to offer.

SCOTI · 02-12-2006, 01:43 PM

TX, what's going on w/the beater?

jsbgump · 02-12-2006, 02:36 PM

What kind of milage does the motor have on it? I would be interested in it. i am just waiting on the income tax check to come in should get it in a week

Tx Firefighter · 02-12-2006, 03:04 PM

Scoti, the beater got a 350 and turbo 350 auto last week. I'm thrashing full speed ahead to make Decatur as the maiden voyage. My wife is going to fight with the ladies at the courthouse tomorrow to get my antique plates approved and registered.

jsbgump, the engine has unknown mileage. I got it from member teeitup 13 months ago. What I do know is, it was a Kansas school district truck originaly. When I got it, some things looked fresh. The starter was fresh rebuilt. It had NAPA Gold filters on it, NAPA belt, all of that. I've never known a school district truck to get very many miles on it, or miss out on any maintenance, so I had good confidence.

Basically, a running , rebuildable 292 core is worth about 300 bucks from what I see selling nowdays. I'm including the 292 engine mounts which are also kind of rare, they are specific to 292's only. I figure the whole deal is worth the 350, especially with the HEI and the other new stuff I've put on it.

jsbgump · 02-12-2006, 03:09 PM

Do you also have the engine harness for it?

Tx Firefighter · 02-12-2006, 03:11 PM

Wiring harness? No, I reused it on the 350.

By the way, I'll also throw in the standard trans flywheel and bolts with the engine if the buyer wants to use it in a standard application. The flywheel is 292 specific, as it uses 1/2 bolts rather than the usual 7/16 GM size bolts.

shaneschevys · 02-12-2006, 04:43 PM

If jsbgump doesnt get it would you consider trading a 88-98 step side bed for it?

Tx Firefighter · 02-12-2006, 04:47 PM

I don't need a bed right now, just money to finish some shop details.

shaneschevys · 02-13-2006, 01:48 AM

Had to ask.

olskoolchevy · 12-10-2008, 10:38 PM

Have you gotten rid of it yet?

Tx Firefighter · 12-10-2008, 10:48 PM

Yep, sold it 2 years ago. Sorry.

*chevy29267truck* · 12-11-2008, 11:32 PM

PM me on the 292 engine ive been looking for one for my 67 chevy truck i would want the air cleaner too

my67chevytruck · 12-12-2008, 12:24 AM

Quote:

Originally Posted by tx firefighter

yep, sold it 2 years ago. Sorry.

this is an old thread !

*chevy29267truck* · 12-12-2008, 12:26 AM

oh it is where can i find a good 292 at

olskoolchevy · 12-12-2008, 08:06 AM

Well whatdoya know, this thread is 2 years old. A smart person would have looked at the date but I don't usually fall in that category

my67chevytruck · 12-12-2008, 09:30 AM

Quote:

Originally Posted by chevy29267truck

oh it is where can i find a good 292 at

subscribe to the forum. then you can place a want to buy ad.

my67chevytruck · 12-12-2008, 09:31 AM

Quote:

Originally Posted by olskoolchevy

Well whatdoya know, this thread is 2 years old. A smart person would have looked at the date but I don't usually fall in that category

no disrespect meant. Just wanted to enlarge the Font so people would know this 292 is long gone!

olskoolchevy · 12-12-2008, 09:24 PM

None taken. But if you run across another 292, let me know. Maybe then I'll catch it a little sooner.

02-12-2006, 07:26 AM	#1
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Complete running 292 engine in DFW area I just pulled the 292 out of my truck. It's a complete running engine. I have done within the last 6 months: new fuel pump new water pump new thermostat new valve cover gasket new intake/ exhaust manifold gaskets rebuilt the carburetor HEI distributor new spark plugs I'm selling it complete with the correct 292 frame mounts. Has an automatic flywheel and matching starter. Has alternator and belt too. Air cleaner does not go with the engine. If you want the air cleaner, it's an extra 50 bucks. Price is 350 dollars for the engine. Will trade for stuff too. Tell me what you have to offer. Attached Images __________________ I'm on the Instagram- @Gearhead_Kevin

02-12-2006, 01:43 PM	#2
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,071	Re: Complete running 292 engine in DFW area TX, what's going on w/the beater? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

02-12-2006, 02:36 PM	#3
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: Complete running 292 engine in DFW area What kind of milage does the motor have on it? I would be interested in it. i am just waiting on the income tax check to come in should get it in a week __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

02-12-2006, 03:04 PM	#4
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: Complete running 292 engine in DFW area Scoti, the beater got a 350 and turbo 350 auto last week. I'm thrashing full speed ahead to make Decatur as the maiden voyage. My wife is going to fight with the ladies at the courthouse tomorrow to get my antique plates approved and registered. jsbgump, the engine has unknown mileage. I got it from member teeitup 13 months ago. What I do know is, it was a Kansas school district truck originaly. When I got it, some things looked fresh. The starter was fresh rebuilt. It had NAPA Gold filters on it, NAPA belt, all of that. I've never known a school district truck to get very many miles on it, or miss out on any maintenance, so I had good confidence. Basically, a running , rebuildable 292 core is worth about 300 bucks from what I see selling nowdays. I'm including the 292 engine mounts which are also kind of rare, they are specific to 292's only. I figure the whole deal is worth the 350, especially with the HEI and the other new stuff I've put on it. __________________ I'm on the Instagram- @Gearhead_Kevin

02-12-2006, 03:09 PM	#5
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: Complete running 292 engine in DFW area Do you also have the engine harness for it? __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

02-12-2006, 03:11 PM	#6
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: Complete running 292 engine in DFW area Wiring harness? No, I reused it on the 350. By the way, I'll also throw in the standard trans flywheel and bolts with the engine if the buyer wants to use it in a standard application. The flywheel is 292 specific, as it uses 1/2 bolts rather than the usual 7/16 GM size bolts. __________________ I'm on the Instagram- @Gearhead_Kevin

02-12-2006, 04:43 PM	#7
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Re: Complete running 292 engine in DFW area If jsbgump doesnt get it would you consider trading a 88-98 step side bed for it? __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club**

02-12-2006, 04:47 PM	#8
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: Complete running 292 engine in DFW area I don't need a bed right now, just money to finish some shop details. __________________ I'm on the Instagram- @Gearhead_Kevin

02-13-2006, 01:48 AM	#9
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Re: Complete running 292 engine in DFW area Had to ask. __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club**

12-10-2008, 10:38 PM	#10
olskoolchevy Registered User Join Date: Jul 2005 Location: Pasadena, TX Posts: 162	Re: Complete running 292 engine in DFW area Have you gotten rid of it yet?

12-10-2008, 10:48 PM	#11
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: Complete running 292 engine in DFW area Yep, sold it 2 years ago. Sorry. __________________ I'm on the Instagram- @Gearhead_Kevin

12-11-2008, 11:32 PM	#12
chevy29267truck Account Suspended Join Date: Sep 2008 Location: Alva Florida Posts: 668	Re: Complete running 292 engine in DFW area PM me on the 292 engine ive been looking for one for my 67 chevy truck i would want the air cleaner too

12-12-2008, 12:26 AM	#14
chevy29267truck Account Suspended Join Date: Sep 2008 Location: Alva Florida Posts: 668	Re: Complete running 292 engine in DFW area oh it is where can i find a good 292 at

12-12-2008, 08:06 AM	#15
olskoolchevy Registered User Join Date: Jul 2005 Location: Pasadena, TX Posts: 162	Re: Complete running 292 engine in DFW area Well whatdoya know, this thread is 2 years old. A smart person would have looked at the date but I don't usually fall in that category

12-12-2008, 09:24 PM	#18
olskoolchevy Registered User Join Date: Jul 2005 Location: Pasadena, TX Posts: 162	Re: Complete running 292 engine in DFW area None taken. But if you run across another 292, let me know. Maybe then I'll catch it a little sooner.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.